MAIN PAGE » DUCATI » Panigale V4 » Panigale 2018 - 2024

Panigale 2018 - 2024

Ducati Panigale V4 , R, S, S Corse from 2018, Streetfighter V2 from 2022 license plate holder from Evotech Performance

Ducati Panigale V4 , V2 from 2018, Streetfighter V2 from 2022 license plate holder from Evotech Performance

This license plate holder from EVOTECH PERFORMANCE for your DUCATI PANIGALE from 2018 and Streetfighter V2 from 2022 is CNC machined from lightweight aircraft aluminum.
Finished with a tough satin black powder coat.
Suitable for the following MODELS
The original turn signals can still be used.
The LED number plate lighting is included in the scope of delivery.
This license plate holder was developed especially for the existing holders on your DUCATI Panigale / Streefighter and does not require any changes on your motorcycle.
No changes to the wiring are necessary, just plug and play.
All necessary mountings are included in the delivery.
The licence plate angle is approx. 40 degrees. The reflector kit is included
If you need a reinforced noble number plate, look HERE
An easy to understand illustrated manual is available here: INSTALLATION

362,70 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter / Panigale V4 / V2 number plate holder from 2020 by EVOTECHPARTS

Ducati Streetfighter / Panigale V4 / V2 number plate holder from 2020 -2024 by EVOTECHPARTS

EVOTECHPARTS has co-developed a shorter number plate holder and had it made exclusively for us in this design.
Fits all Ducati Streetfighter and Panigale models with the V2 or V4 engine (from 2020).
MADE IN GERMANY
You can find a YOUTUBE video HERE
Material: Black matt anodised aluminium incl. E-approved number plate light and reflector.
Included are 2 brackets for the standard turn signals* which can still be used. The licence plate is also included in the delivery.
The angle plate, which is locked into the motorbike mount, is made of steel (black powder-coated).
The angle is adjustable and has the required 30° as shown.
The distance between the turn signals and the end of the tyre also meets the legal requirements of 30 cm.
Thus "ALL SAFE".
If you still need an additional licence plate, we can recommend this one: LICENCE PLATE PLATE
Visually a very nice solution
* Indicators are not included in the scope of delivery
Also available with licence plate for Swiss and Lichtenstein licence plates on request

RRP 318,50 Dollar
Only 245,70 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale / Streetfighter V4 Radiator Guard Set 2018+ from Evotech Performance

This radiator guard from EVOTECH Performance fits exactly on the existing mounting points on your
Panigale V4 2018+, V4 S 2018+, V4 Speciale 2018+, V4 R 2019+, V4 S Corse 2019 +
Streetfighter V4 2020 +, V4 S 2020+
If you want to be sure if your model is included, have a look HERE
No changes are necessary when mounting the motorcycle.
INSTALLATION Panigale
INSTALLATION Streetfigher

193,70 Dollar

incl. 19% tax excl. Shipping costs

55 mm socket spanner / nut with 3/4 inch (20.0 mm) square socket

55 mm nut with 12 square - suitable for the rear wheel of the Panigale / Streetfighter V4
.. for hand-operated socket wrench inserts
.. CV steel
.. 20.0 mm (3/4") internal square
.. DIN 3123 / ISO 3316
.. Scope of delivery 1 nut
.. If your torque tool has a 1/2 inch (12.5 mm) connection, you will still need this ADAPTER.

31,20 Dollar

incl. 19% tax excl. Shipping costs

Indicator holder for indicator accessories

You don't want to use standard indicators? Then we have a kit here that is attached to the licence plate.
Adjustable in width so that you can adapt them to your licence plate.
Please note the legally prescribed minimum distance from glass to glass of 180 mm.
Diameter of the hole: 10 mm
Scope of delivery:
2 aluminium brackets (black anodised), 4 M4 screws, 4 nuts M4

26,00 Dollar

incl. 19% tax excl. Shipping costs

Ducati rear wheel axle protection protector EVOTECH PERFORMANCE

The characteristics of the rear wheel axle protection for the Ducati
Fits the following Ducatis: All models

    Protects the swing arm and the sprocket
    Injection molded nylon coil with an aluminum carrier
    Stainless steel spindle rod with roller thread
    Red anodized hub stop for the outlet side
    Easy installation due to the rear wheel axle
    Spare coil heads can be purchased separately
INSTALLATION

83,20 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale V4 Fuel Tank Cover from 2021 by Evotech Performance

Ducati Panigale V4 Fuel Tank Cover 2021 - 2024 by Evotech Performance

This fuel tank - pillion footrest hole cover from EVOTECH Performance fits exactly to the existing mounting points on the following MODELS
No changes are necessary when mounting the motorcycle. This tank cover can be fitted with or without the standard pillion pegs.
The hexagonal hole pattern is designed to optimise airflow with maximum protection from road debris. CNC manufactured from aircraft aluminum. Powder coated in black for durability. All necessary screws & assembly parts are included. Assembly time approx. 10 min.

83,20 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale V4 / V2 Action Cam mounting plate

Features of the EP Action Cam camera mount for the Panigale V4 / V2 series
Suitable for the following MODELS

    With 2 screws from the road to the race track.
    Aluminium base mount with precise camera mounting point
    Black powder coating for protection
    Horizontal pivot point for easy adjustment
    Attaches to the mounting position for the licence plate holder
    No modification to the motorbike required
    Easy to understand video images are available for download: INSTALLATION

This mount is compatible with all action camera devices that use the universal action camera mounting system.

All intellectual property rights belong to Drury Precision Engineering Limited. Any infringement will be vigorously prosecuted. The Evotech Performance® brand name and the EP® logo are both registered trademarks of Drury Precision Engineering Ltd.

94,90 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale V4 Crash Protector from 2019 by Evotech Performance

Evotech Performance has designed and manufactured a unique crash guard for the main frame of the Ducati Panigale V4 range.
We designed the exit of the bracket through the gill-like side panels of the Panigale fairing plate.
The result is a crash protector kit with no drilling and no modifications to the bike.
This crash protector is easy to fit.
This protector simply attaches to the existing mounting points on your 2019 Ducati V4 (all models).
The mounting rods and brackets are CNC machined from aircraft grade aluminium.
They are powder coated black for durability.
The crash bar heads are made from a high performance engineering polymer.
All necessary fasteners are supplied with the kit.
Easy to follow illustrated instructions are available for download: INSTALLATION
We supply individual replacement crash protection parts if required.

388,70 Dollar

incl. 19% tax excl. Shipping costs

DUCATI Sequential LED indicators from Evotech Performance (1 pair)

Evotech Performance offers state-of-the-art aftermarket indicators that improve the aesthetics and safety of your motorbike.
Suitable for the following DUCATI s
These precision-engineered indicators feature a robust aluminium housing that ensures durability and a sleek look. Their sequential flashing technology enhances visibility and style, providing an eye-catching and attention-grabbing signal.
Whether you're upgrading your bike to improve signalling or you're looking for a modern, minimalist design, Evotech Performance indicators are just the thing for your motorbike. Enhance your riding experience with these high-quality indicators that seamlessly combine form and function while meeting the highest quality and performance standards in the world of motorbike accessories.

    Aluminium housing
    Black anodised for durability
    400mm cable length with plugs / Plug&Play
    With ECE test mark

128,70 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale / Streetfighter V4 Alu nuts for chainring carrier - 6 pieces - BLACK

Aluminium nut M10 x 1.00 for chainring carrier - 6 pieces - BLACK

Aluminium nut M10x1.00 for chainring carrier for Ducati Panigale / Streetfighter V4 etc.
The price is for 6 pieces. This is how many are needed for the chainring carrier
Tightening torque 35 Nm with threadlocker

39,00 Dollar

incl. 19% tax excl. Shipping costs

Ducati front wheel axle protection protector from Evotech Performance

Optimal protection for the fork in case of a slight fall or tipping over of the bike.
Good protection for expensive motorcycle parts. Mounting on the front wheel axle. 8mm rod with M8 thread.
Assembly time approx. 10min. per axle
Weight: 220 grams per axle
Fitting.....
INSTALLATION

62,40 Dollar

incl. 19% tax excl. Shipping costs

Handlebar end weights aluminium universal in red by Evotech Italy

Handlebar end weights milled from special aluminium. They have an innovative design down to the last detail. The mounting point corresponds to that of the original. For this reason, fitting is very easy and quick. The screws are made of light but high-strength duraluminium and anodised in the same colour as the bar end weights.
Including several adapters and bushings to be able to use an inner diameter of 12.5 to 16.5 mm.

39,00 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale / Streetfighter V4 Alu nuts for chainring carrier - 6 pieces - RED

Aluminium nut M10 x 1.00 for chainring carrier - 6 pieces - RED

39,00 Dollar

incl. 19% tax excl. Shipping costs

Ducati M25x1.25 nut for front wheel axle RED by Evotech Italy

Ducati M 25 x 1.25 nut for front wheel axle in RED by Evotech Italy
Width across flats 30 mm
Material: AL 7075 T6
Normal tightening torque.

35,10 Dollar

incl. 19% tax excl. Shipping costs

Ducati M25x1.25 nut for front wheel axle Black by Evotech Italy

Ducati M25x1.25 nut for front wheel axle RED by Evotech Italy - Kopie

Ducati M 25 x 1.25 nut for front wheel axle in BLACK by Evotech Italy
Width across flats 30 mm
Material: AL 7075 T6
Normal tightening torque.

35,10 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale - XDiavel - Monster handlebar end weights from Evotech Performance

Features of the Evotech Performance handlebar end weights (Touring) for various Ducati Panigale - XDiavel - Monster models.
Suitable for the following MODELS

    Direct replacement for original left and right handlebar weights
    CNC-machined from stainless steel, including all necessary fastening elements
    Unique EP mounting design for easy but very secure installation
    EP's Touring Option, the higher handlebar end weight offered by Evotech Performance
    Additional weight supports the reduction of high-frequency vibrations
    Discreet, elegant design with EP logos and aesthetics

RRP 102,70 Dollar
Only 76,70 Dollar

incl. 19% tax excl. Shipping costs

Automatic torque wrench 1/2 inch 60-330 Nm incl. case

Perfect for tightening the rear wheel with the correct torque with ease.
The long lever makes light work of it.
Switchable for left and right-hand operation. GS tested. The adapter 4000824474 is required to use the sockets also offered here (60, 55 and 41 mm).
With calibration certificate

    Square drive: 1/2 inch
    Torque adjustable: 70 to 330 Nm
    incl. case
    Weight: 1.9 kg
    Length: 563 mm

RRP 128,70 Dollar
Only 102,70 Dollar

incl. 19% tax excl. Shipping costs

Ducati / Aprilia brake calliper spacer titanium 4 pieces from Evotech Performance

Evotech Performance has manufactured titanium brake caliper spacers to allow the removal of Ducati brake caliper reflectors (82718851AA and 82718841AA)
Suitable for the following MODELS
CNC machined from aerospace grade titanium. 3.5 grams of titanium per piece.
No modifications to your motorbike are required.
Simply unscrew, remove, replace and ride.
Easy to understand, illustrated instructions are available for download: INSTALLATION

All intellectual property rights are owned by Drury Precision Engineering Limited. Any infringement will be vigorously pursued. The Evotech Performance® brand name and the EP® logo are both registered trademarks of Drury Precision Engineering Ltd.

59,80 Dollar

incl. 19% tax excl. Shipping costs

Reinforced number plate made of DIBOND® material 180 x 200 mm

Reinforced number plate (D) 180 x 200 mm made of DIBOND® material

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm

The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.

The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT

16,90 Dollar

incl. 19% tax excl. Shipping costs

Rear axle nut black duralumin for Ducati Streetfighter V4 by Evotech Italy

Ducati Streetfighter V4 / Triumph Rear axle nut black duralumin by Evotech Italy

Very high quality duraluminium nut (7075T6) for the rear wheel of the Ducati Streetfighter V4 from 2020.
Machined on CNC-controlled machines, a great design and a refined look can be realised.
The 6 bulges and the 6 frontal holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The mounting is done with a standard ring spanner or nut.
Supplied with: 1 x rear axle nut with 55 mm spanner size.

61,10 Dollar

incl. 19% tax excl. Shipping costs

Rear axle nut M48x1.5 RED Duraluminium Evotech Italien

Very high quality duraluminium nut (7075T6) for the rear wheel
Machined on CNC-controlled machines, a great design and a refined look can be realised.
The 6 bulges and the 6 frontal holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The mounting is done with a standard ring spanner or nut.
Supplied with: 1 x rear axle nut with 55 mm spanner size.

61,10 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale - Monster - XDiavel Brake and Clutch Lever Protectors by Evotech Performance

Evotech Performance has produced a brake and clutch lever guard kit for the Panigale V4, various Monster and XDiavel motorbikes.
To see which motorbike these guards will fit, click here under MODELS.
The lever guard is held in place by a unique machined cartridge expansion system.
CNC machined from aircraft grade aluminium and stainless steel.
No modifications are required to your motorbike.
The black powder coat finish ensures durability.
All fixings are supplied with the kit.

253,50 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale - Monster - XDiavel Brake and Clutch Lever Protectors (RACE) by Evotech Performance

253,50 Dollar

incl. 19% tax excl. Shipping costs

Front brake caliper bolt set (Race) from Evotech Performance

Front brake caliper bolt set (Race) from Evotech Performance
Shank length : 55 mm
Suitable for the following MODELS

- Manufactured in-house by Evotech Performance
- Stainless steel brake calliper bolts with hexagon head: direct replacement for the original bolts
- EP's model specific design replicates bolt length, thread and thread pitch for a secure fit
- 316 austenitic stainless steel (marine grade) for exceptional corrosion resistance
- Pre-drilled hex head for safety wire (lockwire)
- 12mm hex head
- Flanged bolt head provides secure bearing surface
- Evotech front brake caliper bolt kit includes all required bolts for direct replacement of OE parts
- Independently tested to ISO 3506 by a UKAS ISO 17025 accredited test centre

74,10 Dollar

incl. 19% tax excl. Shipping costs

Front brake caliper bolt set (Street) from Evotech Performance

Front brake caliper bolt set (Street) from Evotech Performance
Shank length : 55 mm
Suitable for the following MODELS

- Manufactured in-house by Evotech Performance
- Stainless steel caliper bolts with round head: direct replacement for original bolts
- EP's model specific design replicates bolt length, thread and pitch for a secure fit
- 316 austenitic stainless steel (marine grade) for exceptional corrosion resistance
- Rolled threads for increased durability
- 8mm Allen key head
- The Evotech front brake caliper bolt set provides a complete set of bolts for your motorbike
- Independently tested to ISO 3506 by a UKAS ISO 17025 accredited test centre

63,70 Dollar

incl. 19% tax excl. Shipping costs

KTM 1290 / Ducati Streetfighter / Panigale hook spanner galvanised steel chain tensioner

steel Hook spanner galvanised chain tensioner

Tired of getting out the tool kit and putting the tools together every time you want to tighten your chain?
Then this is the right tool for you. Made of 4 mm galvanised steel with a hole for hanging on the tool wall.
Total length 40 cm
With EVOTECHPARTS engraving - Made in Germany

RRP 28,60 Dollar
Only 22,75 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale Garmin Compatible Navi Holder from Evotech Performance

Features of the Evotech Performance Garmin compatible nav mount for the Ducati Panigale. Check here if your MODEL is included.

    Black powder coated aluminium mount with precise Garmin mounting point.
    Adjustable horizontal pivot point for good visibility
    Attaches to the ignition lock cover
    No modification to the motorbike required
    Installation instructions can be found here: INSTALLATION

76,70 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale Quad Lock compatible sat nav holder from Evotech Performance

Features of the EP Quad Lock compatible sat nav mount for the Ducati Panigale.
If you would like to know whether the holder fits your Ducati Panigale, take a look here: MODELS

    Centrally positions a smartphone in front of the rider
    Attaches via the ignition lock cover
    Quad Lock attachment point already integrated in the EP holder
    Compatible with all Quad Lock motorbike mounts and Quad Lock motorbike accessories
    All other mounts are included in the kit
    Adjustable horizontal pivot point for easy visibility

What is a motorbike phone mount?
To access your smartphone while riding for applications such as audio and GPS, Evotech Performance has developed the Quad Lock compatible sat nav mount.   Made from lightweight aluminium and reinforced with EP's signature black powder coating, the mount can be attached to the ignition lock cover using the online step-by-step instructions: INSTALLATION
If the Quad Lock holder is already fitted, the driver can secure their smartphone in their chosen Quad Lock smartphone case.

96,20 Dollar

incl. 19% tax excl. Shipping costs

Hook spanner Chain tensioner Single-arm swingarm made of STAINLESS STEEL

STAINLESS STEEL Hook spanner Chain tensioner Single-arm swingarm

Tired of getting out the tool kit and putting the tools together every time you want to tighten your chain?
Then this is the right tool for you. Made of 4 mm STAINLESS STEEL with a hole for hanging on the tool wall.
Total length 40 cm
With EVOTECHPARTS engraving - Made in Germany

32,50 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale Action / Dash Cam Mount from Evotech Performance

Ducati Panigale Action / Dash Cam mount from Evotech Performance
Suitable for the following MODELS

    Black powder-coated aluminium bracket specially designed for compatibility with action and dash cams
    Adjustable horizontal pivot point for easy viewing
    Attaches to the ignition lock cover
    No modification to the motorbike required

76,70 Dollar

incl. 19% tax excl. Shipping costs

Chain lubricant helper from Evotech Performance

Chain lubricant helper RED from Evotech Performance

Chain Lube Helper from Evotech Performance
Watch the video first. Then you'll see exactly what a great accessory it is: INSTALLATION

The Evotech Performance Chain Lube Applicator is easy to use
Flexible and strong rubber polyurethane ensures easy fitting
Internal paddle nozzles ensure the lubricant hits the motorbike chain in the preferred position
Clear silicone tube allows you to match the applicator outlet to your chosen lubricant
Stainless steel clip holds the silicone tube securely in place
Designed and manufactured by Evotech Performance in the UK

20,80 Dollar

incl. 19% tax excl. Shipping costs

USB A charger from Evotech Performance

The Evotech Performance Motorcycle USB Charger is a device that supplies power to electronic devices via a USB interface.
This article is equipped with USB A connection. With USB C connection you can find HERE
Extended range: The 2.2 metre long cable offers a long range so that you can conveniently install and mount the USB charger in different places on your motorbike. This flexibility ensures that the charger can be optimally positioned to be accessible while riding or parking.
Direct connection to the battery or ignition switch: Direct connection to the motorbike battery or ignition switch ensures a stable and reliable power source for the USB charger. However, we recommend connecting a fuse element in between. This direct wiring allows the charger to draw power directly from the motorbike's electrical system, ensuring a consistent and reliable power supply for chargers.
You can find an installation video HERE

41,60 Dollar

incl. 19% tax excl. Shipping costs

Stainless steel screw and nut set for licence plate

The set (12 parts) consists of:
2 x M6x16 countersunk screw
2 x M5x10 countersunk screw
2 x M5x12 pan-head screw
2 x M6 hexagon nut
4 x M5 hexagon nut
This gives you a complete screw/nut set if you use our IDENTIFICATION PLATE and the REFLECTOR KIT.

3,90 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale SP Connect compatible sat nav holder from Evotech Performance

Ducati Panigale V4 SP Connect compatible sat nav holder from Evotech Performance
Suitable following MODELS

    Centrally positions a smartphone in front of the rider
    Attached via the ignition lock cover
    SP Connect attachment point already integrated into the EP mount
    All other fixings are included in the kit
    Adjustable horizontal pivot point for good visibility
    Installation help can be found here: INSTALLATION

76,70 Dollar

incl. 19% tax excl. Shipping costs

Bremsbelag Brembo SA Sinter 07BB37SA - Front Site

Design: Brake lining (disc brake)
Brake lining: Sintered metal road
width: 102,2 mm
height: 42 mm
thickness: 7,7 mm
Suitable for the following motorcycles:
VEHICLE LIST
If you want to install cheaper, but equally good, biting pads, take a look here: GALFER

RRP 76,70 Dollar
Only 59,80 Dollar

incl. 19% tax excl. Shipping costs

Brake lining Brembo Sinter 07BB2065 - rear wheel

original equipment flooring
Type 50, sintered metal
Design: Brake lining (disc brake)
Brake pad: Sintered metal OEM
width: 50,8 mm
height: 53,7 mm
thickness: 7,4 mm
With ABE
Suitable for the following motorcycles:
FAHRZEUGLISTE

RRP 52,00 Dollar
Only 39,00 Dollar

incl. 19% tax excl. Shipping costs

License plate and reflector mounting kit

Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts

15,60 Dollar

incl. 19% tax excl. Shipping costs

EVOTECH LED license plate light with 4 mm threaded bolt and 11 mm length

EVOTECH LED license plate light with 4 mm threaded bolt and 11 mm length
Cable length 30 cm

20,80 Dollar

incl. 19% tax excl. Shipping costs

Adapter for Ducati turn signals from Evotech Italy

These indicator brackets are made from laser-cut aluminium and feature a black surface finish.
They are designed so that the standard indicators on your Ducati motorcycle can be reused.
The kit includes two brackets that attach directly to the Evotech licence plate holder (or our licence plate plate) and two special spacers to insert into the original rubber turn signal bracket.
This kit is compatible with Ducati Performance turn signals and generally with Ducati teardrop-shaped turn signals.
The price shown is for the pair.

33,80 Dollar

incl. 19% tax excl. Shipping costs

Spare spindle head for Evotech Performance axle protectors

Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.
Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm

13,00 Dollar

incl. 19% tax excl. Shipping costs

1 to 41 (from a total of 41)

Panigale 2018 - 2024