KTM 1290

ACCESSORIES for your KTM 1290 R, GT, SE
Evotech nut set ORANGE (6 pcs.) M8x1,25 chainring KTM 1290 SDR / GT
Aluminium nut set M8x1.25 ( Ergal 7075 T 6 - high strength)
in ORANGE anodised for the chainring.
For the KTM 1290 SDR / GT
Tightening torque 35 Nm with threadlocker
35,40 Dollar
incl. 19% tax excl. Shipping costs
Evotech nut set BLACK (6 pcs.) M8x1,25 chainring KTM 1290 SDR / GT
Aluminium nut set M8x1.25 ( Ergal 7075 T 6 - high strength)
in BLACK anodised for the chainring.
For the KTM 1290 SDR / GT
Tightening torque 35 Nm with threadlocker
35,40 Dollar
incl. 19% tax excl. Shipping costs
Indicator adapter set for Evotech Performance number plate holder
Indicator adapter set for Evotech Performance number plate holder.
18 mm high.
Stainless steel sleeve with M10 thread
Supplied as shown
34,22 Dollar
incl. 19% tax excl. Shipping costs
Brake caliper protection for Brembo brake calipers from Evotech Performance
Evotech Performance has designed and manufactured a protection to protect your Brembo brake calipers.
These brake caliper protectors can be fitted to your motorcycle without any modifications.
CNC machined from aircraft grade aluminium.
Finished with a durable black powder coating.
All necessary fixings are supplied with the kit.
Delivered are 1 pair for 2 brake calipers
fits on thies Models 
HERE
INSTALLATION
34,22 Dollar
incl. 19% tax excl. Shipping costs
Oil lock screw - ORANGE - KTM 1290 SDR / GT / LC8 engin
Oil lock screw - ORANGE - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
including sheet metal for receiving the safety wire.
The colour of the anodisation may change slightly when exposed to heat. This is not a reason for complaint, as it is unavoidable.
The rubber seal from the old lock can be reused....... YOUTUBE Video
29,50 Dollar
incl. 19% tax excl. Shipping costs
Oil lock screw - BLACK - KTM 1290 SDR / GT / LC8 engine
Oil lock screw - BLACK - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
including sheet metal for receiving the safety wire. The rubber seal from the old lock can be reused....... YOUTUBE Video
29,50 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 / Ducati Streetfighter / Panigale hook spanner galvanised steel chain tensioner
You don't want to get out the toolbox and put together the rickety KTM tool every time you want to tighten your chain?
Then here is the right tool for you. Made of 4 mm galvanised steel with recessed grip and hole for hanging on the tool wall.
25,96 Dollar
incl. 19% tax excl. Shipping costs
Ersatz Crash Protektor Evotech
REPLACEMENT CRASH PROTECTOR  EVOTECH PERFORMANCE - 1 Pieces
60 mm x 70 mm
25,96 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 hexagon nut M20 x 1,5 for front sprocket
KTM 1290 hexagon nut M20 x 1,5 for front sprocket - wrench size 32mm - Made in DE
Assembly tip: Tightening torque: 100 Nm and secured with Loctite ® 243
Scope of delivery: 1 piece
23,60 Dollar
incl. 19% tax excl. Shipping costs
41 mm socket wrench / socket with 3/4 inch (20.0 mm) square socket Connection
41 mm socket with 12 inside edges - suitable for the rear wheel of the KTM 1290 on the left side. 
.. for hand-operated socket wrench inserts
.. CV steel
.. 20.0 mm (3/4") internal square
.. DIN 3123 / ISO 3316

 
21,24 Dollar
incl. 19% tax excl. Shipping costs
Air filter HIFLO HFA-6301 for KTM 1290 SuperDuke / R / GT / Adventure
-10%
Air filter HIFLO HFA-6301 for KTM 1290 SuperDuke / R / GT / Adventure
RRP 23,60 Dollar
Only 21,24 Dollar
incl. 19% tax excl. Shipping costs
evotech-led-plate illumination
EVOTECH LED license plate light with 4 mm thread
Cable length 30 cm
21,24 Dollar
incl. 19% tax excl. Shipping costs
Spare spindle head for Evotech Performance axle protectors
Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.
Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here is a part of it as a replacement part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.
Diameter: 60mm
Total height: 33mm
Inner diameter: 37/20 mm
Weight: 115 gram

1 piece is supplied.
Suitable for this
MODEL among others
21,24 Dollar
incl. 19% tax excl. Shipping costs
Formring clutch cover KTM LC8 1290ccm SuperDuke or GT
Formring clutch cover KTM LC8 1290ccm
Sealing ring for the original or transparent clutch cover from Evotech SRL
The sealing ring cannot be inserted, but must be pushed in piece by piece, so to speak.
Otherwise it will be too long when you put it in.

 
18,53 Dollar
incl. 19% tax excl. Shipping costs
Aluminium screws M5 x 30 for the tank cap KTM 1290 made of Ergal 7075 by Evotech Italy
Aluminium screws M5 x 30 for the tank cap KTM 1290 made of Ergal 7075 by Evotech Italy
Tightening torque: 5 NM
Also fits Ducati Multistrada 1200/1260 and Hypermotard 950
15,34 Dollar
incl. 19% tax excl. Shipping costs
BETO air pressure gauge up to 11 bar
The digital air pressure gauge is very precise, measures pressures up to a maximum of 11 bar and is suitable for Auto and Sclaverand valves.
Description:
Pressure: max. 11 bar (160 PSI)
Suitable for: SV and AV (just unscrew the SV adapter).
Digital display
Scope of delivery:
1 air pressure gauge
14,16 Dollar
incl. 19% tax excl. Shipping costs
Reinforced number plate made of DIBOND® material 180 x 140 mm
Are you looking for a stable and visually clean solution for mounting your Swiss or Lichtenstein licence plate?
We offer a 3 mm thick, 100 gram lightweight DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the licence plate.
The plate is matt black on one side and glossy black on the other.
The plate is supplied without holes.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE licence plate holders. If not, it is available
HERE.
14,16 Dollar
incl. 19% tax excl. Shipping costs
1/2 in. (12.5 mm) to 3/4 in. (20.0 mm) magnification piece
This adapter or magnification piece is required when the torque tool has a 1/2 inch (12.5 mm) square and the required nut has a 3/4 inch (20.0 mm) square.
for hand-operated socket wrench inserts

. CV steel
. 12.5 mm(1/2") to 20.0 mm(3/4") Outside square

. DIN 3123 / ISO 3316

11,80 Dollar
incl. 19% tax excl. Shipping costs
License plate and reflector mounting kit
Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts
9,44 Dollar
incl. 19% tax excl. Shipping costs
Spare spindle head for Evotech Performance axle protectors
Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.

Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm
9,44 Dollar
incl. 19% tax excl. Shipping costs
EVOTECHPARTS Alloy nut M10x1.25 for chainring carrier KTM 1290 SDR / GT
Aluminium nut set M10x1.25 (6026 T 6 - high strength)
in RED anodised for original chainring carrier or the chainring carrier shown in the other photos.
The price is for 1 nut in RED
For the KTM 1290 SDR / GT
(6 pieces are required)
Tightening torque 45 Nm
5,90 Dollar
incl. 19% tax excl. Shipping costs
Locking plate for sprocket KTM 1290
Locking plate for sprocket KTM 1290
4,13 Dollar
incl. 19% tax excl. Shipping costs
Screw set for clutch cover KTM 1290 by Evotech Italy
Aluminium screws M6 for clutch cover KTM 1290 made of Ergal 7075 by Evotech Italy
For use on the original - and on the EVOTECH clutch cover you need the following quantities and dimensions:
3 x 85 mm and 2 x 25 mm (original length).
When using the EVOTECH clutch cover protector (PRO-09-01) you need the following quantities and dimensions:
1 x 25 mm, 1 x 30 mm, 2 x 85 mm, 1 x 90 mm
Tightening torques: 8 NM
from 2,71 Dollar
incl. 19% tax excl. Shipping costs
Screw set for clutch cover KTM 1290 by Evotech Italy
Aluminium screws M6 for clutch cover KTM 1290 made of Ergal 7075 by Evotech Italy
For use on the original - and on the EVOTECH clutch cover you need the following quantities and dimensions:
3 x 85 mm and 2 x 25 mm (original length).
When using the EVOTECH clutch cover protector (PRO-09-01) you need the following quantities and dimensions:
1 x 25 mm, 1 x 30 mm, 2 x 85 mm, 1 x 90 mm
Tightening torques: 8 NM
from 2,71 Dollar
incl. 19% tax excl. Shipping costs
76 to 104 (from a total of 104)