MAIN PAGE » BMW » BMW F 900 R / XR » BMW F 900 R / XR licence plate holder from 2020 -2024 by Evotech Performance




BMW F 900 R / XR licence plate holder from 2020 -2024 by Evotech Performance
- Product No.:
- PRN015165-C10
- Shipping time:
-
immediately ready for dispatch (abroad may vary)
- Stock:
- pieces
- Weight:
- 1 kg per piece
CNC machined and shaped aluminium short number plate holder.
The rear section has been designed and manufactured in such a way that the locking mechanism can be retained.
It attaches to the existing mounting points and definitely requires no modifications to the motorbike.
CNC machined and shaped aluminium replacement rear light bracket, indicator brackets and number plate bracket (powder coated black for durability).
The original number plate lighting and the standard turn signals can be used.Simply plug in and go.
All required fastening elements are included in the kit.
The licence plate (2nd picture) can be bent relatively easily to the desired angle by a few degrees (cold) without anything cracking.
Our rear lid is fully compatible with the OEM cases and top box.
Fits all BMW F 900 models from 2020 -2024 onwards
with reflector kit. You can find a matching number plate HERE
INSTALLATION
The rear section has been designed and manufactured in such a way that the locking mechanism can be retained.
It attaches to the existing mounting points and definitely requires no modifications to the motorbike.
CNC machined and shaped aluminium replacement rear light bracket, indicator brackets and number plate bracket (powder coated black for durability).
The original number plate lighting and the standard turn signals can be used.Simply plug in and go.
All required fastening elements are included in the kit.
The licence plate (2nd picture) can be bent relatively easily to the desired angle by a few degrees (cold) without anything cracking.
Our rear lid is fully compatible with the OEM cases and top box.
Fits all BMW F 900 models from 2020 -2024 onwards
with reflector kit. You can find a matching number plate HERE
INSTALLATION
- Product safety/TÜV :
- Manufacturer:
Evotech Performance
8 Beechings Way, Alford, Lincolnshire, LN13 9JE
+44(0) 1507 466729
sales@evotech-performance.com
Importer / first distributor:
EVOTECH GERMANY
Lothar Westphal
Eichendorffstr. 9
78239 Rielasingen
Tel.07731 8229019
mail @ evotechparts.com
General safety instructions for the product:
We recommend that you always consult a specialist workshop when installing our products or have this work carried out by a specialist. If you fit it yourself, please make sure that your motorbike is secure and that the product is only intended for your motorbike. The models for which the product is tested and intended can be found with each item.
To avoid damage to your motorbike during installation, we recommend covering all important/sensitive parts.
When fitting, use threadlocker if possible and observe the torque specifications. The fixing screws on the licence plate holder in particular should be secured with threadlocker. Loss of the licence plate holder due to lost screws can cause unpleasant damage.
General torque specifications can be found HERE
Licence plate holders from Great Britain do not have an ABE. The licence plate lighting has an E approval mark. The indicator spacing is 180 mm. Suitable adapters are usually included to bring the indicator spacing to the legally required 180 mm.
The legally required licence plate angle of 30 degrees cannot be complied with on all British licence plate holders, as they are mounted much further in the direction of travel and may come into contact with the tyre at 30 degrees.
The angle of 30 degrees must be checked and adjusted on the vehicle. Take the suspension travel of the motorbike into account. If space is tight, we recommend fitting the narrower version of the rear reflector.
We have also provided further information on TÜV/ABE HERE.
Unfortunately there are no reviews yet. Be the first who rates this product.
You must be logged in to submit a review. Login
Customers who bought this product bought also the following products:

Are you looking for a stable and visually clean solution for mounting your licence plate on your motorbike in Austria?
We offer a 3 mm thick, 100 gram lightweight DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the licence plate.
The plate is matt black on one side and glossy black on the other.
The plate is supplied without holes.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE licence plate holders. If not, it is available HERE.
We offer a 3 mm thick, 100 gram lightweight DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the licence plate.
The plate is matt black on one side and glossy black on the other.
The plate is supplied without holes.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE licence plate holders. If not, it is available HERE.
15,73 Dollar
.jpg)
Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm
The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT
15,73 Dollar

Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
1 x reflector (self-adhesive)
1 x reflector holder
2 x number adapter
6 x cable ties
6 x number plate screws
6 x number plate nuts
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
1 x reflector (self-adhesive)
1 x reflector holder
2 x number adapter
6 x cable ties
6 x number plate screws
6 x number plate nuts
10,89 Dollar
This product was added to our catalog on Monday, March 22, 2021.