KTM 1290 R 2020 +

Here you can find noble accessories from EVOTECH PERFORMANCE for your KTM 1290 R from 2020
Here you can find noble accessories from EVOTECH PERFORMANCE for your KTM 1290 R from 2020
Reinforced spare plate for license plate holder KTM 1290 Super Duke R - 2020
Replacement plate (made of 4 mm material) for license plate holder KTM 1290 Super Duke R from 2020. In the first series there were once problems due to breakage, because the first plates were only 3 mm thick. If your plate (from the first series) is broken, you will be refunded the purchase price for the item. For this we need your customer or order number which was transmitted with the purchase of the license plate holder. The current holders are already equipped with this 4 mm plate.
Please measure the old plate before ordering.
27,00 Dollar
incl. 19% tax excl. Shipping costs
Turn signal adapter kit for turn signal with M8 fastening thread
With our turn signal adapter kit you can mount turn signals with a M8 mounting thread.
This kit contains adapters for front and rear turn signals.
We deliver 4 new extended sleeves made of stainless steel to fix the turn signals in their position.
No modifications to the wiring harness are required, just plug and play with our direct wiring harness connectors.
This article is designed to be used in conjunction with the Evotech Performance KTM 1290 Super Duke R license plate holder.
60,75 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 Super Duke R from 2020 Garmin Navi Holder by Evotech Performance
The Evotech Performance Garmin-compatible sat nav mount for the KTM 1290 Super Duke R mounts in the rider's peripheral field of vision to keep the right path in front of you while riding.   The holder is simply attached to the tank cap with the help of our INSTALLATION , the Garmin motorbike sat nav can then be attached in the rider's field of vision and adjusted with the thumbscrew behind the screen.

The holder is supplied without the sat nav. Compatible with all Zumo models
114,75 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 Super Duke R from 2020 Garmin TOM TOM Holder by Evotech Performance
Features of the TomTom compatible navi mount for the KTM 1290 Super Duke R from Evotech Performance
The Evotech Performance TomTom-compatible sat nav mount for the KTM 1290 Super Duke R mounts in the rider's peripheral field of vision to keep the right path in front of you while riding.   The holder is simply attached to the tank cap with the help of our INSTALLATION , the TomTom motorbike sat nav can then be attached in the rider's field of vision and adjusted with the thumbscrew behind the screen.

The holder is supplied without the sat nav.
114,75 Dollar
incl. 19% tax excl. Shipping costs
Indicator adapter set for Evotech Performance number plate holder
Indicator adapter set for Evotech Performance number plate holder
27 mm high and 37 mm high
39,15 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 Super Duke R from 2020 Quad Lock compatible nav mount from Evotech Performance
Features of the Quad Lock compatible sat nav mount for the KTM 1290 Super Duke R from Evotech Performances.

The Evotech Performances Quad Lock compatible sat nav mount for the KTM 1290 Super Duke R mounts in the rider's peripheral field of vision to keep the right path in front of you while riding.   The holder is simply attached to the tank cap with the help of our INSTALLATION, the navi can then be attached in the rider's field of vision and adjusted with the thumbscrew behind the screen.

The holder is supplied without the sat nav.
137,70 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 R 2020+ Navigation Holder SP Connect by Evotech Performance
NEW
Features of the Evotech Performance SP Connect compatible nav mount for the KTM 1290 Super Duke R.

    Attaches directly to the tank cap trim with no modifications required
    SP Connect mounting point fully integrated into the mount
    Wing screws allow screen angle to be changed
    Bracket CNC machined from lightweight aluminum
    Powder coated black for durability
    For illustrated online installation instructions, click here: INSTALLATION
 
What is a motorcycle phone mount?  

The EP SP Connect-compatible nav mount for the KTM 1290 Super Duke R mounts over the center handlebar clamp and is in the rider's field of view to facilitate navigation while riding. The SP Connect interface allows quick and easy access to your smartphone, while the two-stage locking system securely attaches your phone to the bike.   The easy-to-install smartphone GPS mount comes with all the necessary mounting hardware included in the kit.  

Note: Our mount works in conjunction with the SP micro stem mount alu #53122 and anti-vibration module #53135.
SP Connect interface plate #53122, smartphone case, connection cable and smartphone are not included.
114,75 Dollar
incl. 19% tax excl. Shipping costs
CRASH PROTEKTOR KTM 1290 R  up to 2020  Evotech Performance
Evotech Performance have designed and manufactured KTM 1290 R up to 2020 Superduke crash protection bobbins that are incredibly easy to fit.
Simply attaching to your bike’s existing mounting points, No modification is required.......
INSTALLATION
376,65 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 R Engine Guard Black by Evotech Performance 2020+
Evotech Performance has developed and manufactured an engine guard for the KTM 1290 Super Duke R from model year 2020.
The noble part is CNC-milled from aircraft-quality aluminium.
This engine guard is powder-coated for durability.
Black side panels
The unique design allows air to circulate through the engine guard while still providing a high level of protection from road debris.
This engine guard for your KTM 1290 R 3.0 comes with all the necessary fasteners.
You can find easy-to-understand, illustrated instructions here: INSTALLATION
324,00 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 Super Duke R Flyscreen 2020+ by Evotech Performance
TOP
Evotech Performance has designed and manufactured a fly screen for the KTM 1290 Super Duke R.
Injection moulded from high quality ABS for excellent functional definition and surface finish.
The Evotech Performance flyscreen attaches to your motorbike's existing mounting points.
No modifications to your motorbike are required.
Our brackets are CNC machined from aluminium and powder coated black for durability.
All necessary hardware is supplied with the kit.
Easy to follow illustrated instructions are available here: INSTALLATION
113,40 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 R Engine Guard orange by Evotech Performance 2020+
TOP
Evotech Performance has developed and manufactured an engine guard for the KTM 1290 Super Duke R from model year 2020.
The noble part is CNC-milled from aircraft-quality aluminium.
This engine guard is powder-coated for durability.
Orange side panels provide that classic KTM feel.
The unique design allows air to circulate through the engine guard while still providing a high level of protection from road debris.
This engine guard for your KTM 1290 R 3.0 comes with all the necessary fasteners.
You can find easy-to-understand, illustrated instructions here: INSTALLATION
322,65 Dollar
incl. 19% tax excl. Shipping costs
Radiator guard KTM 1290 SuperDuke R from 2020 by Evotech Performance
The radiator guard fits exactly to the existing mounting points of your KTM 1290 SDR from 2020.
No changes to the motorcycle are necessary.
Hexagonal hole pattern to optimise the air flow with maximum protection against road debris.
CNC machined from aircraft aluminum.
Black powder coated for durability.
No other screws are needed.
Assembly time approx. 15 min.
INSTALLATION
112,05 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 Super Duke R 2020+ passenger footrest cover set
The Evotech Performance Set is required when removing the pillion footrests and is attached to the existing attachment points.
No modifications to your motorcycle are necessary.
CNC machined from aircraft quality aluminium.
Black anodized for durability.
37,80 Dollar
incl. 19% tax excl. Shipping costs
Clutch Release / Pressure Plate Black KTM 1290 SDR/GT LC8 Engine
Clutch Release / Pressure Plate Black KTM 1290 SDR/GT LC8 Engine
48,60 Dollar
incl. 19% tax excl. Shipping costs
clutch cover Formring KTM LC8 1290ccm
Formring clutch cover KTM LC8 1290ccm
Sealing ring for the original or transparent clutch cover from Evotech SRL
The sealing ring cannot be inserted, but must be pushed in piece by piece, so to speak.
Otherwise it will be too long when you put it in.

 
10,80 Dollar
incl. 19% tax excl. Shipping costs
Screw for clutch cover KTM 1290 by Evotech Italy - ORANGE
TOP
Aluminium screws M6 for clutch cover KTM 1290 made of Ergal 7075 by Evotech Italy
For use on the original - and on the EVOTECH clutch cover you need the following quantities and dimensions:
3 x 85 mm and 2 x 25 mm (original length).
When using the EVOTECH clutch cover protector (PRO-09-01) you need the following quantities and dimensions:
1 x 25 mm, 1 x 30 mm, 2 x 85 mm, 1 x 90 mm
Tightening torques: 8 NM
from 3,11 Dollar
incl. 19% tax excl. Shipping costs
Screw for clutch cover KTM 1290 by Evotech Italy - Black
TOP
Aluminium screws M6 for clutch cover KTM 1290 made of Ergal 7075 by Evotech Italy
For use on the original - and on the EVOTECH clutch cover you need the following quantities and dimensions:
3 x 85 mm and 2 x 25 mm (original length).
When using the EVOTECH clutch cover protector (PRO-09-01) you need the following quantities and dimensions:
1 x 25 mm, 1 x 30 mm, 2 x 85 mm, 1 x 90 mm
Tightening torques: 8 NM
from 3,11 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 engine bolt set - 36 pcs. black anodised by Evotech Italy
KTM 1290 engine bolt set M6 - 36 pcs. black anodised by Evotech Italy
Duraluminium screws in Ergal 7075 T6 for the engine.
This kit contains screws of the same length as the original screws.
Please unscrew one original screw at a time and replace it with the duraluminium screw.
Please do not unscrew all screws at once.
It is also recommended to oil or grease the thread of the screws accordingly during assembly.
Tightening torque: 10NM
Price per screw: 3,02 €
147,15 Dollar
incl. 19% tax excl. Shipping costs
6 Aluminium screws M5 x 30 for the tank cap KTM 1290 made of Ergal 7075 by Evotech Italy
Aluminium screws M5 x 30 for the tank cap KTM 1290 made of Ergal 7075 by Evotech Italy
Tightening torque: 5 NM
Also fits Ducati Multistrada 1200/1260 and Hypermotard 950
17,55 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 hook spanner galvanised steel chain tensioner
You don't want to get out the toolbox and put together the rickety KTM tool every time you want to tighten your chain?
Then here is the right tool for you. Made of 4 mm galvanised steel with recessed grip and hole for hanging on the tool wall.
29,70 Dollar
incl. 19% tax excl. Shipping costs
Brake caliper protection for Brembo brake calipers from Evotech Performance - Front
Evotech Performance has designed and manufactured a protection to protect your Brembo brake calipers.
These brake caliper protectors can be fitted to your motorcycle without any modifications.
CNC machined from aircraft grade aluminium.
Finished with a durable black powder coating.
All necessary fixings are supplied with the kit.
Delivered are 1 pair for 2 brake calipers
fits on thies Models 
HERE
INSTALLATION
39,15 Dollar
incl. 19% tax excl. Shipping costs
Chainring carrier KTM 1290 Super Duke R / GT - EVOTECH S.R.L. - BLACK
KTM 1290 chainring carrier Super Duke R / GT
CNC made of billet aluminium in Italy. Orange or black anodized for long durability.
Optionally, the matching nut set can be used. The standard nuts also fit.
Only the original chainring carrier is replaced.
The shock absorber is not changed.
The conversion takes about 30 minutes.
Assembly & product video here:
YOUTUBE
229,50 Dollar
incl. 19% tax excl. Shipping costs
Garmin Navi mount on Evotech Performance bracket system
NEW
With this interface plate you can convert your Navi mount (from Evotech Performance) to the Garmin mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate  
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Compatible with all Zumo models.
Note: The Garmin Motorcycle Navi is not included.
40,50 Dollar
incl. 19% tax excl. Shipping costs
TomTom Navi mount on Evotech Performance bracket system
NEW
With this interface plate you can convert your Navi mount (from Evotech Performance) to the TomTom mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate  
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Note: The TomTom Motorcycle Navi is not included.
40,50 Dollar
incl. 19% tax excl. Shipping costs
EP Alloy nut M10x1.25 for chainring carrier - RED
Aluminium nut set M10x1.25 (6026 T 6 - high strength)
in RED anodised for original chainring carrier or the chainring carrier shown in the other photos.
The price is for 1 nut in RED
For the KTM 1290 SDR / GT
(6 pieces are required)
Tightening torque 45 Nm
6,75 Dollar
incl. 19% tax excl. Shipping costs
Rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - BLACK - Left
Very high quality duraluminium nut (7075T6) for the left side of the chain wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut left side with 41 mm wrench size.
66,15 Dollar
incl. 19% tax excl. Shipping costs
Rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - BLACK - Right
Very high quality duraluminium nut (7075T6) for the right side of the rear wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut right side with 60 mm wrench size.
76,95 Dollar
incl. 19% tax excl. Shipping costs
Rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - Orange - Right
Very high quality duraluminium nut (7075T6) for the right side of the rear wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut right side with 60 mm wrench size.
76,95 Dollar
incl. 19% tax excl. Shipping costs
Rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - Orange - Left
Very high quality duraluminium nut (7075T6) for the left side of the rear wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut left side with 41 mm wrench size.
66,15 Dollar
incl. 19% tax excl. Shipping costs
Smartphone holder with USB connection GUB-E
TOP
Very high-quality smartphone holder for motorbikes made of AL 6063 CNC-milled aluminium. Absolutely secure attachment of the smartphone.
It is not possible for it to fall out, even with the strongest vibrations.
The smartphone can be clamped in the holder in portrait or landscape format.
The holder can be adjusted from 58mm to 100mm and easily holds smartphones even with a protective cover.
32,40 Dollar
incl. 19% tax excl. Shipping costs
Oil lock screw - ORANGE - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
Oil lock screw - ORANGE - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
including sheet metal for receiving the safety wire.
The colour of the anodisation may change slightly when exposed to heat. This is not a reason for complaint, as it is unavoidable.
The rubber seal from the old lock can be reused....... YOUTUBE Video
33,75 Dollar
incl. 19% tax excl. Shipping costs
Oil lock screw - BLACK - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
Oil lock screw - BLACK - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
including sheet metal for receiving the safety wire. The rubber seal from the old lock can be reused....... YOUTUBE Video
33,75 Dollar
incl. 19% tax excl. Shipping costs
WHEEL PADS Rear Axle - Nylon Pads - EVOTECH PERFORMANCE
Optimal protection for swingarm and fork with a slight fall or overturning of the motorcycle.
Good protection for expensive motorcycle parts. Mounting on the rear wheel axle.
Assembly time approx. 10min. each axis
Weight: 220 grams per axlespare parts.
INSTALLATION

 
83,70 Dollar
incl. 19% tax excl. Shipping costs
WHEEL PADS FRONT AXLE - Nylon Pads - EVOTECH PERFORMANCE
Optimal protection for swingarm and fork with a slight fall or overturning of the motorcycle.
Good protection for expensive motorcycle parts. Mounting on the front wheel axle.....

INSTALLATION
62,10 Dollar
incl. 19% tax excl. Shipping costs
License plate and reflector mounting kit
Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts
10,80 Dollar
incl. 19% tax excl. Shipping costs
Plate Illumination  EVOTECH with LED
EVOTECH LED license plate light with 4 mm thread
Cable length 30 cm
24,30 Dollar
incl. 19% tax excl. Shipping costs
Reinforced number plate made of ALUCOBOND® material 180 x 200 mm
Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light ALUCOBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.
The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
We stuck the number plate with mirror tape with 3 strips. Optically perfect and holds.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
16,20 Dollar
incl. 19% tax excl. Shipping costs
1 to 50 (from a total of 54)
Here you can find noble accessories from EVOTECH PERFORMANCE for your KTM 1290 R from 2020