MAIN PAGE » DUCATI » Multistrada 950, V2, 1200, 1260

Multistrada 950

Here you find accessories for your DUCATI Multistrada 950, V2 ab 2022, 1200, 1260

Ducati Multistrada 950, V2, 1200, 1260 licence plate holder from Evotech Performance

Evotech Performance has designed and manufactured a perfectly fitting rear end for your Ducati Multistrada.
CNC machined and moulded aluminium tail light bracket, indicator bracket and licence plate holder in aluminium (black powder coated for long life).
Our design includes a vacuum moulded plastic replacement base for a clean OEM finish.
The reflector kit is included in the scope of delivery.
Here is a complete overview of the MODELS on which this licence plate holder fits.
INSTALLATION

319,80 Dollar

incl. 19% tax excl. Shipping costs

Ducati-Multistrada-950--1200--1260-water-and-oil-cooler-protection

Ducati Multistrada 950, V2, 1200, 1260 water and oil cooler protection from Evotech Performance

Evotech Performance radiator, engine and oil cooler guards fit directly onto existing brackets.
No modifications to your motorbike are necessary.
This guard is CNC machined from aircraft grade aluminium.
The unique design allows airflow through the guard while maintaining a high level of protection.
Black powder coated for durability.
All necessary fixings are supplied in the kit.
Fits Ducati Multistrada 950, 1200, 1260 from 2015
Under MODEL you can see if your motorbike is included.
Installation instructions can be found here:
WASSERKÜHLERSCHUTZ
ÖHLKÜHLERSCHUTZ

153,75 Dollar

incl. 19% tax excl. Shipping costs

Ducati Multistrada 950 / S - Engine protection from 2017 by Evotech Performance

The Evotech Performance engine guards are fixed in position with the existing brackets and do not require any modifications.
This engine protector is CNC machined from aircraft grade aluminum.
The unique design allows airflow through the motor protector while providing a high level of protection.
Suitable on the following MODELS
The Ducati Multistrada engine guard is finished with a black powder coating for a long life.
INSTALLATION

153,75 Dollar

incl. 19% tax excl. Shipping costs

Ducati Multistrada 950 / S / V2 water / oil cooler and engine protection from Evotech Performance

Evotech Performance radiator, engine and oil cooler guards fit directly onto existing brackets.
No modifications to your motorcycle are required.
This guard is CNC machined from aircraft grade aluminum.
The unique design allows airflow through the guard while maintaining a high level of protection.
Powder coated black for durability.
All necessary fasteners are included in the kit.
Fits Ducati Multistrada 950, 950S, V2 from 2017.
Under MODEL you can see if your motorcycle is also included.
Installation instructions can be found here:
WASSERKÜHLERSCHUTZ
ÖHLKÜHLERSCHUTZ
MOTORSCHUTZ

293,97 Dollar

incl. 19% tax excl. Shipping costs

Ducati Multistrada V2 / V2 S Handguards (2022+) by Evotech Performance

Evotech Performance has produced a set of hand protectors for the Multistrada V2 and V2 S from 2022 Ducati motorbikes.
These handguards not only offer better protection than the OEM parts, but also weigh more at the handlebar end (OEM part 400 g per set, Evotech part 1104 g per set).
CNC machined from aircraft quality aluminium.
The black powder coating ensures durability.
The mounting is done at the existing mounting points.
No modifications to your motorbike are required.
All mounting hardware is supplied with the kit.
Easy to follow illustrated instructions are available for download: INSTALLATION

244,77 Dollar

incl. 19% tax excl. Shipping costs

Ducati rear wheel axle protection protector EVOTECH PERFORMANCE

The characteristics of the rear wheel axle protection for the Ducati
Fits the following Ducatis: All models

    Protects the swing arm and the sprocket
    Injection molded nylon coil with an aluminum carrier
    Stainless steel spindle rod with roller thread
    Red anodized hub stop for the outlet side
    Easy installation due to the rear wheel axle
    Spare coil heads can be purchased separately
INSTALLATION

78,72 Dollar

incl. 19% tax excl. Shipping costs

Ducati Multistrada 1260 / S - Engine protection from 2018 by Evotech Performance

The Evotech Performance engine guards are fixed in position with the existing brackets and do not require any modifications.
This engine protector is CNC machined from aircraft grade aluminum.
The unique design allows airflow through the motor protector while providing a high level of protection.
The Ducati Multistrada engine guard is finished with a black powder coating for a long life.
INSTALLATION

157,44 Dollar

incl. 19% tax excl. Shipping costs

Ducati Multistrada 1200 Engine protection from 2015 - 2017 by Evotech Performance

Fits on the Ducati Multistrada 1200, 1200 S, 1200S D Air, 1200 Pikes Peak from 2015 - 2017
The Evotech Performance engine guards are fixed in position with the existing brackets and do not require any modifications.
This engine protector is CNC machined from aircraft grade aluminum.
The unique design allows airflow through the motor protector while providing a high level of protection.
The Ducati Multistrada engine guard is finished with a black powder coating for a long life.
INSTALLATION

153,75 Dollar

incl. 19% tax excl. Shipping costs

Front axle protection Ducati from Evotech Performance

Optimal protection for swingarm or fork with a slight fall or overturning of the motorcycle.
Good protection for expensive motorcycle parts. Mounting on the front wheel axle.
Assembly time approx. 10min. each axis
Weight: 220 grams per axlespare parts.
Suitable for the following models
INSTALLATION

59,04 Dollar

incl. 19% tax excl. Shipping costs

Ducati Multistrada Hand Crash Protector from 2019 by Evotech Performance

Evotech Performance has produced a very good set of handguards for the Multistrada range of Ducati motorbikes.
These handguards not only offer more protection than the OEM parts, but also a heavier weight at the handlebar end (OEM part 400g per set, Evotech part 1104g per set).
CNC machined from aircraft grade aluminium.
The black powder coating ensures durability.
Attachment is to the existing mounting points.
No modifications to your motorbike are required.
All fixings are supplied with the kit.
Easy to follow illustrated instructions are available here: INSTALLATION
Fits the following MODELS

221,40 Dollar

incl. 19% tax excl. Shipping costs

Ducati Multistrada rear wheel axle protection protector EVOTECH PERFORMANCE

The features of the rear wheel axle guard for the Ducati Multistrada
Please note: Does not fit on the single-sided swingarm of the PikesPeak from 2022 and on the RS from 2024.
You need this MODEL for these motorbikes

Fits the following Ducatis: All models

Protects the swing arm and the sprocket
Injection molded nylon coil with an aluminum carrier
Stainless steel spindle rod with roller thread
Easy installation due to the rear wheel axle
Spare coil heads can be purchased separately
INSTALLATION

56,58 Dollar

incl. 19% tax excl. Shipping costs

Reinforced number plate made of DIBOND® material 180 x 200 mm

Reinforced number plate (D) 180 x 200 mm made of DIBOND® material

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm

The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.

The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT

15,99 Dollar

incl. 19% tax excl. Shipping costs

Ducati Multistrada 950, 1200, 1260 SP Connect Navigationshalter von Evotech Performance

Features of the Evotech Performance SP Connect compatible sat nav mount for the Ducati Multistrada
A VIDEO about the product
Fits the following MODELS
    Mounts a smartphone centrally in front of the rider
    Attaches via the screen mount frame
    SP Connect mounting point already integrated in the EP mount
    All other mounting parts included in the set
    Wing screws allow the angle of the screen to be adjusted

What do you need a motorbike phone mount for?

To access your smartphone while riding for applications such as audio and GPS, Evotech Performance has developed the SP Connect compatible navi mount.   Made from lightweight aluminium and finished in EP's signature black powder coating, the mount can be attached to the screen mount using the INSTALLATION s instructions.

126,69 Dollar

incl. 19% tax excl. Shipping costs

Ducati Multistrada 950, 1200, 1260 SP Connect Navigationshalter von Evotech Performance - 62 mm

Features of the SP Connect compatible nav mount for the Ducati Multistrada
Fits the following MODELS

    Places a smartphone centrally in front of the rider
    Attaches via the handlebar clamp
    SP Connect mounting point already integrated into the EP mount
    All other mounting parts are included in the kit
    Adjustable horizontal pivot point for good visibility

What is a motorcycle phone mount?
To access your smartphone while riding for applications like audio and GPS, EP has developed the SP Connect compatible nav mount.   Made of lightweight aluminum and reinforced with EP's signature black powder coating, the mount can be attached to the handlebar clamp using the online step-by-step instructions.
You can find them here: INSTALLATION
With the SP Connect mounting point already attached, the rider can secure their smartphone in their chosen SP Connect smartphone case.
Note: Our mount works in conjunction with the SP micro stem mount alu #53122 and the anti-vibration module #53135.

SP Connect interface plate #53122, smartphone case, connection cable and smartphone are not included.

72,57 Dollar

incl. 19% tax excl. Shipping costs

Ducati Multistrada Garmin compatible navigation holder from Evotech Performance

Features of the Evotech Performance Garmin compatible nav mount for the Ducati Multistrada.
Fits the following Ducati Multistrada MODELS

    Black powder coated aluminum mount with precision Garmin mounting point.
    The angle of the screen can be changed with thumbscrews behind the mounting point
    Attaches to the screen support frame
    No modification to the motorcycle required
    Installation instructions for this product can be found here: INSTALLATION

What is a motorcycle navigation device mount?
The Evotech Performance Navi Mount places a Garmin motorcycle navi in the rider's field of vision for easy access while riding. Constructed of lightweight aluminum and reinforced with a black powder coat finish, the mount installs quickly with the help of our INSTALLATION guide.   The mount attaches to the screen support frame with all necessary fasteners included in the kit.   For final adjustment, the angle of the screen can be adjusted to the driver using the thumbscrews behind the mounting point.
Please note: Garmin motorcycle navigation device is not included.
Compatible with all Zumo models.

126,69 Dollar

incl. 19% tax excl. Shipping costs

Ducati Multistrada navigation holder for Quad Lock by Evotech Performance

Features of the EP Quad Lock compatible nav mount for the Ducati Multistrada. All MODELS

    Places a smartphone centrally in front of the rider
    Attaches via the screen mount frame
    Quad Lock mounting point already integrated into the EP mount
    Compatible with all Quad Lock motorcycle mounts and Quad Lock motorcycle accessories
    All other mounts are included in the kit
    Wing screws can be used to adjust the angle of the screen
Here are the INSTALLATIONS instructions

141,45 Dollar

incl. 19% tax excl. Shipping costs

Ducati Multistrada 950, 1200, 1260 TomTom compatible sat nav holder from Evotech Performance

Ducati Multistrada 950, 1200, 1260, V2 TomTom compatible sat nav holder from Evotech Performance

Features of the EP TomTom-compatible sat nav mount for the Ducati Multistrada 950, 1200, 1260, V2
Suitable for the following MODELS

    Perfectly matched to the TomTom mounting system
    Positions a TomTom sat nav centrally in front of the rider
    The bracket is attached to the screen carrier frame
    Wing screws allow fine adjustment of the screen angle
    Online step-by-step mounting instructions are available: INSTALLATION
    Fully compatible with the TomTom anti-theft lock. Part No. 9uge.001.06

126,69 Dollar

incl. 19% tax excl. Shipping costs

Handlebar end weights aluminium universal in red by Evotech Italy

Handlebar end weights milled from special aluminium. They have an innovative design down to the last detail. The mounting point corresponds to that of the original. For this reason, fitting is very easy and quick. The screws are made of light but high-strength duraluminium and anodised in the same colour as the bar end weights.
Including several adapters and bushings to be able to use an inner diameter of 12.5 to 16.5 mm.

36,90 Dollar

incl. 19% tax excl. Shipping costs

DUCATI Sequential LED indicators from Evotech Performance (1 pair)

Evotech Performance offers state-of-the-art aftermarket indicators that improve the aesthetics and safety of your motorbike.
Suitable for the following DUCATI s
These precision-engineered indicators feature a robust aluminium housing that ensures durability and a sleek look. Their sequential flashing technology enhances visibility and style, providing an eye-catching and attention-grabbing signal.
Whether you're upgrading your bike to improve signalling or you're looking for a modern, minimalist design, Evotech Performance indicators are just the thing for your motorbike. Enhance your riding experience with these high-quality indicators that seamlessly combine form and function while meeting the highest quality and performance standards in the world of motorbike accessories.

    Aluminium housing
    Black anodised for durability
    400mm cable length with plugs / Plug&Play
    With ECE test mark

120,54 Dollar

incl. 19% tax excl. Shipping costs

Oil filler plug Honda,Ducati,Kawasaki,Triumph,Yamaha M20 x 2.5 from Evotech Italy

Evotech oil filler plugs are milled from solid aluminium. The special aluminium alloy makes the screw stable and firm. The special hexagon reduces the risk of theft. Radial holes, with which the filler plug can be protected against opening with safety wire, as required in racing. Special O-ring that is more resistant to oil, vapour and temperature.

29,52 Dollar

incl. 19% tax excl. Shipping costs

Ducati / Aprilia brake calliper spacer titanium 4 pieces from Evotech Performance

Evotech Performance has manufactured titanium brake caliper spacers to allow the removal of Ducati brake caliper reflectors (82718851AA and 82718841AA)
Suitable for the following MODELS
CNC machined from aerospace grade titanium. 3.5 grams of titanium per piece.
No modifications to your motorbike are required.
Simply unscrew, remove, replace and ride.
Easy to understand, illustrated instructions are available for download: INSTALLATION

All intellectual property rights are owned by Drury Precision Engineering Limited. Any infringement will be vigorously pursued. The Evotech Performance® brand name and the EP® logo are both registered trademarks of Drury Precision Engineering Ltd.

55,35 Dollar

incl. 19% tax excl. Shipping costs

Front brake caliper bolt set (Race) from Evotech Performance

Front brake caliper bolt set (Race) from Evotech Performance
Shank length : 55 mm
Suitable for the following MODELS

- Manufactured in-house by Evotech Performance
- Stainless steel brake calliper bolts with hexagon head: direct replacement for the original bolts
- EP's model specific design replicates bolt length, thread and thread pitch for a secure fit
- 316 austenitic stainless steel (marine grade) for exceptional corrosion resistance
- Pre-drilled hex head for safety wire (lockwire)
- 12mm hex head
- Flanged bolt head provides secure bearing surface
- Evotech front brake caliper bolt kit includes all required bolts for direct replacement of OE parts
- Independently tested to ISO 3506 by a UKAS ISO 17025 accredited test centre

68,88 Dollar

incl. 19% tax excl. Shipping costs

Front brake caliper bolt set (Street) from Evotech Performance

Front brake caliper bolt set (Street) from Evotech Performance
Shank length : 55 mm
Suitable for the following MODELS

- Manufactured in-house by Evotech Performance
- Stainless steel caliper bolts with round head: direct replacement for original bolts
- EP's model specific design replicates bolt length, thread and pitch for a secure fit
- 316 austenitic stainless steel (marine grade) for exceptional corrosion resistance
- Rolled threads for increased durability
- 8mm Allen key head
- The Evotech front brake caliper bolt set provides a complete set of bolts for your motorbike
- Independently tested to ISO 3506 by a UKAS ISO 17025 accredited test centre

60,27 Dollar

incl. 19% tax excl. Shipping costs

6 Aluminium screws M5 x 30 for the tank cap KTM 1290 made of Ergal 7075 by Evotech Italy

Aluminium screws M5 x 30 for the tank cap KTM 1290 made of Ergal 7075 by Evotech Italy
Tightening torque: 5 NM
Also fits Ducati Multistrada 1200/1260 and Hypermotard 950

15,99 Dollar

incl. 19% tax excl. Shipping costs

KTM 1290 / Ducati Streetfighter / Panigale hook spanner galvanised steel chain tensioner

steel Hook spanner galvanised chain tensioner

Tired of getting out the tool kit and putting the tools together every time you want to tighten your chain?
Then this is the right tool for you. Made of 4 mm galvanised steel with a hole for hanging on the tool wall.
Total length 40 cm
Custom-made for EVOTECHPARTS with engraving - Made in Germany

27,06 Dollar

incl. 19% tax excl. Shipping costs

Fuel filler cap set KTM 1290, Ducati Multistrada 1200/1260, Hypermotard 950 by Evotech Italy

Fuel filler cap made of CNC machined aluminium by EVOTECH Italy . This product simply replaces the aesthetic part of the original fuel filler cap while maintaining its original functional components.
Fits:
KTM 1290 R year of construction 2014 - 2016
Ducati Multistrada 1200/1260
Hypermotard 950

215,25 Dollar

incl. 19% tax excl. Shipping costs

Garmin Navi mount on Evotech Performance bracket system

With this interface plate you can convert your Navi mount (from Evotech Performance) to the Garmin mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Compatible with all Zumo models.
Note: The Garmin Motorcycle Navi is not included.

39,36 Dollar

incl. 19% tax excl. Shipping costs

SP Connect Navigation Interface Plate from Evotech Performance

This interface plate allows you to convert your Evotech Performance nav mount to the SP Connect mount system.
The mounts are machined from lightweight aluminium and feature EP's signature black powder coating.
The kit consists of:

    1 x interface plate
    1 x pivot plate
    Plus all necessary fixings

This item is only compatible with Evotech Performance pivot style sat nav mounts.
Note: Our mount works in conjunction with SP micro stem mount alu #53122 and anti-vibration module #53135.
SP Connect interface plate #53122, smartphone case, connection cable and smartphone are not included.

39,36 Dollar

incl. 19% tax excl. Shipping costs

Quad Lock Interface Plate Navi by Evotech Performance

The kit consists of:
   1 x Quad Lock bracket
    1 x interface plate
    Plus all necessary fittings

This item is only compatible with Evotech Performance pivot style sat nav mounts.
Note: Quad Lock interface smartphone case, connection cable, and smartphone are not included.

41,82 Dollar

incl. 19% tax excl. Shipping costs

USB A charger from Evotech Performance

The Evotech Performance Motorcycle USB Charger is a device that supplies power to electronic devices via a USB interface.
This article is equipped with USB A connection. With USB C connection you can find HERE
Extended range: The 2.2 metre long cable offers a long range so that you can conveniently install and mount the USB charger in different places on your motorbike. This flexibility ensures that the charger can be optimally positioned to be accessible while riding or parking.
Direct connection to the battery or ignition switch: Direct connection to the motorbike battery or ignition switch ensures a stable and reliable power source for the USB charger. However, we recommend connecting a fuse element in between. This direct wiring allows the charger to draw power directly from the motorbike's electrical system, ensuring a consistent and reliable power supply for chargers.
You can find an installation video HERE

35,67 Dollar

incl. 19% tax excl. Shipping costs

Quad Lock interface plate Navi from Evotech Performance

The kit consists of:
    1 x Quad Lock bracket
    1 x interface plate
    1 x pivot plate
    Plus all necessary fixings

This item is only compatible with Evotech Performance pivot style sat nav mounts.
Note: Quad Lock interface smartphone case, connection cable, and smartphone are not included.

55,35 Dollar

incl. 19% tax excl. Shipping costs

TomTom Navi mount on Evotech Performance bracket system

With this interface plate you can convert your Navi mount (from Evotech Performance) to the TomTom mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Note: The TomTom Motorcycle Navi is not included.

39,36 Dollar

incl. 19% tax excl. Shipping costs

Brake caliper protection for Brembo brake calipers from Evotech Performance

Brake caliper protection for Brembo brake calipers black/red from Evotech Performance - Front

Evotech Performance has designed and manufactured a protection to protect your Brembo brake calipers.
These brake caliper protectors can be fitted to your motorcycle without any modifications.
CNC machined from aircraft grade aluminium.
Finished with a durable black powder coating.
All necessary fixings are supplied with the kit.
Delivered are 1 pair for 2 brake calipers
INSTALLATION
Suitable for the following motorcycles: HERE

54,12 Dollar

incl. 19% tax excl. Shipping costs

License plate and reflector mounting kit

Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts

14,76 Dollar

incl. 19% tax excl. Shipping costs

Spare spindle head for Evotech Performance axle protectors

Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.
Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm

12,30 Dollar

incl. 19% tax excl. Shipping costs

Crash protector replacement 60 x 70 mm- Evotech Performance

REPLACEMENT CRASH PROTECTOR EVOTECH PERFORMANCE - 1 Pieces
60 mm x 70 mm

28,29 Dollar

incl. 19% tax excl. Shipping costs

1 to 36 (from a total of 36)

Here you find accessories for your DUCATI Multistrada 950, V2 ab 2022, 1200, 1260