MAIN PAGE » YAMAHA » Yamaha FZ, MT, YZF, R1 » Yamaha YZF-R9 (2025+) licence plate holder from Evotech Performance
 Kennzeichenträger von Evotech Performance.jpg "Yamaha YZF-R9 (2025+) licence plate holder from Evotech Performance")
Yamaha YZF-R9 (2025+) licence plate holder from Evotech Performance
 Kennzeichenträger von Evotech Performance.jpg "Yamaha YZF-R9 (2025+) licence plate holder from Evotech Performance")
Does your YZF-R9 need some fresh style at the rear?
Then grab the Evotech licence plate holder! No more long tail extensions that look like you're using them to collect satellite dishes.
With the Evotech Tail Tidy, you can make the rear of your R9 crisp, short and sporty:
Tailor-made, fits like a glove - no drilling, no swearing
Ultra-light aluminium and laser-cut parts, because you don't need more weight
Your original indicators? No problem.
Including super-bright LED licence plate lighting - so people can admire your style even at night
Powder-coated, rustproof - rain, mud, what the heck!
Video instructions? There are! Just click here and get started: Watch the assembly Montagevideo
Conclusion: If you really love your R9, give it a rear end that matches the bike - slim, fast, clean. Evotech licence plate holder:
All intellectual property rights are owned by Drury Precision Engineering Limited. Any infringement will be vigorously pursued. The Evotech Performance® brand name and the EP® logo are both registered trademarks of Drury Precision Engineering Ltd.
Then grab the Evotech licence plate holder! No more long tail extensions that look like you're using them to collect satellite dishes.
With the Evotech Tail Tidy, you can make the rear of your R9 crisp, short and sporty:
Tailor-made, fits like a glove - no drilling, no swearing
Ultra-light aluminium and laser-cut parts, because you don't need more weight
Your original indicators? No problem.
Including super-bright LED licence plate lighting - so people can admire your style even at night
Powder-coated, rustproof - rain, mud, what the heck!
Video instructions? There are! Just click here and get started: Watch the assembly Montagevideo
Conclusion: If you really love your R9, give it a rear end that matches the bike - slim, fast, clean. Evotech licence plate holder:
All intellectual property rights are owned by Drury Precision Engineering Limited. Any infringement will be vigorously pursued. The Evotech Performance® brand name and the EP® logo are both registered trademarks of Drury Precision Engineering Ltd.
- Product safety/TÜV :
- Manufacturer:
Evotech Performance
8 Beechings Way, Alford, Lincolnshire, LN13 9JE
+44(0) 1507 466729
sales@evotech-performance.com
Importer / first distributor:
EVOTECH GERMANY
Lothar Westphal
Eichendorffstr. 9
78239 Rielasingen
Tel.07731 8229019
mail @ evotechparts.com
General safety instructions for the product:
We recommend that you always consult a specialist workshop when installing our products or have this work carried out by a specialist. If you fit it yourself, please make sure that your motorbike is secure and that the product is only intended for your motorbike. The models for which the product is tested and intended can be found with each item.
To avoid damage to your motorbike during installation, we recommend covering all important / sensitive parts.
The licence plate holders are designed for a size of 180 x 200 mm.
If you mount a plate under the licence plate, make sure that it does not weigh more than 150 grams. We know of cases where 3 mm solid aluminium plates weighing 300 grams have been fitted. This is too much for the bracket. OUR plate weighs 150 grams
Please understand that we cannot accept any liability for consequential damage caused by incorrect installation.
When fitting, use threadlocker if possible and observe the torque specifications. The fixing screws on the licence plate holder in particular should be secured with threadlocker. Loss of the licence plate holder due to lost screws can cause unpleasant damage.
General torque specifications can be found HERE
Licence plate holders from Great Britain do not have an ABE. The licence plate light (if one is included in the scope of delivery) has an E approval mark. The indicator spacing is 180 mm. Suitable adapters are usually included to bring the indicator spacing to the legally required 180 mm. The legally required licence plate angle of 30 degrees cannot be complied with on all British licence plate holders, as they are mounted much further in the direction of travel and may come into contact with the tyre at 30 degrees. The angle of 30 degrees must be checked and adjusted on the vehicle. Take the suspension travel of the motorbike into account. If space is tight, we recommend fitting the narrower version of the rear reflector. We have also provided further information on TÜV/ABE HERE.
Information for our Austrian customers specifically for the type approval or registration of licence plate holders can be found HERE
INSTALLATION INSTRUCTIONS:
For ecological reasons, we do not print out installation instructions or include them with the delivery.
Because of 1 x installation! We recommend (as we do the first time) to take the tablet or laptop with you to the workshop.
Unfortunately there are no reviews yet. Be the first who rates this product.
You must be logged in to submit a review. Login
This product was added to our catalog on Wednesday, July 9, 2025.