MAIN PAGE » TRIUMPH » Tiger 900 2020-2023 » Triumph Tiger 900 handlebar end weights Evotech Performance
Triumph Tiger 900 handlebar end weights Evotech Performance
Features of the Evotech Performance handlebar end weights for the Triumph Tiger 900
Suitable for the following MODELS
Left and right spare part/replacement part for Triumph's original handlebar end weights.
The two-piece weight system from EP integrates seamlessly with the original Triumph hand protectors
Stainless steel construction with black powder coating for the weights
Significant weight increase compared to Triumph's OE parts, significantly reducing handlebar vibrations
Easy installation following the illustrated online instructions from EP: INSTALLATION
Are the EP handlebar end weights for my Triumph Tiger 900 worthwhile?
In short: Yes! The EP handlebar end weights for the Triumph Tiger 900 are precision-machined from stainless steel and provide additional weight at both ends of the handlebars to significantly reduce unwanted high-frequency handlebar vibrations. The two-piece system, customised for this motorbike, allows the handlebar ends to be easily replaced while retaining the original Triumph handguard. Fitting is simple if you follow the online instructions and all the necessary parts are included in the kit.
Note: When fitting EP bar end weights and EP brake lever guard kits, the rider is responsible for ensuring that the throttle response of the motorbike (correct play, smooth opening and closing of the throttle, etc.) is not affected in any way. EP Bar End Weights and EP Brake Lever Protector Kits are for use with the OE throttle tube and handlebar grip only.
All intellectual property rights belong to Drury Precision Engineering Limited. Any infringement will be prosecuted.
Suitable for the following MODELS
Left and right spare part/replacement part for Triumph's original handlebar end weights.
The two-piece weight system from EP integrates seamlessly with the original Triumph hand protectors
Stainless steel construction with black powder coating for the weights
Significant weight increase compared to Triumph's OE parts, significantly reducing handlebar vibrations
Easy installation following the illustrated online instructions from EP: INSTALLATION
Are the EP handlebar end weights for my Triumph Tiger 900 worthwhile?
In short: Yes! The EP handlebar end weights for the Triumph Tiger 900 are precision-machined from stainless steel and provide additional weight at both ends of the handlebars to significantly reduce unwanted high-frequency handlebar vibrations. The two-piece system, customised for this motorbike, allows the handlebar ends to be easily replaced while retaining the original Triumph handguard. Fitting is simple if you follow the online instructions and all the necessary parts are included in the kit.
Note: When fitting EP bar end weights and EP brake lever guard kits, the rider is responsible for ensuring that the throttle response of the motorbike (correct play, smooth opening and closing of the throttle, etc.) is not affected in any way. EP Bar End Weights and EP Brake Lever Protector Kits are for use with the OE throttle tube and handlebar grip only.
All intellectual property rights belong to Drury Precision Engineering Limited. Any infringement will be prosecuted.
- Product safety :
- Manufacturer:
Evotech Performance
8 Beechings Way, Alford, Lincolnshire, LN13 9JE
+44(0) 1507 466729
sales@evotech-performance.com
Importer / first distributor:
EVOTECH GERMANY
Lothar Westphal
Eichendorffstr. 9
78239 Rielasingen
Tel.07731 8229019
mail @ evotechparts.com
General safety instructions for the product:
We recommend that you always consult a specialist workshop when installing our products or have this work carried out by a specialist. If you fit it yourself, please make sure that your motorbike is secure and that the product is only intended for your motorbike. The models for which the product is tested and intended can be found with each item.
To avoid damage to your motorbike during installation, we recommend covering all important/sensitive parts.
When fitting, use threadlocker if possible and observe the torque specifications.
There is no ABE/parts certificate for Evotech Performance accessories. If you have any concerns, you should refrain from buying them. In some cases, bolts for fastening must be replaced with the original bolts. Legally, this could be a problem. We would like to point this out.
General torque specifications can be found HERE
Note: When fitting Evotech handlebar end weights and Evotech brake lever protector kits, the rider is responsible for ensuring that the throttle response of the motorbike (correct play, smooth opening and closing of the throttle valve, etc.) is not affected in any way. Evotech handlebar end weights and Evotech Brake Lever Protector Kits are intended for use with the OE throttle tube and handlebar grip only.
Unfortunately there are no reviews yet. Be the first who rates this product.
You must be logged in to submit a review. Login
Customers who bought this product bought also the following products:
This product was added to our catalog on Sunday, August 18, 2024.