MAIN PAGE » DUCATI » Streetfighter V2 » Streetfighter V2 until 2024

Streetfighter V2 until 2024

Accessories for the Streetfighter V2 until 2024

Ducati Panigale V4 , R, S, S Corse from 2018, Streetfighter V2 from 2022 license plate holder from Evotech Performance

Ducati Panigale V4 , V2 from 2018, Streetfighter V2 from 2022 license plate holder from Evotech Performance

This license plate holder from EVOTECH PERFORMANCE for your DUCATI PANIGALE from 2018 and Streetfighter V2 from 2022 is CNC machined from lightweight aircraft aluminum.
Finished with a tough satin black powder coat.
Suitable for the following MODELS
The original turn signals can still be used.
The LED number plate lighting is included in the scope of delivery.
This license plate holder was developed especially for the existing holders on your DUCATI Panigale / Streefighter and does not require any changes on your motorcycle.
No changes to the wiring are necessary, just plug and play.
All necessary mountings are included in the delivery.
The licence plate angle is approx. 40 degrees. The reflector kit is included
If you need a reinforced noble number plate, look HERE
An easy to understand illustrated manual is available here: INSTALLATION

348,75 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V2 Radiator Protection Set 2022+ Evotech Performance

Ducati Streetfighter V2 Radiator Protection Set 2022-2024 Evotech Performance

Only fits the Ducati Streetfighter V2 2022-2024
Thanks to Evotech's ingenious design, the upper radiator guard can be mounted without removing the fairings.
The elegantly designed matrix features hexagonal holes to optimize airflow while providing maximum protection from road debris.
The radiator protection kit for the Ducati Streetfighter V2 from 2022 features a remarkable strength-to-weight ratio, weighing in at under 350 grams complete.
CNC machined from aircraft grade aluminum and stainless steel.
No modifications are required to your Ducati V2 Streetfigher.
The black powder coat finish ensures durability.
All mounting hardware is included with the kit.
You can view easy to follow, illustrated instructions here: INSTALLATION

183,75 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V4 from 2020 licence plate holder by Evotech Italy

Ducati Streetfighter V4 / V4S from 2020 licence plate holder by Evotech Italy

Ducati Streetfighter V4 / V4S number plate holder from Evotech Italy.

The Evotech ITALY licence plate holders comply with the legal requirements, are adjustable in angle, extremely light, durable and with a revolutionary
revolutionary design.
The licence plate and all other aluminium parts are black anodised.
Solid support made of the special technopolymer material with anti-tuning system to reduce the continuous vibrations during driving.
Each KIT has special aluminium brackets depending on the model. Patented product.
The licence plate angle is 30 degrees.
Our kit here includes the complete number plate holder, LED number plate light and cable cover. An ABE is also included.
INSTALLATION
The reflector set is not included, but you can order it HERE if you need it.
We also offer a perfectly fitting number plate (also to improve the look) HERE.
The standard turn signals do not fit. Accessory turn signals with 8 mm connection must be used.

356,25 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter / Panigale V4 / V2 number plate holder from 2020 by EVOTECHPARTS

Ducati Streetfighter / Panigale V4 / V2 number plate holder from 2020 -2024 by EVOTECHPARTS

EVOTECHPARTS has co-developed a shorter number plate holder and had it made exclusively for us in this design.
Fits all Ducati Streetfighter and Panigale models with the V2 or V4 engine (from 2020).
MADE IN GERMANY
You can find a YOUTUBE video HERE
Material: Black matt anodised aluminium incl. E-approved number plate light and reflector.
Included are 2 brackets for the standard turn signals* which can still be used. The licence plate is also included in the delivery.
The angle plate, which is locked into the motorbike mount, is made of steel (black powder-coated).
The angle is adjustable and has the required 30° as shown.
The distance between the turn signals and the end of the tyre also meets the legal requirements of 30 cm.
Thus "ALL SAFE".
If you still need an additional licence plate, we can recommend this one: LICENCE PLATE PLATE
Visually a very nice solution
* Indicators are not included in the scope of delivery
Also available with licence plate for Swiss and Lichtenstein licence plates on request

RRP 306,25 Dollar
Only 236,25 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V2 Radiator Guard Top 2022+ Evotech Performance

Thanks to Evotech's ingenious design, the upper radiator guard can be fitted without having to remove the fairings.
The elegantly designed matrix features hexagonal holes to optimise airflow while providing maximum protection from road debris.
CNC machined from aircraft grade aluminium and stainless steel.
No modifications are required to your Ducati V2 Streetfigher.
The black powder coating ensures durability.
All mounting hardware is supplied with the kit.
Easy to follow illustrated instructions can be found here: INSTALLATION

110,00 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V2 Radiator Guard Lower 2022+ Evotech Performance

The elegantly designed matrix features hexagonal holes to optimise airflow while providing maximum protection from road debris.
CNC machined from aircraft grade aluminium and stainless steel.
No modifications are required to your Ducati V2 Streetfigher.
The black powder coating ensures durability.
All mounting hardware is supplied with the kit.
Easy to follow illustrated instructions can be found here: INSTALLATION

86,25 Dollar

incl. 19% tax excl. Shipping costs

Ducati rear carrier - paddock stand mount from Evotech Performance

Features of Evotech Performance Paddock rear carrier - paddock stand mount for the Ducati
Suitable for the following MODELS

Hourglass shaped coils made from black injection moulded nylon
Inner stainless steel bushing moulded into the nylon for additional reinforcement
CNC-machined spacers made from anodised aluminium for a precise fit on your Monster
Attaches to the existing mounting points on the swingarm
Suitable for C- and V-Cup paddock stands
No modifications to your motorbike required
INSTALLATION

46,25 Dollar

incl. 19% tax excl. Shipping costs

Indicator holder for indicator accessories

You don't want to use standard indicators? Then we have a kit here that is attached to the licence plate.
Adjustable in width so that you can adapt them to your licence plate.
Please note the legally prescribed minimum distance from glass to glass of 180 mm.
Diameter of the hole: 10 mm
Scope of delivery:
2 aluminium brackets (black anodised), 4 M4 screws, 4 nuts M4

25,00 Dollar

incl. 19% tax excl. Shipping costs

Ducati rear wheel axle protection protector EVOTECH PERFORMANCE

The characteristics of the rear wheel axle protection for the Ducati
Fits the following Ducatis: All models

    Protects the swing arm and the sprocket
    Injection molded nylon coil with an aluminum carrier
    Stainless steel spindle rod with roller thread
    Red anodized hub stop for the outlet side
    Easy installation due to the rear wheel axle
    Spare coil heads can be purchased separately
INSTALLATION

80,00 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V2 passenger rest cover plate 2022+ from Evotech Performance

The Evotech Performance pillion footrest removal plate attaches to your motorcycle at the existing mounting points.
Simply remove the pillion footpegs and install this pillion plate as a cover for a clean racing look.
No modifications to your motorcycle are required.
CNC machined from aircraft grade aluminum.
Powder coated black for durability.
All necessary fasteners are included with the kit.
Easy to follow, illustrated instructions are available for download: INSTALLATION

90,00 Dollar

incl. 19% tax excl. Shipping costs

Ducati Monster Hypermotard Rear Wheel Axle Protector from 2021 by Evotech Performance

Ducati Monster Rear Wheel Axle Protector from 2021 by Evotech Performance

The most important features of the rear wheel axle protector for the Monster, Hypermotard 698, Panigale V2, Streetfighter V2
You can find an overview of which motorbike this protector fits here: MODEL
    Aluminium spacer with nylon crash cap
    Stainless steel spindle rod fits through the rear wheel axle
    Protects the swingarm and sprocket carrier.
    Manufactured to the highest standards by Evotech Performance
    Replacement heads can be purchased separately in case you have a crash.

60,00 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V2 / V4 SP Connect kompatible Navi Halterung Evotech Performance - 56mm

Features of the Evotech Performance SP Connect compatible sat nav mount for the Ducati Streetfighter V4 and V2 from 2020 onwards.
The distance between the M8 screws is 56 mm centre to centre.

    Places a smartphone centrally in front of the rider
    Attaches via the handlebar clamp
    SP Connect mounting point already integrated in the EP mount
    All other mounting parts are included in the kit
    Adjustable horizontal pivot point for good visibility

What is a motorbike phone mount?

To access your smartphone while riding for applications such as audio and GPS, Evotech Performance has developed the SP Connect compatible navi mount. Made from lightweight aluminium and reinforced with EP's signature black powder coating, the mount can be attached to the handlebar clamp using the online step-by-step instructions.   With the SP Connect mounting point already attached, the rider can secure their smartphone in their chosen SP Connect smartphone case.
INSTALLATION

73,75 Dollar

incl. 19% tax excl. Shipping costs

Ducati front axle protector from Evotech Performance

Ducati front axle protector from Evotech Performance
Suitable for the following MODELS
Features of the Evotech front wheel spools for Ducati

Designed and built to fit your Ducati exactly
Injection moulded nylon spool heads that sit on both sides of the front wheel
Supported by an aluminium inner
Fixed through the spindle by a stainless steel threaded rod
Replacement spool heads are available

60,00 Dollar

incl. 19% tax excl. Shipping costs

Ducati front wheel axle protection protector from Evotech Performance

Optimal protection for the fork in case of a slight fall or tipping over of the bike.
Good protection for expensive motorcycle parts. Mounting on the front wheel axle. 8mm rod with M8 thread.
Assembly time approx. 10min. per axle
Weight: 220 grams per axle
Fitting.....
INSTALLATION

60,00 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V2/V4 TomTom compatible handlebar clamp Navi mount from 2021 - 56mm

Features of the EP TomTom-compatible sat nav mount for the Ducati Streetfighter V2/V4
The distance between the M8 screws is 56 mm centre to centre.

    CNC machined aluminium mount to securely attach the TomTom system to the motorbike
    Attaches directly to the centre handlebar clamp with no modifications required
    Horizontal pivot point with easy to tighten thumbscrews
    Kit comes with all necessary mounting hardware
    Easy to install with our online step-by-step instructions found here INSTALLATION

73,75 Dollar

incl. 19% tax excl. Shipping costs

Handlebar end weights aluminium universal in red by Evotech Italy

Handlebar end weights milled from special aluminium. They have an innovative design down to the last detail. The mounting point corresponds to that of the original. For this reason, fitting is very easy and quick. The screws are made of light but high-strength duraluminium and anodised in the same colour as the bar end weights.
Including several adapters and bushings to be able to use an inner diameter of 12.5 to 16.5 mm.

37,50 Dollar

incl. 19% tax excl. Shipping costs

Handlebar end mirrors from Evotech Performance

Main features of the Evotech handlebar end mirrors:
Suitable for the following MODELS
You can find an installation video here: INSTALLATION

    Modernised design of the classic ‘round’ handlebar end mirror
    The mirror can be swivelled backwards for optimum visibility
    Convex shape of the mirror glass for 2x magnification
    Aluminium mirror shaft is adjustable in position
    Internal collet mounting mechanism is model-specific, not universally applicable
    High-quality, injection-moulded nylon mirror housing with Evotech performance logos
Scope of delivery: 1 pair
    Glass diameter: 85 mm with an area of 56.72 cm² (not permitted in many countries)

RRP 356,25 Dollar
Only 248,75 Dollar

incl. 19% tax excl. Shipping costs

KTM, Ducati, Husqvarna Brake and Clutch Lever Protector Kit from Evotech Performance

Evotech Performance has produced a brake and clutch lever protection kit for KTM, Ducati, Husqvarna... Husqvarna. Please check here if your bike is included: All MODELS.
The protectors are held in place with our unique machined cartridge expansion system.
CNC machined from aircraft grade aluminium and stainless steel.
No modifications are required to your bike.
Finished with a durable black powder coat for durability.
All fixings are supplied with the kit.

243,75 Dollar

incl. 19% tax excl. Shipping costs

KTM, Ducati, Husqvarna handlebar end weights ROAD from Evotech Performance

Features of the Evotech Performance handlebar end weights (ROAD) for various Ducati , KTM, Husqvarna Models.
Suitable for the following MODELS

    Direct replacement for original left and right handlebar weights
    CNC-machined from stainless steel, including all necessary fastening elements
    Unique EP mounting design for a simple but very secure installation
    EP's Touring Option, the higher handlebar end weight offered by Evotech Performance
    Additional weight supports the reduction of high-frequency vibrations
    Discreet, elegant design with EP logos and aesthetics

108,75 Dollar

incl. 19% tax excl. Shipping costs

Automatic torque wrench 1/2 inch 60-330 Nm incl. case

Perfect for tightening the rear wheel with the correct torque with ease.
The long lever makes light work of it.
Switchable for left and right-hand operation. GS tested. The adapter 4000824474 is required to use the sockets also offered here (60, 55 and 41 mm).
With calibration certificate

    Square drive: 1/2 inch
    Torque adjustable: 70 to 330 Nm
    incl. case
    Weight: 1.9 kg
    Length: 563 mm

RRP 123,75 Dollar
Only 98,75 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V4 Holder for Garmin Navigation by Evotech Performance

Ducati Streetfighter V2 / V4 Holder for Garmin Navigation by Evotech Performance - 56mm

Features of the Evotech Performance Garmin sat nav mount for the Ducati Streetfighter V2, V4 und V4 S.
The distance between the M8 screws is 56 mm centre to centre.
Here is a VIDEO about it

    Black powder coated aluminium mount with precision Garmin mounting point
    Adjustable horizontal pivot point for good visibility
    Attaches to handlebar clamp
    No modification to the motorbike required
    Installation instructions are available here: INSTALLATION

73,75 Dollar

incl. 19% tax excl. Shipping costs

Ducati / Aprilia brake calliper spacer titanium 4 pieces from Evotech Performance

Evotech Performance has manufactured titanium brake caliper spacers to allow the removal of Ducati brake caliper reflectors (82718851AA and 82718841AA)
Suitable for the following MODELS
CNC machined from aerospace grade titanium. 3.5 grams of titanium per piece.
No modifications to your motorbike are required.
Simply unscrew, remove, replace and ride.
Easy to understand, illustrated instructions are available for download: INSTALLATION

All intellectual property rights are owned by Drury Precision Engineering Limited. Any infringement will be vigorously pursued. The Evotech Performance® brand name and the EP® logo are both registered trademarks of Drury Precision Engineering Ltd.

57,50 Dollar

incl. 19% tax excl. Shipping costs

Reinforced number plate made of DIBOND® material 180 x 200 mm

Reinforced number plate (D) 180 x 200 mm made of DIBOND® material

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm

The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.

The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT

16,25 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V4 from 2021 Quad Lock compatible Navi Holder from Evotech Performance

Ducati Streetfighter V4 / V2 from 2021 Quad Lock compatible Navi Holder from Evotech Performance

Features of the Evotech Performance Quad Lock compatible nav mount
PRODUKT VIDEO

    Places your smartphone centrally in front of you
    Attaches via the handlebar clamp
    Quad Lock mounting point already integrated in the EP mount
    Compatible with all Quad Lock motorbike mounts and Quad Lock motorbike accessories
    All other mounting parts are included in the kit
    Adjustable horizontal pivot point for easy viewing
Suitable for the following MODELS

90,00 Dollar

incl. 19% tax excl. Shipping costs

KTM 1290 / Ducati Streetfighter / Panigale hook spanner galvanised steel chain tensioner

steel Hook spanner galvanised chain tensioner

Tired of getting out the tool kit and putting the tools together every time you want to tighten your chain?
Then this is the right tool for you. Made of 4 mm galvanised steel with a hole for hanging on the tool wall.
Total length 40 cm
With EVOTECHPARTS engraving - Made in Germany

RRP 27,50 Dollar
Only 21,88 Dollar

incl. 19% tax excl. Shipping costs

Hook spanner Chain tensioner Single-arm swingarm made of STAINLESS STEEL

STAINLESS STEEL Hook spanner Chain tensioner Single-arm swingarm

Tired of getting out the tool kit and putting the tools together every time you want to tighten your chain?
Then this is the right tool for you. Made of 4 mm STAINLESS STEEL with a hole for hanging on the tool wall.
Total length 40 cm
With EVOTECHPARTS engraving - Made in Germany

31,25 Dollar

incl. 19% tax excl. Shipping costs

Chain lubricant helper from Evotech Performance

Chain lubricant helper RED from Evotech Performance

Chain Lube Helper from Evotech Performance
Watch the video first. Then you'll see exactly what a great accessory it is: INSTALLATION

The Evotech Performance Chain Lube Applicator is easy to use
Flexible and strong rubber polyurethane ensures easy fitting
Internal paddle nozzles ensure the lubricant hits the motorbike chain in the preferred position
Clear silicone tube allows you to match the applicator outlet to your chosen lubricant
Stainless steel clip holds the silicone tube securely in place
Designed and manufactured by Evotech Performance in the UK

20,00 Dollar

incl. 19% tax excl. Shipping costs

USB A charger from Evotech Performance

The Evotech Performance Motorcycle USB Charger is a device that supplies power to electronic devices via a USB interface.
This article is equipped with USB A connection. With USB C connection you can find HERE
Extended range: The 2.2 metre long cable offers a long range so that you can conveniently install and mount the USB charger in different places on your motorbike. This flexibility ensures that the charger can be optimally positioned to be accessible while riding or parking.
Direct connection to the battery or ignition switch: Direct connection to the motorbike battery or ignition switch ensures a stable and reliable power source for the USB charger. However, we recommend connecting a fuse element in between. This direct wiring allows the charger to draw power directly from the motorbike's electrical system, ensuring a consistent and reliable power supply for chargers.
You can find an installation video HERE

40,00 Dollar

incl. 19% tax excl. Shipping costs

Stainless steel screw and nut set for licence plate

The set (12 parts) consists of:
2 x M6x16 countersunk screw
2 x M5x10 countersunk screw
2 x M5x12 pan-head screw
2 x M6 hexagon nut
4 x M5 hexagon nut
This gives you a complete screw/nut set if you use our IDENTIFICATION PLATE and the REFLECTOR KIT.

3,75 Dollar

incl. 19% tax excl. Shipping costs

USB C charger from Evotech Performance

The Evotech Performance Motorcycle USB Charger is a device that supplies power to electronic devices via a USB interface.
Extended range: The 2.2 metre long cable offers a long range so that you can conveniently install and mount the USB charger in different places on your motorbike. This flexibility ensures that the charger can be optimally positioned to be accessible while riding or parking.
Direct connection to the battery or ignition switch: Direct connection to the motorbike battery or ignition switch ensures a stable and reliable power source for the USB charger. However, we recommend connecting a fuse element in between. This direct wiring allows the charger to draw power directly from the motorbike's electrical system, ensuring a consistent and reliable power supply for chargers.
You can find an installation video HERE

40,00 Dollar

incl. 19% tax excl. Shipping costs

EVOTECH LED license plate light with 4 mm threaded bolt and 11 mm length

EVOTECH LED license plate light with 4 mm threaded bolt and 11 mm length
Cable length 30 cm

20,00 Dollar

incl. 19% tax excl. Shipping costs

Adapter for Ducati turn signals from Evotech Italy

These indicator brackets are made from laser-cut aluminium and feature a black surface finish.
They are designed so that the standard indicators on your Ducati motorcycle can be reused.
The kit includes two brackets that attach directly to the Evotech licence plate holder (or our licence plate plate) and two special spacers to insert into the original rubber turn signal bracket.
This kit is compatible with Ducati Performance turn signals and generally with Ducati teardrop-shaped turn signals.
The price shown is for the pair.

32,50 Dollar

incl. 19% tax excl. Shipping costs

Spare spindle head for Evotech Performance axle protectors

Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.
Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm

12,50 Dollar

incl. 19% tax excl. Shipping costs

1 to 33 (from a total of 33)

Accessories for the Streetfighter V2 until 2024

Streetfighter V2 until 2024

Features of Evotech Performance Paddock rear carrier - paddock stand mount for the Ducati Suitable for the following MODELS

Features of Evotech Performance Paddock rear carrier - paddock stand mount for the Ducati
Suitable for the following MODELS