2017-2023

KTM 390-250-125 from 2017-2023

KTM 390 Duke Radiator Guard 2017+
KTM 390 / 250 / 125 Duke Radiator Guard 2017-2023
The radiator guard fits exactly on the existing mounting points of your KTM 390 Duke from 2017 onwards.
No modifications to the motorcycle are required.
Hexagonal hole pattern to optimize airflow with maximum protection from road debris.
CNC machined from aircraft aluminum.
Black powder coated for durability.
No other screws are required.
Assembly time approx. 20 min.
INSTALLATION
89,70 Dollar
incl. 19% tax excl. Shipping costs
Licence plate holder KTM 390 Duke EVOTECH PERFORMANCE 2017 +
KTM 390 / 250 / 125 Duke Licence plate holder EVOTECH PERFORMANCE 2017 - 2023
Take a look at the slim and elegant design of this Evotech Performance license plate holder for your KTM 390 / 250 / 125 Duke and how it fits seamlessly into the sporty line of your KTM 390 Duke.
CNC machined from lightweight aircraft aluminum with a tough satin black powder coated finish.
This EVOTECH license plate holder for the KTM 390 / 250 / 125 Duke requires no modifications to your motorcycle.
All necessary mounting material is included.
This is a real eye-catcher, this is what your KTM should look like.
Suitable for:
KTM 390 Duke license plate holder from 2017,
KTM 125 Duke from 2018, KTM 250 Duke from 2017
The angle of inclination is 40° degrees
INSTALLATION
214,50 Dollar
incl. 19% tax excl. Shipping costs
KTM 390 / 250 / 125 Duke exhaust bracket from Evotech Performance
KTM 390 / 250 / 125 Duke exhaust bracket from Evotech Performance
This holder from EVOTECH PERFORMANCE fits on your KTM 125 / 250 / 390 Duke from model year 2017 on.
and when using the original exhaust system or in combination with various mufflers.
This holder is preferred when the standard foot rests for the passenger are not needed or in solo operation.
All necessary screws and parts are included.
Made of high-strength aircraft aluminum.
Black matt anodized for a long service life.
INSTALLATION 
83,20 Dollar
incl. 19% tax excl. Shipping costs
Rectifier protection for KTM 390 Duke from EVOTECH PERFORMANCE
Rectifier protection for KTM 390 / 250 / 125 Duke from EVOTECH PERFORMANCE
Rectifier protection for KTM 390 / 250 / 125 Duke from 2017
This rectifier protection fits when using: original pillion footrests or only single EVOTECH EXHAUST HOLDERS
All screws and mounting parts are supplied.
INSTALLATION
 
55,90 Dollar
incl. 19% tax excl. Shipping costs
KTM 390 - 250 - 125 Front Wheel Axle Protector by Evotech Performance
-44%
KTM 390 - 250 - 125 Front Wheel Axle Protector by Evotech Performance - 2023
KTM 390 - 250 - 125 Front Wheel Axle Protector by Evotech Performance.

    Nylon coils protect the left and right front forks and reduce the risk of wheel damage
    Coils securely fastened with EP supplied fasteners.
    Existing mounting points are retained for secure attachment
    CNC machined nylon coils for precise fit and complement Duke aesthetics
    Machined aluminium spacer inserted in spool to spindle locking side
    Easy installation with INSTALLATION s instructions

Fits the following KTM MODELS
 
What is a spindle bobbin crash protector for?
EP Front Spindle Bobbins for the KTM 125 Duke are precision manufactured nylon spools that attach to the telescopic fork ends of the motorbike to prevent damage to these exposed areas. The nylon coils are designed to absorb the force of an impact and slide (not grip) on asphalt surfaces. The use of EP front wheel spindles can also reduce the likelihood of front wheel and brake damage.
RRP 46,80 Dollar
Only 26,00 Dollar
incl. 19% tax excl. Shipping costs
KTM Sequential LED indicators from Evotech Performance
KTM Sequential LED indicators from Evotech Performance (2 Pieces)
Evotech Performance offers state-of-the-art aftermarket indicators that improve the aesthetics and safety of your motorbike.
Suitable for the following KTM s
You can find a video about this product HERE
These precision-engineered indicators feature a robust aluminium housing that ensures durability and a sleek look. Their sequential flashing technology enhances visibility and style, providing an eye-catching and attention-grabbing signal.
Whether you're upgrading your bike to improve signalling or you're looking for a modern, minimalist design, Evotech Performance indicators are just the thing for your motorbike. Enhance your riding experience with these high-quality indicators that seamlessly combine form and function while meeting the highest quality and performance standards in the world of motorbike accessories.

    Aluminium housing
    Black anodised for durability
    400mm cable length with plugs
    With ECE test mark
    Scope of delivery: 2 indicators with cable
117,00 Dollar
incl. 19% tax excl. Shipping costs
Action / security camera front wheel mudguard mount from Evotech Performance
Action / security camera front wheel mudguard mount from Evotech Performance
Features of the Evotech Performance action/security camera mount

    Horizontal pivot point for easy adjustment
    Attaches to the front mudguard bracket
    No modification to your motorbike required
    Easy to understand, illustrated instructions are available for download INSTALLATION
    Fits the following MODELS
85,80 Dollar
incl. 19% tax excl. Shipping costs
Paddock stand recording by Evotech Performance
Paddock stand recording by Evotech Performance
Evotech Performance's paddock stand coils are a must for motorbike maintenance.
Manufactured in Great Britain.
CNC-machined from high quality nylon.
Aluminium inside for extra strength.
All necessary fixings are supplied with the kit.
INSTALLATION
48,10 Dollar
incl. 19% tax excl. Shipping costs
Reinforced number plate made of DIBOND® material 180 x 200 mm
Reinforced number plate (D) 180 x 200 mm made of DIBOND® material

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm

The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.

The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT
16,90 Dollar
incl. 19% tax excl. Shipping costs
KTM - TomTom compatible navi mount by Evotech Performance - 88 mmm
KTM - TomTom compatible navi mount by Evotech Performance - 88 mmm
Features of the TomTom compatible nav mount from Evotech Performance.

    Designed to fit perfectly with the TomTom mounting system
    Places a TomTom sat nav centrally in front of the rider
    Mount attaches to the handlebar clamp
    Adjustable horizontal pivot point for good visibility
    Fully compatible with TomTom anti-theft lock. Part No. 9uge.001.06

Note: TomTom motorcycle navi not included.
How the part is mounted, you see in the INSTALLATION s instructions
76,70 Dollar
incl. 19% tax excl. Shipping costs
Chain lubricant helper from Evotech Performance
Chain lubricant helper ORNAGE from Evotech Performance
Chain Lube Helper from Evotech Performance
Watch the video first. Then you'll see exactly what a great accessory it is: INSTALLATION

The Evotech Performance Chain Lube Applicator is easy to use
Flexible and strong rubber polyurethane ensures easy fitting
Internal paddle nozzles ensure the lubricant hits the motorbike chain in the preferred position
Clear silicone tube allows you to match the applicator outlet to your chosen lubricant
Stainless steel clip holds the silicone tube securely in place
Designed and manufactured by Evotech Performance in the UK
20,80 Dollar
incl. 19% tax excl. Shipping costs
KTM Garmin Compatible Navi Holder by Evotech Performance
Garmin Compatible Navi Holder by Evotech Performance - 88 mm
Features of the Evotech Performance Garmin compatible nav mount
Hole spacing 88mm centre/centre

    Black powder coated mount with precision Garmin mounting point
    Adjustable horizontal pivot point for good visibility
    Attaches to handlebar clamp
    No modification to the motorcycle required
    Installation instructions can be found here: INSTALLATION
76,70 Dollar
incl. 19% tax excl. Shipping costs
SP Connect Navigation Mount KTM - by Evotech Performance - 88 mm
SP Connect Navigation Mount KTM - by Evotech Performance - 88 mm
Features of the Evotech Performance SP Connect compatible sat nav mount for the following MODELS
The distance between the M8 screws is 88 mm centre to centre
    Attaches directly to the centre handlebar clamp with no modifications required
    SP Connect mounting point fully integrated into the bracket
    Wing screws allow screen angle to be changed
    Bracket CNC machined from lightweight aluminium
    Black powder coated for durability
    You can find illustrated online installation instructions here under INSTALLATION
 
What do you need a motorbike phone mount for?  

The Eotech Performance SP Connect-compatible sat nav mount over the centre handlebar clamp and is in the rider's field of vision for easy navigation while riding. The SP Connect interface allows quick and easy access to your smartphone, while the two-stage locking system secures your phone to the motorbike.   The easy-to-install smartphone GPS mount comes with all the necessary mounting hardware included in the kit.  

Note: Our mount works in conjunction with the SP micro stem mount alu #53122 and the anti-vibration module #53135.
SP Connect interface plate #53122, smartphone case, connection cable and smartphone are not included.
76,70 Dollar
incl. 19% tax excl. Shipping costs
USB charger from Evotech Performance
USB A charger from Evotech Performance
The Evotech Performance Motorcycle USB Charger is a device that supplies power to electronic devices via a USB interface.
This article is equipped with USB A connection. With USB C connection you can find HERE
Extended range: The 2.2 metre long cable offers a long range so that you can conveniently install and mount the USB charger in different places on your motorbike. This flexibility ensures that the charger can be optimally positioned to be accessible while riding or parking.
Direct connection to the battery or ignition switch: Direct connection to the motorbike battery or ignition switch ensures a stable and reliable power source for the USB charger. However, we recommend connecting a fuse element in between. This direct wiring allows the charger to draw power directly from the motorbike's electrical system, ensuring a consistent and reliable power supply for chargers.
You can find an installation video HERE
41,60 Dollar
incl. 19% tax excl. Shipping costs
License plate and reflector mounting kit
License plate and reflector mounting kit
Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts
15,60 Dollar
incl. 19% tax excl. Shipping costs
1 to 15 (from a total of 15)
KTM 390-250-125 from 2017-2023