BOLTS and NUTS

Here we offer BOLTS and NUTS in various qualities and lengths

Evotech Front Caliper Bolt Set (Race) - BMW S 1000 R (2025+)
Evotech Front Caliper Bolt Set (Race) - BMW S 1000 R (2025+)
Features of the Evotech brake caliper bolt set (Race) for BMW 
You can see which BMW motorcycles this bolt set (4 pieces) fits here: MODELS
You can find help with installation here: INSTALLATION

• Manufactured in-house at Evotech Performance
• Hexagonal brake caliper bolts made of stainless steel: direct replacement for original bolts
• The model-specific design from EP corresponds to the original bolts in terms of length, thread and thread pitch, thus ensuring a secure fit.
• Austenitic 316 stainless steel (marine grade) for exceptional corrosion resistance
• Pre-drilled hexagonal head for use with lockwire
• 12 mm hex head
• Flange bolt head provides a secure seating surface
• The Evotech brake caliper bolt set contains all the bolts required to directly replace the original parts
• Independently tested in accordance with ISO 3506 by a UKAS ISO 17025 accredited testing laboratory
 
71,25 Dollar
incl. 19% tax excl. Shipping costs
Ducati Panigale / Streetfighter V4 Alu nuts for chainring carrier - 6 pieces - BLACK
Aluminium nut M10 x 1.00 for chainring carrier - 6 pieces - BLACK
Aluminium nut M10x1.00 for chainring carrier for Ducati Panigale / Streetfighter V4 etc.
The price is for 6 pieces. This is how many are needed for the chainring carrier
Tightening torque 35 Nm with threadlocker
37,50 Dollar
incl. 19% tax excl. Shipping costs
Ducati Panigale / Streetfighter V4 Alu nuts for chainring carrier - 6 pieces - RED
Aluminium nut M10 x 1.00 for chainring carrier - 6 pieces - RED
Aluminium nut M10x1.00 for chainring carrier for Ducati Panigale / Streetfighter V4 etc.
The price is for 6 pieces. This is how many are needed for the chainring carrier
Tightening torque 35 Nm with threadlocker
37,50 Dollar
incl. 19% tax excl. Shipping costs
Ducati M25x1.25 nut for front wheel axle RED by Evotech Italy
Ducati M25x1.25 nut for front wheel axle RED by Evotech Italy
Ducati M 25 x 1.25 nut for front wheel axle in RED by Evotech Italy
Width across flats 30 mm
Material: AL 7075 T6
Normal tightening torque.
33,75 Dollar
incl. 19% tax excl. Shipping costs
Ducati M25x1.25 nut for front wheel axle Black by Evotech Italy
Ducati M25x1.25 nut for front wheel axle RED by Evotech Italy - Kopie
Ducati M 25 x 1.25 nut for front wheel axle in BLACK by Evotech Italy
Width across flats 30 mm
Material: AL 7075 T6
Normal tightening torque.
33,75 Dollar
incl. 19% tax excl. Shipping costs
Brake calliper bolt set Race M10 x 55 mm stainless steel from Evotech Performance
Brake calliper bolt set Race M10 x 55 mm stainless steel from Evotech Performance
Brake calliper bolt set Race M10 x 55 mm stainless steel from Evotech Performance
Scope of delivery: 4 pieces - Currently intended for Honda CB 500 / 650 / 1000.
Look under MODELS to see if your motorbike is included.
Be sure to watch the video: INSTALLATION
- In-house production at Evotech Performance
- Stainless steel brake calliper bolts with hexagon head: direct replacement for OE bolts
- EP's model-specific design replicates bolt length, thread and thread pitch for a secure fit
- 316 austenitic stainless steel (marine grade) for exceptional corrosion resistance
- Pre-drilled hex head for safety wire (lockwire)
- 12mm hex head
- Flange bolt head provides secure bearing surface
- Evotech front brake caliper bolt kit includes all required bolts for direct replacement of OE parts
- Independently tested to ISO 3506 by a UKAS ISO 17025 accredited test centre
71,25 Dollar
incl. 19% tax excl. Shipping costs
Rear axle nut black duralumin for Ducati Streetfighter V4 by Evotech Italy
Ducati Streetfighter V4 / Triumph Rear axle nut black duralumin by Evotech Italy
Very high quality duraluminium nut (7075T6) for the rear wheel of the Ducati Streetfighter V4 from 2020.
Machined on CNC-controlled machines, a great design and a refined look can be realised.
The 6 bulges and the 6 frontal holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The mounting is done with a standard ring spanner or nut.
Supplied with: 1 x rear axle nut with 55 mm spanner size.
58,75 Dollar
incl. 19% tax excl. Shipping costs
Rear axle nut M48x1.5 RED Duraluminium Evotech Italien
Rear axle nut M48x1.5 RED Duraluminium Evotech Italien
Very high quality duraluminium nut (7075T6) for the rear wheel
Machined on CNC-controlled machines, a great design and a refined look can be realised.
The 6 bulges and the 6 frontal holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The mounting is done with a standard ring spanner or nut.
Supplied with: 1 x rear axle nut with 55 mm spanner size.
58,75 Dollar
incl. 19% tax excl. Shipping costs
Front brake caliper bolt set (Race) from Evotech Performance
Front brake caliper bolt set (Race) from Evotech Performance
Front brake caliper bolt set (Race) from Evotech Performance
Shank length : 55 mm
Suitable for the following MODELS

- Manufactured in-house by Evotech Performance
- Stainless steel brake calliper bolts with hexagon head: direct replacement for the original bolts
- EP's model specific design replicates bolt length, thread and thread pitch for a secure fit
- 316 austenitic stainless steel (marine grade) for exceptional corrosion resistance
- Pre-drilled hex head for safety wire (lockwire)
- 12mm hex head
- Flanged bolt head provides secure bearing surface
- Evotech front brake caliper bolt kit includes all required bolts for direct replacement of OE parts
- Independently tested to ISO 3506 by a UKAS ISO 17025 accredited test centre
 
71,25 Dollar
incl. 19% tax excl. Shipping costs
front brake caliper bolt set (Street) from Evotech Performance
Front brake caliper bolt set (Street) from Evotech Performance
Front brake caliper bolt set (Street) from Evotech Performance
Shank length : 55 mm
Suitable for the following MODELS

- Manufactured in-house by Evotech Performance
- Stainless steel caliper bolts with round head: direct replacement for original bolts
- EP's model specific design replicates bolt length, thread and pitch for a secure fit
- 316 austenitic stainless steel (marine grade) for exceptional corrosion resistance
- Rolled threads for increased durability
- 8mm Allen key head
- The Evotech front brake caliper bolt set provides a complete set of bolts for your motorbike
- Independently tested to ISO 3506 by a UKAS ISO 17025 accredited test centre
 
61,25 Dollar
incl. 19% tax excl. Shipping costs
Screw set for clutch cover KTM 1290 by Evotech Italy
Screw for clutch cover KTM 1290/1390 by Evotech Italy - ORANGE
1290
Aluminium screws M6 for clutch cover KTM 1290 made of Ergal 7075 from Evotech Italy
You will need the following range of screws:
For the standard clutch cover you need: 1 x 90 mm, 2 x 85 mm, 1 x 30 mm, 1 x 25 mm
For additional assembly of PRO-09-01 you need: 2 x 90 mm, 1 x 85 mm, 2 x 30 mm
For the EVOTECH clutch cover you need: 3 x 85 mm, 2 x 25 mm
For additional assembly of PRO-09-01 you need: 1 x 25 mm, 1 x 30 mm, 2 x 85 mm, 1 x 90 mm

1390
Aluminium screws M6 for clutch cover KTM 1390 made of Ergal 7075 from Evotech Italy
You will need the following range of screws:
For the EVOTECH clutch cover you need: 3 x 80 mm, 2 x 25 mm
For additional installation of PRO-09-01 you need: 1 x 25 mm, 1 x 30 mm, 2 x 80 mm, 1 x 85 mm

Tightening torques: 8 NM
from 2,88 Dollar
incl. 19% tax excl. Shipping costs
Screw set for clutch cover KTM 1290 by Evotech Italy
Screw for clutch cover KTM 1290/1390 by Evotech Italy - Black
1290
Aluminium screws M6 for clutch cover KTM 1290 made of Ergal 7075 from Evotech Italy
You will need the following range of screws:
For the standard clutch cover you need: 1 x 90 mm, 2 x 85 mm, 1 x 30 mm, 1 x 25 mm
For additional assembly of PRO-09-01 you need: 2 x 90 mm, 1 x 85 mm, 2 x 30 mm
For the EVOTECH clutch cover you need: 3 x 85 mm, 2 x 25 mm
For additional assembly of PRO-09-01 you need: 1 x 25 mm, 1 x 30 mm, 2 x 85 mm, 1 x 90 mm

1390
Aluminium screws M6 for clutch cover KTM 1390 made of Ergal 7075 from Evotech Italy
You will need the following range of screws:
For the EVOTECH clutch cover you need: 3 x 80 mm, 2 x 25 mm
For additional installation of PRO-09-01 you need: 1 x 25 mm, 1 x 30 mm, 2 x 80 mm, 1 x 85 mm

Tightening torques: 8 NM
from 2,88 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 engine bolt set - 36 pcs. black anodised by Evotech Italy
KTM 1290 engine bolt set - 36 pcs. black anodised by Evotech Italy
KTM 1290 engine bolt set M6 - 36 pcs. black anodised by Evotech Italy
Duraluminium screws in Ergal 7075 T6 for the engine.
This kit contains screws of the same length as the original screws.
Please unscrew one original screw at a time and replace it with the duraluminium screw.
Please do not unscrew all screws at once.
It is also recommended to oil or grease the thread of the screws accordingly during assembly.
Tightening torque: 8 NM
Price per screw: 3,02 €
136,25 Dollar
incl. 19% tax excl. Shipping costs
Aluminium screws M5 x 30 for the tank cap KTM 1290 made of Ergal 7075 by Evotech Italy
6 Aluminium screws M5 x 30 for the tank cap KTM 1290 made of Ergal 7075 by Evotech Italy
Aluminium screws M5 x 30 for the tank cap KTM 1290 made of Ergal 7075 by Evotech Italy
Tightening torque: 5 NM
Also fits Ducati Multistrada 1200/1260 and Hypermotard 950
16,25 Dollar
incl. 19% tax excl. Shipping costs
Stainless steel screw and nut set for licence plate
Stainless steel screw and nut set for licence plate
The set (12 parts) consists of:
2 x M6x16 countersunk screw
2 x M5x10 countersunk screw
2 x M5x12 pan-head screw
2 x M6 hexagon nut
4 x M5 hexagon nut
This gives you a complete screw/nut set if you use our IDENTIFICATION PLATE and the REFLECTOR KIT.
3,75 Dollar
incl. 19% tax excl. Shipping costs
EVOTECHPARTS Alloy nut M10x1.25 for chainring carrier KTM 1290 SDR / GT
M10x1.25 EP Alloy nut M10x1.25 for chainring carrier
Aluminium nut set M10x1.25 (6026 T 6 - high strength)
in ORANGE anodised for original chainring carrier or the chainring carrier shown in the other photos.
The price is for 1 nut in orange
For the KTM 1290 SDR / GT
(6 pieces are required)
Tightening torque 45 Nm
6,25 Dollar
incl. 19% tax excl. Shipping costs
Evotech nut set black (6 pcs.) M10x1,25 chainring carrier KTM 1290 SDR / GT
M10x1,25 Evotech nut set black (6 pcs.) chainring carrier
Aluminium nut set M10x1.25 ( Ergal 7075 T 6 - high strength)
in BLACK anodised for original chainring carrier or the chainring carrier.
Tightening torque 45 Nm
37,50 Dollar
incl. 19% tax excl. Shipping costs
Evotech nut set RED (6 pcs.) M10x1,25 chainring carrier KTM 1290 SDR / GT
M10x1,25 Evotech nut set RED (6 pcs.) chainring carrier
Aluminium nut set M10x1.25 ( Ergal 7075 T 6 - high strength)
in RED anodised for original chainring carrier or the chainring carrier shown on the other photos.
Tightening torque 45 Nm
37,50 Dollar
incl. 19% tax excl. Shipping costs
Evotech nut set ORANGE (6 pcs.) M10x1,25 chainring carrier KTM 1290 SDR / GT
M10x1,25 Evotech nut set ORANGE (6 pcs.) chainring carrier KTM 1290 SDR / GT
Aluminium nut set M10x1.25 ( Ergal 7075 T 6 - high strength)
in ORANGE anodised for original chainring carrier or the chainring carrier shown on the other photos.
Tightening torque 35 Nm  with screw lock
37,50 Dollar
incl. 19% tax excl. Shipping costs
Evotech nut set ORANGE (6 pcs.) M8x1,25 chainring KTM 1290 SDR / GT
M8x1,25 Evotech nut set ORANGE (6 pcs.) chainring
Aluminium nut set M8x1.25 ( Ergal 7075 T 6 - high strength)
in ORANGE anodised for the chainring.
Tightening torque 35 Nm with threadlocker
37,50 Dollar
incl. 19% tax excl. Shipping costs
Evotech nut set BLACK (6 pcs.) M8x1,25 chainring KTM 1290 SDR / GT
M8x1,25 Evotech nut set BLACK (6 pcs.) chainring
Aluminium nut set M8x1.25 ( Ergal 7075 T 6 - high strength)
in BLACK anodised for the chainring.
Tightening torque 35 Nm with threadlocker
37,50 Dollar
incl. 19% tax excl. Shipping costs
Evotech nut ORANGE (1 pcs.) M8x1,25 chainring KTM 1290 SDR / GT
M8x1,25 Evotech nut ORANGE (1 pcs.) chainring
Aluminium nut M8x1.25 ( Ergal 7075 T 6 - high strength)
in ORANGE anodised for the chainring.
Tightening torque 35 Nm with threadlocker
7,50 Dollar
incl. 19% tax excl. Shipping costs
Evotech nut BLACK (1 pcs.) M8x1,25 chainring KTM 1290 SDR / GT
M8x1,25 Evotech nut set BLACK (1 pcs.) chainring
Aluminium nut M8x1.25 ( Ergal 7075 T 6 - high strength)
in BLACK anodised for the chainring.
Tightening torque 35 Nm with threadlocker
1 Pieces
7,50 Dollar
incl. 19% tax excl. Shipping costs
M5 flange nuts DIN 6923 A2 stainless steel with locking teeth
M5 flange nuts DIN 6923 A2 stainless steel with locking teeth
M5 flange nuts DIN 6923 A2 stainless steel with locking teeth

    Flange nuts
    DIN 6923 A2 stainless steel
    with locking teeth
0,25 Dollar
incl. 19% tax excl. Shipping costs
M6 flange nuts DIN 6923 A2 stainless steel with locking teeth
M6 flange nuts DIN 6923 A2 stainless steel with locking teeth
M6 flange nuts DIN 6923 A2 stainless steel with locking teeth

    Flange nuts
    DIN 6923 A2 stainless steel
    with locking teeth
0,25 Dollar
incl. 19% tax excl. Shipping costs
M6-countersunk-screws-10---12---16-mm-TORX-stainless-steel-A2---DIN-965--ISO-14581
M6 countersunk screws 10 / 12 / 16 mm TORX stainless steel A2 (~DIN 965) ISO 14581
M6 countersunk screws 10 / 12 / 16 mm TORX stainless steel A2 (~DIN 965) ISO 14581

    ISO 14581 (~DIN 685)
    with TORX drive
    Countersunk head
    The specified length refers to the total length incl. countersunk head
from 0,50 Dollar
incl. 19% tax excl. Shipping costs
M5 pan-head screws 10 or 12 mm TORX stainless steel A2 ISO 7380
M5 pan-head screws 10 or 12 mm TORX stainless steel A2 ISO 7380
M5 pan-head screws 10 or 12 mm TORX stainless steel A2 ISO 7380

    Pan head screws
    Stainless steel A2
    ISO 7380
    Torx drive
    The length specification refers to the thread length
from 0,44 Dollar
incl. 19% tax excl. Shipping costs
M5 countersunk screws 8 or 10 mm TORX stainless steel A2 (~DIN 965) ISO 14581
M5 countersunk screws 8 or 10 mm TORX stainless steel A2 (~DIN 965) ISO 14581
M5 countersunk screws 8 or 10 mm TORX stainless steel A2 (~DIN 965) ISO 14581

    ISO 14581 (~DIN 685)
    with TORX drive
    Countersunk head
    The specified length refers to the total length incl. countersunk head
from 0,44 Dollar
incl. 19% tax excl. Shipping costs
M5 x 16 mm stainless steel screws with pan head, black (1 pair)
M5 x 16 mm stainless steel screws with pan head, black (1 pair)
M5 x 16 mm stainless steel screws with pan head, black (1 pair)

    Pan head screws
    Stainless steel A2 black
    ISO 7380
    Allen key
    The length specification refers to the thread length
2,50 Dollar
incl. 19% tax excl. Shipping costs
M5 x 45 mm stainless steel screws with pan head, black (1 pair)
M5 x 45 mm stainless steel screws with pan head, black (1 pair)
M5 x 45 mm stainless steel screws with pan head, black (1 pair)

    Pan head screws
    Stainless steel A2 black
    ISO 7380
    Allen key
    The length specification refers to the thread length
2,75 Dollar
incl. 19% tax excl. Shipping costs
Wing screw M5 x 16 mm 1 piece from EVOTECHPARTS
Wing screw M5 x 16 mm 1 piece from EVOTECHPARTS
This wing screw is suitable for the navigation holders from Evotech Performance.
With thread M5 x 16 mm.
Scope of delivery 1 piece.
2,50 Dollar
incl. 19% tax excl. Shipping costs
1 to 31 (from a total of 31)
Here we offer BOLTS and NUTS in various qualities and lengths