Ducati / Aprilia brake calliper spacer titanium 4 pieces from Evotech Performance
Ducati / Aprilia brake calliper spacer titanium 4 pieces from Evotech Performance
Ducati / Aprilia brake calliper spacer titanium 4 pieces from Evotech Performance

Ducati / Aprilia brake calliper spacer titanium 4 pieces from Evotech Performance

Product No.:
PRN016448-S6
Shipping time:
immediately ready for dispatch immediately ready for dispatch (abroad may vary)
Weight:
0.1 kg per piece
55,35 Dollar

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description
Evotech Performance has manufactured titanium brake caliper spacers to allow the removal of Ducati brake caliper reflectors (82718851AA and 82718841AA)
Suitable for the following MODELS
CNC machined from aerospace grade titanium. 3.5 grams of titanium per piece.
No modifications to your motorbike are required.
Simply unscrew, remove, replace and ride.
Easy to understand, illustrated instructions are available for download: INSTALLATION

All intellectual property rights are owned by Drury Precision Engineering Limited. Any infringement will be vigorously pursued. The Evotech Performance® brand name and the EP® logo are both registered trademarks of Drury Precision Engineering Ltd.
Products Safety/TÜV
Product safety : 
Manufacturer:
Evotech Performance
8 Beechings Way, Alford, Lincolnshire, LN13 9JE
+44(0) 1507 466729
sales@evotech-performance.com

Importer / first distributor:
EVOTECH GERMANY
Lothar Westphal
Eichendorffstr. 9
78239 Rielasingen
Tel.07731 8229019
mail @ evotechparts.com

General safety instructions for the product:
We recommend that you always consult a specialist workshop when installing our products or have this work carried out by a specialist. If you fit it yourself, please make sure that your motorbike is secure and that the product is only intended for your motorbike. The models for which the product is tested and intended can be found with each item.
To avoid damage to your motorbike during installation, we recommend covering all important/sensitive parts.
Please understand that we cannot accept any liability for consequential damage caused by improper installation.
When fitting, use threadlocker if possible and observe the torque specifications.
There is no ABE/parts certificate for Evotech Performance accessories. If you have any concerns, you should refrain from buying them. In some cases, bolts for fastening must be replaced with the original bolts. Legally, this could be a problem. We would like to point this out.
General torque specifications can be found HERE
Customer reviews

Unfortunately there are no reviews yet. Be the first who rates this product.

Customers who bought this product bought also the following products:

Ducati Panigale V2 radiator guard from 2020 by Evotech Performance
Ducati Panigale V2 radiator guard from 2020...
This radiator guard fits the following MODELS
The clever design of Evotech Performance allows the upper radiator guard to be mounted without dismantling the fairings.
The elegantly designed matrix is pierced with hexagonal holes to optimize airflow while providing maximum protection from road debris.
The Ducati Panigale's upper radiator guard features a remarkable strength-to-weight ratio and weighs 130 grams.
INSTALLATION
107,01 Dollar
Ducati Panigale V4 , R, S, S Corse from 2018, Streetfighter V2 from 2022 license plate holder from Evotech Performance
Ducati Panigale V4 , V2 from 2018, Streetfighter...
This license plate holder from EVOTECH PERFORMANCE for your DUCATI PANIGALE from 2018 and Streetfighter V2 from 2022 is CNC machined from lightweight aircraft aluminum.
Finished with a tough satin black powder coat.
Suitable for the following MODELS
The original turn signals can still be used.
The LED number plate lighting is included in the scope of delivery.
This license plate holder was developed especially for the existing holders on your DUCATI Panigale / Streefighter and does not require any changes on your motorcycle.
No changes to the wiring are necessary, just plug and play.
All necessary mountings are included in the delivery.
The licence plate angle is approx. 40 degrees. The reflector kit is included
If you need a reinforced noble number plate, look HERE
An easy to understand illustrated manual is available here: INSTALLATION
343,17 Dollar
Ducati Panigale / Streetfighter V4 Radiator Guard Set 2018+ from Evotech Performance
Ducati Panigale / Streetfighter V4 Radiator...
This radiator guard from EVOTECH Performance fits exactly on the existing mounting points on your
Panigale V4 2018+,  V4 S 2018+,  V4 Speciale 2018+,  V4 R 2019+,  V4 S Corse 2019 +
Streetfighter V4 2020 +,  V4 S 2020+
If you want to be sure if your model is included, have a look HERE
No changes are necessary when mounting the motorcycle.
INSTALLATION  Panigale
INSTALLATION  Streetfigher
183,27 Dollar
Front brake caliper bolt set (Race) from Evotech Performance
Front brake caliper bolt set (Race) from...
Front brake caliper bolt set (Race) from Evotech Performance
Shank length : 55 mm
Suitable for the following MODELS

- Manufactured in-house by Evotech Performance
- Stainless steel brake calliper bolts with hexagon head: direct replacement for the original bolts
- EP's model specific design replicates bolt length, thread and thread pitch for a secure fit
- 316 austenitic stainless steel (marine grade) for exceptional corrosion resistance
- Pre-drilled hex head for safety wire (lockwire)
- 12mm hex head
- Flanged bolt head provides secure bearing surface
- Evotech front brake caliper bolt kit includes all required bolts for direct replacement of OE parts
- Independently tested to ISO 3506 by a UKAS ISO 17025 accredited test centre
 
68,88 Dollar
This product was added to our catalog on Friday, July 5, 2024.