KTM 1290 R 2017-19

Here you can find noble accessories from EVOTECH PERFORMANCE for your KTM 1290 R from 2017 to 2019
Here you can find noble accessories from EVOTECH PERFORMANCE for your KTM 1290 R from 2017 to 2019
KTM 1290 hook spanner galvanised steel chain tensioner
NEW
You don't want to get out the toolbox and put together the rickety KTM tool every time you want to tighten your chain?
Then here is the right tool for you. Made of 4 mm galvanised steel with recessed grip and hole for hanging on the tool wall.
29,70 Dollar
 
incl. 19% tax excl. Shipping costs
Clutch Release / Pressure Plate Black KTM 1290 SDR/GT LC8 Engine
Clutch Release / Pressure Plate Black KTM 1290 SDR/GT LC8 Engine
48,60 Dollar
 
incl. 19% tax excl. Shipping costs
clutch cover Formring KTM LC8 1290ccm
Formring clutch cover KTM LC8 1290ccm
Sealing ring for the original or transparent clutch cover from Evotech SRL
8,10 Dollar
 
incl. 19% tax excl. Shipping costs
Screw for clutch cover KTM 1290 by Evotech Italy - ORANGE
TOP
Aluminium screws M6 for clutch cover KTM 1290 made of Ergal 7075 by Evotech Italy
For use on the original - and on the EVOTECH clutch cover you need the following quantities and dimensions:
3 x 85 mm and 2 x 25 mm (original length).
When using the EVOTECH clutch cover protector (PRO-09-01) you need the following quantities and dimensions:
1 x 25 mm, 1 x 30 mm, 2 x 85 mm, 1 x 90 mm
Tightening torques: 10 NM
from 3,11 Dollar
 
incl. 19% tax excl. Shipping costs
Screw for clutch cover KTM 1290 by Evotech Italy - Black
TOP
Aluminium screws M6 for clutch cover KTM 1290 made of Ergal 7075 by Evotech Italy
For use on the original - and on the EVOTECH clutch cover you need the following quantities and dimensions:
3 x 85 mm and 2 x 25 mm (original length).
When using the EVOTECH clutch cover protector (PRO-09-01) you need the following quantities and dimensions:
1 x 25 mm, 1 x 30 mm, 2 x 85 mm, 1 x 90 mm
Tightening torques: 10 NM
from 3,11 Dollar
 
incl. 19% tax excl. Shipping costs
KTM 1290 SDR up to 2014 License plate holder  EVOTECH PERFOMANCE
Evotech Performance designed and manufactured the first KTM Superduke License Plate Holder with CAD.W.T. (Concealed Designed Wire Technology)......
Fits only on the 1290 Super Duke R and SE
236,25 Dollar
 
incl. 19% tax excl. Shipping costs
Brake caliper protection for Brembo brake calipers from Evotech Performance - Front
Evotech Performance has designed and manufactured a protection to protect your Brembo brake calipers.
These brake caliper protectors can be fitted to your motorcycle without any modifications.
CNC machined from aircraft grade aluminium.
Finished with a durable black powder coating.
All necessary fixings are supplied with the kit.
Delivered are 1 pair for 2 brake calipers
fits on thies Models 
HERE
INSTALLATION
39,15 Dollar
 
incl. 19% tax excl. Shipping costs
Chainring carrier KTM 1290 Super Duke R / GT - EVOTECH S.R.L. - BLACK
KTM 1290 chainring carrier Super Duke R / GT
CNC made of billet aluminium in Italy. Orange or black anodized for long durability.
Optionally, the matching nut set can be used. The standard nuts also fit.
Only the original chainring carrier is replaced.
The shock absorber is not changed.
The conversion takes about 30 minutes.
Assembly & product video here:
YOUTUBE
229,50 Dollar
 
incl. 19% tax excl. Shipping costs
EP Alloy nut M10x1.25 for chainring carrier - RED
Aluminium nut set M10x1.25 (6026 T 6 - high strength)
in RED anodised for original chainring carrier or the chainring carrier shown in the other photos.
The price is for 1 nut in RED
For the KTM 1290 SDR / GT
(6 pieces are required)
Tightening torque 45 Nm
6,75 Dollar
 
incl. 19% tax excl. Shipping costs
Rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - BLACK - Left
Very high quality duraluminium nut (7075T6) for the left side of the chain wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut left side with 41 mm wrench size.
66,15 Dollar
 
incl. 19% tax excl. Shipping costs
Rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - BLACK - Right
Very high quality duraluminium nut (7075T6) for the right side of the rear wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut right side with 60 mm wrench size.
76,95 Dollar
 
incl. 19% tax excl. Shipping costs
Rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - Orange - Right
Very high quality duraluminium nut (7075T6) for the right side of the rear wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut right side with 60 mm wrench size.
76,95 Dollar
 
incl. 19% tax excl. Shipping costs
Rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - Orange - Left
Very high quality duraluminium nut (7075T6) for the left side of the rear wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut left side with 41 mm wrench size.
66,15 Dollar
 
incl. 19% tax excl. Shipping costs
Smartphone holder with USB connection GUB-E
TOP
Very high-quality smartphone holder for motorbikes made of AL 6063 CNC-milled aluminium. Absolutely secure attachment of the smartphone.
It is not possible for it to fall out, even with the strongest vibrations.
The smartphone can be clamped in the holder in portrait or landscape format.
The holder can be adjusted from 58mm to 100mm and easily holds smartphones even with a protective cover.
32,40 Dollar
 
incl. 19% tax excl. Shipping costs
Oil lock screw - ORANGE - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
Oil lock screw - ORANGE - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
including sheet metal for receiving the safety wire.
The colour of the anodisation may change slightly when exposed to heat. This is not a reason for complaint, as it is unavoidable.
The rubber seal from the old lock can be reused....... YOUTUBE Video
33,75 Dollar
 
incl. 19% tax excl. Shipping costs
Oil lock screw - BLACK - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
Oil lock screw - BLACK - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
including sheet metal for receiving the safety wire. The rubber seal from the old lock can be reused....... YOUTUBE Video
33,75 Dollar
 
incl. 19% tax excl. Shipping costs
WHEEL PADS Rear Axle - Nylon Pads - EVOTECH PERFORMANCE
Optimal protection for swingarm and fork with a slight fall or overturning of the motorcycle.
Good protection for expensive motorcycle parts. Mounting on the rear wheel axle.
Assembly time approx. 10min. each axis
Weight: 220 grams per axlespare parts.
INSTALLATION

 
78,30 Dollar
 
incl. 19% tax excl. Shipping costs
Brake lining Brembo Sinter 07BB2065 - rear wheel
original equipment flooring
Type 50, sintered metal
Design: Brake lining (disc brake)
Brake pad: Sintered metal OEM
width: 50,8 mm
height: 53,7 mm
thickness: 7,4 mm
With ABE
Suitable for the following motorcycles:
FAHRZEUGLISTE

 
54,00 Dollar
 
incl. 19% tax excl. Shipping costs
WHEEL PADS FRONT AXLE - Nylon Pads - EVOTECH PERFORMANCE
Optimal protection for swingarm and fork with a slight fall or overturning of the motorcycle.
Good protection for expensive motorcycle parts. Mounting on the front wheel axle.....

INSTALLATION
62,10 Dollar
 
incl. 19% tax excl. Shipping costs
License plate and reflector mounting kit
Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts
9,45 Dollar
 
incl. 19% tax excl. Shipping costs
Reinforced number plate made of ALUCOBOND® material 180 x 200 mm
TOP
Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light ALUCOBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.
The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
We stuck the number plate with mirror tape with 3 strips. Optically perfect and holds.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
16,20 Dollar
 
incl. 19% tax excl. Shipping costs
Spare spindle head for Evotech Performance axle protectors
Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.

Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm
10,80 Dollar
 
incl. 19% tax excl. Shipping costs
Crash protector replacement  60 x 70 mm- EVOTECH PERFORMANCE
REPLACEMENT CRASH PROTECTOR  EVOTECH PERFORMANCE - 1 Pieces
60 mm x 70 mm
29,70 Dollar
 
incl. 19% tax excl. Shipping costs
License plate holder KTM 1290 SuperDuke R / SE 2014 - 2019 from Progress Line
The license plate holder convinces with a long service life and very good weather resistance.
black powder-coated
the licence plate holder is suitable for every type of licence plate (width 175 mm)
  • no fairing parts have to be changed
  • Inclination angle can be adjusted without gaps
  • Blinker holders are adjustable in 3 positions and correspond to the distance according to StvO....
120,15 Dollar
 
incl. 19% tax excl. Shipping costs
Rectifier protection for KTM 1290 SDR EVOTECH PERFORMANCE
TOP
Rectifier protection for KTM 1290 SD R
This rectifier protection model 2014 - 2019 fits when used with:
original pillion footrests or only with right EVOTECH EXHAUST HOLD (or similar) or even if both are not mounted.
This holder fits therefore with every variation.
All screws and mounting parts are included.
INSTALLATION
51,30 Dollar
 
incl. 19% tax excl. Shipping costs
Motor protection for KTM 1290 SDR from 2014 from EVOTECH PERFORMANCE
Evotech Performance has designed and manufactured a motor protection for the KTM 1290 R (2014-2019) Superduke
INSTALLATION

YOUTUBE Video


 
162,00 Dollar
 
incl. 19% tax excl. Shipping costs
Akrapovic DB KILLER / DB EATER for Akrapovic Muffler 61305979030
TOP
Akrapovic DB-Killer for KTM 1290
Original spare part.
A so-called noise reduction application.
diameter: 53mm, length: 176mm, inside diameter: 43mm
Material: stainless steel
81,00 Dollar
 
incl. 19% tax excl. Shipping costs
Show 1 to 45 (from a total of 50 products)
Here you can find noble accessories from EVOTECH PERFORMANCE for your KTM 1290 R from 2017 to 2019