MAIN PAGE » KTM » KTM 690 DUKE » Taillight / License plate illumination Evotech Performance - RED GLAS
.jpg "Taillight / License Plate Lighting Evotech Performance - Red GLAS")
.jpg "Preview: Taillight / License Plate Lighting Evotech Performance - Red GLAS")
Taillight / License plate illumination Evotech Performance - RED GLAS
.jpg "Taillight / License Plate Lighting Evotech Performance - Red GLAS")
Evotech Performance combination taillight / license plate light.
This LED light is a brake and license plate light in one.
The light is marked with E number plate and fully homologated.
Dimension: 108 x 50 mm. Screw spacing from centre to centre: 81mm.
This lamp may only be connected to the corresponding power lines of the motorcycle.
A direct connection to 12 Volt on-board voltage will damage the LEDs.
For testing on 5 volts:
Yellow on plus and black on minus = BRAKE
Red on plus and black on minus = Rear light with license plate illumination.
This LED light is a brake and license plate light in one.
The light is marked with E number plate and fully homologated.
Dimension: 108 x 50 mm. Screw spacing from centre to centre: 81mm.
This lamp may only be connected to the corresponding power lines of the motorcycle.
A direct connection to 12 Volt on-board voltage will damage the LEDs.
For testing on 5 volts:
Yellow on plus and black on minus = BRAKE
Red on plus and black on minus = Rear light with license plate illumination.
- Product safety :
- Manufacturer:
Evotech Performance
8 Beechings Way, Alford, Lincolnshire, LN13 9JE
+44(0) 1507 466729
sales@evotech-performance.com
Importer / first distributor:
EVOTECH GERMANY
Lothar Westphal
Eichendorffstr. 9
78239 Rielasingen
Tel.07731 8229019
mail @ evotechparts.com
General safety instructions for the product:
We recommend that you always consult a specialist workshop when installing our products or have this work carried out by a specialist. If you fit it yourself, please make sure that your motorbike is secure and that the product is only intended for your motorbike. The models for which the product is tested and intended can be found with each item.
To avoid damage to your motorbike during installation, we recommend covering all important/sensitive parts.
Please understand that we cannot accept any liability for consequential damage caused by improper installation.
When fitting, use threadlocker if possible and observe the torque specifications.
There is no ABE/parts certificate for Evotech Performance accessories. If you have any concerns, you should refrain from buying them. In some cases, bolts for fastening must be replaced with the original bolts. Legally, this could be a problem. We would like to point this out.
General torque specifications can be found HERE
Unfortunately there are no reviews yet. Be the first who rates this product.
You must be logged in to submit a review. Login
This product was added to our catalog on Saturday, July 13, 2019.