MAIN PAGE » KTM 1290 » KTM 1290 GT 2016 +

KTM 1290 GT 2016 +

KTM 1290 GT up to 2016 License plate holder EVOTECH PERFOMANCE

Machined from billet aluminium and matt black coated. The original license plate light (not included) is retained.
Plug & Play only, so no additional wiring is required.
Please note that this item cannot be used in the USA unless there are KTM LED displays.
INSTALLATION

336,15 Dollar

incl. 19% tax excl. Shipping costs

KTM 1290 Super Duke GT Crash Protector from 2016 by Evotech Performance

Evotech Performance has designed and manufactured crash protectors for the KTM 1290 Superduke GT that are incredibly easy to fit.
They simply attach to the existing mounting points on your bike.
No modifications to your bike are required.
All our crash guards are CNC machined from aircraft grade aluminium.
They are powder coated black for durability.
The protectors are made from high performance engineering polymer.
In the event of a fall, the protectors are available from us as spare parts.
INSTALLATION

398,25 Dollar

incl. 19% tax excl. Shipping costs

Clutch cover transparent for LC8 KTM engine in black by EVOTECH Italy

Clutch cover for LC8 KTM engine - Black by EVOTECH Italy
Scope of delivery:
Black clutch cover - without the clutch release. This must be ordered separately.
Only suitable for the LC8 KTM engine (1290 R, GT, Adventure)
CNC machined from billet aluminium in Italy.
The set is equipped with 5 longer screws made of galvanised steel. Coloured aluminium screws are available as an alternative.
The sealing ring from the installed clutch cover can be used (not included in the delivery, but also available).
There is a video here on YouTube

302,40 Dollar

incl. 19% tax excl. Shipping costs

Clutch release / pressure plate ORANGE KTM 1290 SDR/GT LC8 Motor

48,60 Dollar

incl. 19% tax excl. Shipping costs

Clutch Release / Pressure Plate Black KTM 1290 SDR/GT LC8 Engine

48,60 Dollar

incl. 19% tax excl. Shipping costs

clutch cover Formring KTM LC8 1290ccm

Formring clutch cover KTM LC8 1290ccm
Sealing ring for the original or transparent clutch cover from Evotech SRL
The sealing ring cannot be inserted, but must be pushed in piece by piece, so to speak.
Otherwise it will be too long when you put it in.

10,80 Dollar

incl. 19% tax excl. Shipping costs

Screw for clutch cover KTM 1290 by Evotech Italy - ORANGE

Aluminium screws M6 for clutch cover KTM 1290 made of Ergal 7075 by Evotech Italy
For use on the original - and on the EVOTECH clutch cover you need the following quantities and dimensions:
3 x 85 mm and 2 x 25 mm (original length).
When using the EVOTECH clutch cover protector (PRO-09-01) you need the following quantities and dimensions:
1 x 25 mm, 1 x 30 mm, 2 x 85 mm, 1 x 90 mm
Tightening torques: 8 NM

from 3,11 Dollar

incl. 19% tax excl. Shipping costs

Screw for clutch cover KTM 1290 by Evotech Italy - Black

from 3,11 Dollar

incl. 19% tax excl. Shipping costs

KTM 1290 engine bolt set - 36 pcs. black anodised by Evotech Italy

KTM 1290 engine bolt set M6 - 36 pcs. black anodised by Evotech Italy
Duraluminium screws in Ergal 7075 T6 for the engine.
This kit contains screws of the same length as the original screws.
Please unscrew one original screw at a time and replace it with the duraluminium screw.
Please do not unscrew all screws at once.
It is also recommended to oil or grease the thread of the screws accordingly during assembly.
Tightening torque: 10NM
Price per screw: 3,02 €

147,15 Dollar

incl. 19% tax excl. Shipping costs

Clutch cover Protection for KTM 1290 - BLACK - EVOTECH S.R.L

Protection for clutch cover - BLACK anodized incl. 2 longer screws.
Fits the original clutch cover and the transparent clutch cover from EVOTECH S.R.L.
CNC milled from aluminium.
HERE there is a matching YOUTUBE video........

51,30 Dollar

incl. 19% tax excl. Shipping costs

Clutch cover Protection for KTM 1290 - ORANGE - EVOTECH S.R.L

Protection for clutch cover - ORANGE anodized incl. 2 longer screws.
Fits the original clutch cover and the transparent clutch cover from EVOTECH S.R.L.
CNC milled from aluminium.
The colour of the anodisation may change slightly when exposed to heat. This is not a reason for complaint, as it is unavoidable.
HERE there is a matching YOUTUBE video........

51,30 Dollar

incl. 19% tax excl. Shipping costs

KTM 1290 R engine guard left - Orange - Evotech S.R.L

Protection for engine cover left - ORANGE anodised incl. 4 longer screws (M6 x 35 mm).
CNC milled from aluminium.
The colour of the anodisation may change slightly when exposed to heat. This is not a reason for complaint, as it is unavoidable.
HERE you can find a YOUTUBE video about it.

213,30 Dollar

incl. 19% tax excl. Shipping costs

KTM 1290 R engine guard left - Black - Evotech S.R.L

Protection for engine cover left - BLACK anodised incl. 4 longer screws (M6 x 35 mm).
CNC milled from aluminium.
HERE you can find a YOUTUBE video about it.

213,30 Dollar

incl. 19% tax excl. Shipping costs

KTM 1290 hook spanner galvanised steel chain tensioner

You don't want to get out the toolbox and put together the rickety KTM tool every time you want to tighten your chain?
Then here is the right tool for you. Made of 4 mm galvanised steel with recessed grip and hole for hanging on the tool wall.

29,70 Dollar

incl. 19% tax excl. Shipping costs

Chainring carrier KTM 1290 Super Duke R / GT - EVOTECH - Orange

KTM 1290 chainring carrier Super Duke R / GT
CNC made of billet aluminium in Italy. Orange or black anodized for long durability.
Optionally, the matching nut set can be used. The standard nuts also fit.
Only the original chainring carrier is replaced.
The shock absorber is not changed.
The conversion takes about 30 minutes.
Assembly & product video here: YOUTUBE

229,50 Dollar

incl. 19% tax excl. Shipping costs

Chainring carrier KTM 1290 Super Duke R / GT - EVOTECH S.R.L. - BLACK

229,50 Dollar

incl. 19% tax excl. Shipping costs

Garmin Navi mount on Evotech Performance bracket system

With this interface plate you can convert your Navi mount (from Evotech Performance) to the Garmin mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Compatible with all Zumo models.
Note: The Garmin Motorcycle Navi is not included.

40,50 Dollar

incl. 19% tax excl. Shipping costs

EP Alloy nut M10x1.25 for chainring carrier KTM 1290 SDR / GT

Aluminium nut set M10x1.25 (6026 T 6 - high strength)
in ORANGE anodised for original chainring carrier or the chainring carrier shown in the other photos.
The price is for 1 nut in orange
For the KTM 1290 SDR / GT
(6 pieces are required)
Tightening torque 45 Nm

6,75 Dollar

incl. 19% tax excl. Shipping costs

TomTom Navi mount on Evotech Performance bracket system

With this interface plate you can convert your Navi mount (from Evotech Performance) to the TomTom mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Note: The TomTom Motorcycle Navi is not included.

40,50 Dollar

incl. 19% tax excl. Shipping costs

EP Aluminium nut M10x1.25 for chainring carrier KTM 1290 SDR / GT

6,75 Dollar

incl. 19% tax excl. Shipping costs

EP Alloy nut M10x1.25 for chainring carrier - RED

Aluminium nut set M10x1.25 (6026 T 6 - high strength)
in RED anodised for original chainring carrier or the chainring carrier shown in the other photos.
The price is for 1 nut in RED
For the KTM 1290 SDR / GT
(6 pieces are required)
Tightening torque 45 Nm

6,75 Dollar

incl. 19% tax excl. Shipping costs

Rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - BLACK - Left

Very high quality duraluminium nut (7075T6) for the left side of the chain wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut left side with 41 mm wrench size.

66,15 Dollar

incl. 19% tax excl. Shipping costs

Rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - BLACK - Right

Very high quality duraluminium nut (7075T6) for the right side of the rear wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut right side with 60 mm wrench size.

76,95 Dollar

incl. 19% tax excl. Shipping costs

Rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - Orange - Right

76,95 Dollar

incl. 19% tax excl. Shipping costs

Rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - Orange - Left

Very high quality duraluminium nut (7075T6) for the left side of the rear wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut left side with 41 mm wrench size.

66,15 Dollar

incl. 19% tax excl. Shipping costs

Smartphone holder with USB connection GUB-E

Very high-quality smartphone holder for motorbikes made of AL 6063 CNC-milled aluminium. Absolutely secure attachment of the smartphone.
It is not possible for it to fall out, even with the strongest vibrations.
The smartphone can be clamped in the holder in portrait or landscape format.
The holder can be adjusted from 58mm to 100mm and easily holds smartphones even with a protective cover.

32,40 Dollar

incl. 19% tax excl. Shipping costs

Oil lock screw - ORANGE - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke

Oil lock screw - ORANGE - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
including sheet metal for receiving the safety wire.
The colour of the anodisation may change slightly when exposed to heat. This is not a reason for complaint, as it is unavoidable.
The rubber seal from the old lock can be reused....... YOUTUBE Video

33,75 Dollar

incl. 19% tax excl. Shipping costs

Oil lock screw - BLACK - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke

Oil lock screw - BLACK - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
including sheet metal for receiving the safety wire. The rubber seal from the old lock can be reused....... YOUTUBE Video

33,75 Dollar

incl. 19% tax excl. Shipping costs

WHEEL PADS Rear Axle - Nylon Pads - EVOTECH PERFORMANCE

Optimal protection for swingarm and fork with a slight fall or overturning of the motorcycle.
Good protection for expensive motorcycle parts. Mounting on the rear wheel axle.
Assembly time approx. 10min. each axis
Weight: 220 grams per axlespare parts.
INSTALLATION

83,70 Dollar

incl. 19% tax excl. Shipping costs

Brake lining Brembo Sinter 07BB2065 - rear wheel

original equipment flooring
Type 50, sintered metal
Design: Brake lining (disc brake)
Brake pad: Sintered metal OEM
width: 50,8 mm
height: 53,7 mm
thickness: 7,4 mm
With ABE
Suitable for the following motorcycles:
FAHRZEUGLISTE

54,00 Dollar

incl. 19% tax excl. Shipping costs

WHEEL PADS FRONT AXLE - Nylon Pads - EVOTECH PERFORMANCE

Optimal protection for swingarm and fork with a slight fall or overturning of the motorcycle.
Good protection for expensive motorcycle parts. Mounting on the front wheel axle.....
INSTALLATION

62,10 Dollar

incl. 19% tax excl. Shipping costs

License plate and reflector mounting kit

Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts

10,80 Dollar

incl. 19% tax excl. Shipping costs

Radiator guard SuperDuke GT / Adventure from Evotech Performance

The radiator guard fits exactly on the existing attachment points of your

KTM 1290 SuperDuke GT 2016 +
KTM 1050 Adventure 2015 - 2016
KTM 1090 ADVENTURE Guard 2017 - 2018
KTM 1190 Adventure R 2013 - 2016
KTM 1190 Adventure 2013 - 2016
KTM 1290 Super Adventure 2015 – 16
INSTALLATION

110,70 Dollar

incl. 19% tax excl. Shipping costs

Reinforced number plate made of ALUCOBOND® material 180 x 200 mm

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light ALUCOBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.
The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
We stuck the number plate with mirror tape with 3 strips. Optically perfect and holds.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.

16,20 Dollar

incl. 19% tax excl. Shipping costs

EVOTECH PERFORMANCE Rectifier protection for KTM 1290 GT

KTM 1290 GT Evotech Performance has developed a frame cover grid to protect the rectifier.
CNC-machined from aircraft aluminium.
Black powder-coated on the outside.
The protective grille can be installed in a few minutes.
No modification to the motorcycle required.
All fixings are included in the kit.
Suitable from 2016
INSTALLATION

48,60 Dollar

incl. 19% tax excl. Shipping costs

Spare spindle head for Evotech Performance axle protectors

Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.
Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm