Triumph Street Triple

Radiator Guard Triumph Street Triple S / R / RS  2017-2019
Evotech Performance radiator guards for Model 2017 - 2019 attach to your bike’s existing mounting points. 
No modifications are required to your motorcycle.
Hexagonal hole pattern to optimise airflow whilst providing maximum protection from road debris.
INSTALLATION

 
106,65 Dollar
 
incl. 19% tax excl. Shipping costs
Radiator Guard Triumph Street Triple S / R / RS  2020 +
Evotech Performance radiator guards for Model 2020 + attach to your bike’s existing mounting points. 
No modifications are required to your motorcycle.
Hexagonal hole pattern to optimise airflow whilst providing maximum protection from road debris.
INSTALLATION

 
106,65 Dollar
 
incl. 19% tax excl. Shipping costs
Triumph Street Triple from 2013 Footrest cover set
Evotech Performance footrest panels are CNC machined from aircraft grade aluminium.
Remove the original pins and install our panels to fill the cavity and prevent dirt from entering the motorbike.
Black powder coated for durability.
All fixings are included in the kit.

 
54,00 Dollar
 
incl. 19% tax excl. Shipping costs
Paddock stand recording for Triumph Street /Tiger by Evotech Performance
Evotech Performance's paddock stand coils are a must for motorbike maintenance.
Manufactured in Great Britain.
CNC-machined from high quality nylon.
Aluminium inside for extra strength.
All necessary fixings are supplied with the kit.

Suitable for the following MODELS
with installation instructions for the respective model
43,20 Dollar
 
incl. 19% tax excl. Shipping costs
Bremsbelag Brembo SA Sinter 07BB37SA - Front Site
TOP
-10%
Design: Brake lining (disc brake)
Brake lining: Sintered metal road
width: 102,2 mm
height: 42 mm
thickness: 7,7 mm
Suitable for the following motorcycles:
VEHICLE LIST
RRP 66,15 Dollar
Only 59,54 Dollar
 
incl. 19% tax excl. Shipping costs
Brake lining Brembo Sinter 07BB2065 - rear wheel
original equipment flooring
Type 50, sintered metal
Design: Brake lining (disc brake)
Brake pad: Sintered metal OEM
width: 50,8 mm
height: 53,7 mm
thickness: 7,4 mm
With ABE
Suitable for the following motorcycles:
FAHRZEUGLISTE

 
54,00 Dollar
 
incl. 19% tax excl. Shipping costs
License plate and reflector mounting kit
Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts
9,45 Dollar
 
incl. 19% tax excl. Shipping costs
Reinforced number plate made of ALUCOBOND® material 180 x 200 mm
NEW
TOP
Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light ALUCOBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.
The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
We stuck the number plate with mirror tape with 3 strips. Optically perfect and holds.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
16,20 Dollar
 
incl. 19% tax excl. Shipping costs
Rear wheel axle protection Triumph Street Triple from 2017 by Evotech Performance
Features of the rear axle protectors for the Triumph Street Triple/RS from 2017 onwards

    Designed and manufactured specifically for your 2017 and up Triumph Street Triple
    Rolled stainless steel spindle rod holds the coils in place
    Coil exterior made from injection moulded nylon
    Reinforced on both sides with a strong aluminium core
    Replacement spool heads can be purchased separately
    Easy to assemble
Fits the following MODELS
INSTALLATION
62,10 Dollar
 
incl. 19% tax excl. Shipping costs
Front wheel axle protection Triumph Street Triple from 2017 by Evotech Performance
Features of the front wheel axle protectors for the Triumph Street Triple/RS from 2017 onwards
Designed and manufactured specifically for your Triumph Street Triple from 2017 onwards
Rolled stainless steel spindle rod holds the coils in place
Coil exterior made from injection moulded nylon
Reinforced on both sides with a strong aluminium core
Replacement spool heads can be purchased separately
Easy to assemble
Fits the following  MODELS
INSTALLATION
62,10 Dollar
 
incl. 19% tax excl. Shipping costs
Spare spindle head for Evotech Performance axle protectors
Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.

Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm
10,80 Dollar
 
incl. 19% tax excl. Shipping costs
Show 1 to 12 (from a total of 12 products)