KTM 1050-1290 Advent. 2013 +

KTM 1050/1090/1190/1290 Adventure  2013 +
Radiator guard SuperDuke GT / Adventure from Evotech Performance
The radiator guard fits exactly on the existing attachment points of your

KTM 1290 SuperDuke GT 2016 +
KTM 1050 Adventure 2015 - 2016

KTM 1090 ADVENTURE Guard 2017 - 2018
KTM 1190 Adventure R 2013 - 2016
KTM 1190 Adventure  2013 - 2016
KTM 1290 Super Adventure 2015 – 16

INSTALLATION
110,70 Dollar
incl. 19% tax excl. Shipping costs
KTM 790 / 1050 / 1090 / 1290 Adventure axle guard front axle
Features of the Evotech Performance front axle impact protector for the KTM Adventure models 790, 1050, 1090, 1290.
This front wheel axle protector fits the following
Models
        Robust nylon coil heads with aluminium core
        Mounted through the axle of the front fork
        Includes spindle rod and all necessary nuts
        Evotech Performance manufacturing using the highest quality materials
        Individual replacement spools can be purchased separately
INSTALLATION
62,10 Dollar
incl. 19% tax excl. Shipping costs
Brake lining Brembo Sinter 07BB2065 - rear wheel
original equipment flooring
Type 50, sintered metal
Design: Brake lining (disc brake)
Brake pad: Sintered metal OEM
width: 50,8 mm
height: 53,7 mm
thickness: 7,4 mm
With ABE
Suitable for the following motorcycles:
FAHRZEUGLISTE

 
54,00 Dollar
incl. 19% tax excl. Shipping costs
Clutch Release / Pressure Plate Black KTM 1290 SDR/GT LC8 Engine
Clutch Release / Pressure Plate Black KTM 1290 SDR/GT LC8 Engine
48,60 Dollar
incl. 19% tax excl. Shipping costs
Paddock stand recording by Evotech Performance
Evotech Performance's paddock stand coils are a must for motorbike maintenance.
Manufactured in Great Britain.
CNC-machined from high quality nylon.
Aluminium inside for extra strength.
All necessary fixings are supplied with the kit.

INSTALLATION
43,20 Dollar
incl. 19% tax excl. Shipping costs
Garmin Navi mount on Evotech Performance bracket system
NEW
With this interface plate you can convert your Navi mount (from Evotech Performance) to the Garmin mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate  
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Compatible with all Zumo models.
Note: The Garmin Motorcycle Navi is not included.
40,50 Dollar
incl. 19% tax excl. Shipping costs
TomTom Navi mount on Evotech Performance bracket system
NEW
With this interface plate you can convert your Navi mount (from Evotech Performance) to the TomTom mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate  
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Note: The TomTom Motorcycle Navi is not included.
40,50 Dollar
incl. 19% tax excl. Shipping costs
Oil lock screw - ORANGE - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
Oil lock screw - ORANGE - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
including sheet metal for receiving the safety wire.
The colour of the anodisation may change slightly when exposed to heat. This is not a reason for complaint, as it is unavoidable.
The rubber seal from the old lock can be reused....... YOUTUBE Video
33,75 Dollar
incl. 19% tax excl. Shipping costs
Oil lock screw - BLACK - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
Oil lock screw - BLACK - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
including sheet metal for receiving the safety wire. The rubber seal from the old lock can be reused....... YOUTUBE Video
33,75 Dollar
incl. 19% tax excl. Shipping costs
Reinforced number plate made of ALUCOBOND® material 180 x 200 mm
Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light ALUCOBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.
The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
We stuck the number plate with mirror tape with 3 strips. Optically perfect and holds.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
16,20 Dollar
incl. 19% tax excl. Shipping costs
clutch cover Formring KTM LC8 1290ccm
Formring clutch cover KTM LC8 1290ccm
Sealing ring for the original or transparent clutch cover from Evotech SRL
The sealing ring cannot be inserted, but must be pushed in piece by piece, so to speak.
Otherwise it will be too long when you put it in.

 
10,80 Dollar
incl. 19% tax excl. Shipping costs
License plate and reflector mounting kit
Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts
10,80 Dollar
incl. 19% tax excl. Shipping costs
Spare spindle head for Evotech Performance axle protectors
Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.

Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm
10,80 Dollar
incl. 19% tax excl. Shipping costs
Screw for clutch cover KTM 1290 by Evotech Italy - Black
TOP
Aluminium screws M6 for clutch cover KTM 1290 made of Ergal 7075 by Evotech Italy
For use on the original - and on the EVOTECH clutch cover you need the following quantities and dimensions:
3 x 85 mm and 2 x 25 mm (original length).
When using the EVOTECH clutch cover protector (PRO-09-01) you need the following quantities and dimensions:
1 x 25 mm, 1 x 30 mm, 2 x 85 mm, 1 x 90 mm
Tightening torques: 8 NM
from 3,11 Dollar
incl. 19% tax excl. Shipping costs
1 to 18 (from a total of 18)