MAIN PAGE » APRILIA » RSV4 / Tuono V4

RSV4 / Tuono V4

Here you can find everything about the Aprilia RSV4 / Tuono V4

Aprilia RSV4 / Tuono V4 number plate holder from 2021 by Evotech Performance

Aprilia RSV4 / Tuono V4 2021-2024 number plate holder by Evotech Performance

Aprilia Tuono V4 and RSV4 number plate holder 2021-2024 onwards
Suitable for the following MODELS
This number plate holder from EVOTECH PERFORMANCE has a super slim and super strong design that fully integrates with the sporty lines of your Aprilia Tuono V4 and RSV4 2021-2024 onwards.
CNC-machined from lightweight aircraft-grade aluminium and finished with a robust satin black powder coating.
The original rear turn signals can still be used.
This number plate holder comes with a new LED number plate light.
This licence plate holder is designed to be fitted to your motorbike's existing brackets without the need for veining.
All fixings and are included.
You can find a matching number plate HERE
INSTALLATION guide

296,40 Dollar

incl. 19% tax excl. Shipping costs

Aprilia RSV4 / Tuono V4 from 2025 number plate holder by Evotech Performance

Aprilia RSV4 / Tuono V4 from 2025 number plate holder by Evotech Performance
Suitable for the following MODELS
This number plate holder from EVOTECH PERFORMANCE has a super slim and super strong design that fully integrates with the sporty lines of your Aprilia Tuono V4 and RSV4 2021-2024 onwards.
CNC-machined from lightweight aircraft-grade aluminium and finished with a robust satin black powder coating.
The original rear turn signals can still be used.
This license plate holder uses the original license plate lighting.
This licence plate holder is designed to be fitted to your motorbike's existing brackets without the need for veining.
All fixings and are included.
You can find a matching number plate HERE
INSTALLATION guide

297,70 Dollar

incl. 19% tax excl. Shipping costs

Aprilia RSV4 / Tuono V4 water and oil cooler protection from 2021-2024 from Evotech Performance

Aprilia RSV4 / Tuono V4 2021-2024 water and oil cooler protection from from Evotech Performance

Features of the radiator guard EP for Aprilia Tuono V4 Factory and RSV4 from year of manufacture 2021 - 2024 onwards.
Lightweight all-aluminium construction for precise fit and easy installation
Hexagonal matrix hole pattern provides strong, stable protection against road debris
EP radiator shrouds are shaped to fit snugly around the front area of the radiator
This radiator guard provides maximum airflow for essential radiator cooling
Black powder coating
All necessary mounting hardware is included
Requires no modifications to existing chassis components
Instruction INSTALLATION

RRP 180,70 Dollar
Only 144,56 Dollar

incl. 19% tax excl. Shipping costs

Aprilia RSV4 / Tuono V4 from 2025 water and oil cooler protection from Evotech Performance

Features of the radiator guard EP for Aprilia Tuono V4 Factory and RSV4 from year of manufacture from 2025 onwards. MODELS
Lightweight all-aluminium construction for precise fit and easy installation
Hexagonal matrix hole pattern provides strong, stable protection against road debris
EP radiator shrouds are shaped to fit snugly around the front area of the radiator
This radiator guard provides maximum airflow for essential radiator cooling
Black powder coating
All necessary mounting hardware is included
Requires no modifications to existing chassis components
Instruction INSTALLATION

180,70 Dollar

incl. 19% tax excl. Shipping costs

Aprilia Tuono V4 Exhaust Bracket Kit 2021+ by Evotech Performance

Aprilia Tuono V4 / RSV4 Exhaust Bracket Kit 2021+ by Evotech Performance

Evotech Performance has manufactured an exhaust hanger that is a direct replacement for the OEM pillion bracket.
No modifications to the motorbike are required.
CNC machined from aircraft grade aluminium.
Finished with a durable black powder coat for longevity.
All necessary fixings are included in the kit as well as the left side cover.
Easy to follow illustrated instructions are available for download under INSTALLATION.
Suitable for the following MODELS

113,10 Dollar

incl. 19% tax excl. Shipping costs

Aprilia Tuono V4 Factory Crash Protection Bobbins (2011+) from Evotech Performance

Evotech Performance has developed a crash protector kit for the Aprilia Tuono V4.
It is mounted directly on the frame of the motorbike.
No modifications to the motorbike are required.
The Evotech Performance crash bar heads are made from high performance engineering polymer.
The brackets are CNC machined from aircraft grade aluminium.
Powder coated black for durability.
Easy to follow illustrated instructions can be found here under INSTALLATION.
Suitable for the following MODELS from 2011
You can find the matching Crash Pad HERE

RRP 136,50 Dollar
Only 109,20 Dollar

incl. 19% tax excl. Shipping costs

Aprilia Tuono / RSV4 Axle Protector Kit from Evotech Performance

Main features of the Evotech Performance Axle Protection Kit for the Aprilia Tuono V4 1100 RR / RSV4
Suitable for the following MODELS
    Aluminium spacer with nylon coil head
    Stainless steel spindle rod fits through front fork
    Protects spindle mounts, fork drops and can prevent damage to front brake calipers
    Made from the highest quality materials by Evotech Performance
    Replacement spool heads can be purchased separately

If you need help with installation, please see here: INSTALLATION

128,70 Dollar

incl. 19% tax excl. Shipping costs

Moto Guzzi / Aprilia handlebar end weights (Touring) from Evotech Performance

Moto Guzzi / Aprilia handlebar end weights (Touring) from Evotech Performance
Weight per handlebar end weight 290 grams (scope of delivery 1 pair)
Suitable for the following MODELS

    Direct replacement for Moto Guzzi / Aprilia left and right OEM bar ends
    Heavier, longer touring design; heavier than Evotech's Road or Race options
    EP's innovative, uncomplicated mounting concept
    Customised, no modification of the motorbike or handlebar weights required
    Additional weight helps reduce high-frequency vibrations on the handlebars
    CNC-machined from stainless steel with durable black powder coating

100,10 Dollar

incl. 19% tax excl. Shipping costs

Handlebar end weights aluminium universal in red by Evotech Italy

Handlebar end weights milled from special aluminium. They have an innovative design down to the last detail. The mounting point corresponds to that of the original. For this reason, fitting is very easy and quick. The screws are made of light but high-strength duraluminium and anodised in the same colour as the bar end weights.
Including several adapters and bushings to be able to use an inner diameter of 12.5 to 16.5 mm.

RRP 39,00 Dollar
Only 31,20 Dollar

incl. 19% tax excl. Shipping costs

TomTom compatible handlebar clamp nav mount - Aprilia - Ducati - Honda 79 mm

Features of the EP TomTom compatible nav mount for the Aprilia, Honda, Ducati.
The distance between the M8 screws is 79 mm centre to centre.
Suitable on the following MODELS
    Designed to fit perfectly with the TomTom mounting system
    Places a TomTom sat nav centrally in front of the rider
    Bracket is mounted on the handlebar clamp
    Adjustable horizontal pivot point for good visibility
    Fully compatible with TomTom anti-theft lock. Part no. 9uge.001.06
    Online step-by-step installation instructions is available here: INSTALLATION

What is a motorcycle navigation device mount?
Made of lightweight aluminum and reinforced with a black powder coat finish, the nav mount simply attaches to your existing handlebar clamp.   EP's mounting plate is designed to fit snugly on the TomTom mounting system, and all other necessary parts are included in the kit. It mounts centrally near the screen for easy access to the nav and other TomTom features while riding.
Note: TomTom motorcycle navi not included

76,70 Dollar

incl. 19% tax excl. Shipping costs

Quad Lock Compatible Navi Holder from Evotech Performance 79 mm

The features of the Evotech Performance Quad Lock compatible nav mount
On which motorcycles this holder fits exactly, you can find here: MODELS
The distance between the M8 screws is 79 mm centre to centre.
    Places a smartphone centrally in front of the rider
    Is attached with the handlebar clamp
    Quad Lock mounting point already integrated in the Evotech Performance mount
    Compatible with all Quad Lock motorcycle mounts and Quad Lock motorcycle accessories
    All other mounting hardware is included in the kit
    Adjustable horizontal pivot point for easy viewing

94,90 Dollar

incl. 19% tax excl. Shipping costs

Ducati / Aprilia brake calliper spacer titanium 4 pieces from Evotech Performance

Evotech Performance has manufactured titanium brake caliper spacers to allow the removal of Ducati brake caliper reflectors (82718851AA and 82718841AA)
Suitable for the following MODELS
CNC machined from aerospace grade titanium. 3.5 grams of titanium per piece.
No modifications to your motorbike are required.
Simply unscrew, remove, replace and ride.
Easy to understand, illustrated instructions are available for download: INSTALLATION

All intellectual property rights are owned by Drury Precision Engineering Limited. Any infringement will be vigorously pursued. The Evotech Performance® brand name and the EP® logo are both registered trademarks of Drury Precision Engineering Ltd.

59,80 Dollar

incl. 19% tax excl. Shipping costs

Reinforced number plate made of DIBOND® material 180 x 200 mm

Reinforced number plate (D) 180 x 200 mm made of DIBOND® material

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm

The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.

The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT

16,90 Dollar

incl. 19% tax excl. Shipping costs

Garmin compatible navigation holder Evotech Performance 79 mm

Features of the Evotech Performance Garmin compatible nav mount for the Ducati Hypermotard 950, Aprilia 660, Aprilia V4 1100
See MODELS to see if this nav mount fits your bike
The distance between the M8 screws is 79 mm centre to centre.
Here is a VIDEO about it

    Partially CNC-milled from lightweight aluminium
    Attaches directly to the centre handlebar clamp with no modifications required
    Powder coated black for durability
    Keeps your Garmin sat nav securely in view
    Adjustable horizontal pivot point for easy visibility

What is a motorbike sat nav mount?

The EP Garmin compatible sat nav mount is placed in the rider's peripheral field of vision to help you find your way while riding.   The mount is easy to fit with the help of our instructions and attaches to the handlebar centre clamp with all standard fasteners.   The Garmin motorbike sat nav can then be mounted in your field of vision and adjusted with the thumbscrew behind the screen.
INSTALLATION

Garmin motorbike navigator not included.   Compatible with all Zumo models.

76,70 Dollar

incl. 19% tax excl. Shipping costs

Quad Lock-compatible mobile phone mount for the upper fork crown

Features of the Evotech Quad Lock-compatible navigation mount
Fits the following MODELS
Contents as shown
Positions the smartphone centrally in front of the rider
Clamp-style mounting
Quad Lock mounting point already integrated into the EP mount
Compatible with all Quad Lock motorcycle mounts and Quad Lock motorcycle accessories
All additional mounting parts included
Adjustable horizontal swivel joint for optimal visibility

96,20 Dollar

incl. 19% tax excl. Shipping costs

SP Connect compatible mobile phone mount for the upper fork crown

Features of the Evotech SP Connect-compatible navigation mount
Supplied as shown.
Compatible with the following MODELS
Positions the smartphone centrally in front of the rider
Clamp-style mounting
SP Connect mounting point already integrated into the EP mount
All other mounting parts included
Adjustable horizontal swivel joint for optimal visibility

76,70 Dollar

incl. 19% tax excl. Shipping costs

Front brake caliper bolt set (Race) from Evotech Performance

Front brake caliper bolt set (Race) from Evotech Performance
Shank length : 55 mm
Suitable for the following MODELS

- Manufactured in-house by Evotech Performance
- Stainless steel brake calliper bolts with hexagon head: direct replacement for the original bolts
- EP's model specific design replicates bolt length, thread and thread pitch for a secure fit
- 316 austenitic stainless steel (marine grade) for exceptional corrosion resistance
- Pre-drilled hex head for safety wire (lockwire)
- 12mm hex head
- Flanged bolt head provides secure bearing surface
- Evotech front brake caliper bolt kit includes all required bolts for direct replacement of OE parts
- Independently tested to ISO 3506 by a UKAS ISO 17025 accredited test centre

74,10 Dollar

incl. 19% tax excl. Shipping costs

Front brake caliper bolt set (Street) from Evotech Performance

Front brake caliper bolt set (Street) from Evotech Performance
Shank length : 55 mm
Suitable for the following MODELS

- Manufactured in-house by Evotech Performance
- Stainless steel caliper bolts with round head: direct replacement for original bolts
- EP's model specific design replicates bolt length, thread and pitch for a secure fit
- 316 austenitic stainless steel (marine grade) for exceptional corrosion resistance
- Rolled threads for increased durability
- 8mm Allen key head
- The Evotech front brake caliper bolt set provides a complete set of bolts for your motorbike
- Independently tested to ISO 3506 by a UKAS ISO 17025 accredited test centre

63,70 Dollar

incl. 19% tax excl. Shipping costs

Beeline Moto2 compatible sat nav holder from Evotech Performance - 79 mm

Beeline Moto2 compatible sat nav mount from Evotech Performance - with 79 mm centre-to-centre bolt spacing
Fits the following MODELS
Places a Beeline Moto 2 centrally in front of the rider
Attaches with the handlebar clamp
Beeline Moto 2 mounting point already integrated in the EP mount
Compatible with all Beeline Moto 2 motorbike mounts and Beeline Moto 2 motorbike accessories
All other mounting parts included in the kit
Adjustable horizontal pivot point for easy viewing

76,70 Dollar

incl. 19% tax excl. Shipping costs

SP Connect Navigation Mount by Evotech Performance

Features of the Evotech Performance SP Connect compatible sat nav mount
Suitable for the following MODELS
    Attaches directly to the centre handlebar clamp with no modifications required
    SP Connect mounting point fully integrated into the bracket
    Wing screws allow screen angle to be changed
    Bracket CNC machined from lightweight aluminium
    Black powder coated for durability
    You can find illustrated online installation instructions here under INSTALLATION

What do you need a motorbike phone mount for?

The Eotech Performance SP Connect-compatible sat nav mount mounts over the centre handlebar clamp and is in the rider's field of vision for easy navigation while riding. The SP Connect interface allows quick and easy access to your smartphone, while the two-stage locking system secures your phone to the motorbike.   The easy-to-install smartphone GPS mount comes with all the necessary mounting hardware included in the kit.

Note: Our mount works in conjunction with the SP micro stem mount alu #53122 and the anti-vibration module #53135.
SP Connect interface plate #53122, smartphone case, connection cable and smartphone are not included.

76,70 Dollar

incl. 19% tax excl. Shipping costs

USB A charger from Evotech Performance

The Evotech Performance Motorcycle USB Charger is a device that supplies power to electronic devices via a USB interface.
This article is equipped with USB A connection. With USB C connection you can find HERE
Extended range: The 2.2 metre long cable offers a long range so that you can conveniently install and mount the USB charger in different places on your motorbike. This flexibility ensures that the charger can be optimally positioned to be accessible while riding or parking.
Direct connection to the battery or ignition switch: Direct connection to the motorbike battery or ignition switch ensures a stable and reliable power source for the USB charger. However, we recommend connecting a fuse element in between. This direct wiring allows the charger to draw power directly from the motorbike's electrical system, ensuring a consistent and reliable power supply for chargers.
You can find an installation video HERE

41,60 Dollar

incl. 19% tax excl. Shipping costs

Bremsbelag Brembo SA Sinter 07BB37SA - Front Site

Design: Brake lining (disc brake)
Brake lining: Sintered metal road
width: 102,2 mm
height: 42 mm
thickness: 7,7 mm
Suitable for the following motorcycles:
VEHICLE LIST
If you want to install cheaper, but equally good, biting pads, take a look here: GALFER

76,70 Dollar

incl. 19% tax excl. Shipping costs

License plate and reflector mounting kit

Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts

15,60 Dollar

incl. 19% tax excl. Shipping costs

Crash protector replacement 60 x 70 mm- Evotech Performance

REPLACEMENT CRASH PROTECTOR EVOTECH PERFORMANCE - 1 Pieces
60 mm x 70 mm
If you would like the same product with an additional camera mount, please see HERE

29,90 Dollar

incl. 19% tax excl. Shipping costs

1 to 24 (from a total of 24)

Here you can find everything about the Aprilia RSV4 / Tuono V4