MAIN PAGE » DUCATI » Panigale V4

Panigale V4 2018+, V4 S 2018+, V4 Speciale 2018+, V4 R 2019+, V4 S Corse 2019 +, V2 2020+

Here you find noble accessories from Evotech Performance and Evotech SRL for your
Panigals V4 2018+, V4 S 2018+, V4 Speciale 2018+, V4 R 2019+, V4 S Corse 2019 +

Ducati Panigale V4 , R, S, S Corse from 2018, Streetfighter V2 from 2022 license plate holder from Evotech Performance

This license plate holder from EVOTECH PERFORMANCE for your DUCATI PANIGALE from 2018 and Streetfighter V2 from 2022 is CNC machined from lightweight aircraft aluminum.
Finished with a tough satin black powder coat.
Suitable for the following MODELS
The original turn signals and license plate lighting can still be used.
This license plate holder was developed especially for the existing holders on your DUCATI Panigale / Streefighter and does not require any changes on your motorcycle.
No changes to the wiring are necessary, just plug and play.
All necessary mountings are included in the delivery.
The licence plate angle is approx. 40 degrees. The reflector kit is included
If you need a reinforced noble number plate, look HERE
An easy to understand illustrated manual is available here: INSTALLATION

293,82 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter / Panigale V4 / V2 number plate holder from 2020 by EVOTECHPARTS

EVOTECHPARTS has co-developed a shorter number plate holder and had it made exclusively for us in this design.
Fits all Ducati Streetfighter and Panigale models with the V2 or V4 engine (from 2020).
MADE IN GERMANY
You can find a YOUTUBE video HERE
Material: Black matt anodised aluminium incl. E-approved number plate light and reflector.
Included are 2 brackets for the standard turn signals which can still be used. The licence plate is also included in the delivery.
The angle plate, which is locked into the motorbike mount, is made of steel (black powder-coated).
The angle is adjustable and has the required 30° as shown.
The distance between the turn signals and the end of the tyre also meets the legal requirements of 30 cm.
Thus "ALL SAFE".
If you still need an additional licence plate, we can recommend this one: LICENCE PLATE PLATE
Visually a very nice solution

253,70 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale / Streetfighter V4 Radiator Guard Set 2018+ from Evotech Performance

This radiator guard from EVOTECH Performance fits exactly on the existing mounting points on your
Panigale V4 2018+, V4 S 2018+, V4 Speciale 2018+, V4 R 2019+, V4 S Corse 2019 +
Streetfighter V4 2020 +, V4 S 2020+
If you want to be sure if your model is included, have a look HERE
No changes are necessary when mounting the motorcycle.
INSTALLATION Panigale
INSTALLATION Streetfigher

165,20 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale V4 Fuel Tank Cover from 2021 by Evotech Performance

This fuel tank pillion footrest cover from EVOTECH Performance fits exactly to the existing fixing points on your Ducati Panigale V4, Ducati Panigale V4 S and Corse, Ducati Panigale V4 R, Ducati V4 Speciale, from model 2021 +
No changes are necessary when mounting the motorcycle. This tank cover can be fitted with or without the standard pillion pegs.
The hexagonal hole pattern is designed to optimise airflow with maximum protection from road debris. CNC manufactured from aircraft aluminum. Powder coated in black for durability. All necessary screws & assembly parts are included. Assembly time approx. 10 min.

67,26 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale V4 fuel tank cover 2018 - 2020

This fuel tank pillion footrest cover from EVOTECH Performance fits exactly to the existing fixing points on your Ducati Panigale V4, Ducati Panigale V4 S and Corse, Ducati Panigale V4 R, Ducati V4 Speciale, from model 2018 to 2020
No changes are necessary when mounting the motorcycle. The hexagonal hole pattern is designed to optimise airflow with maximum protection from road debris. CNC manufactured from aircraft aluminum. Powder coated in black for durability. All necessary screws & assembly parts are included. Assembly time approx. 10 min.

67,26 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale V4 Crash Protector from 2019 by Evotech Performance

Evotech Performance has designed and manufactured a unique crash guard for the main frame of the Ducati Panigale V4 range.
We designed the exit of the bracket through the gill-like side panels of the Panigale fairing plate.
The result is a crash protector kit with no drilling and no modifications to the bike.
This crash protector is easy to fit.
This protector simply attaches to the existing mounting points on your 2019 Ducati V4 (all models).
The mounting rods and brackets are CNC machined from aircraft grade aluminium.
They are powder coated black for durability.
The crash bar heads are made from a high performance engineering polymer.
All necessary fasteners are supplied with the kit.
Easy to follow illustrated instructions are available for download: INSTALLATION
We supply individual replacement crash protection parts if required.

341,02 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale / Streetfighter V4 Alu nuts for chainring carrier - 6 pieces - BLACK

Alu nut M10x1.00 for chainring carrier Ducati Panigale / Streetfighter V4 etc.
The price is for 6 pieces. This is how many are needed for the chainring carrier
Tightening torque 45 Nm

35,40 Dollar

incl. 19% tax excl. Shipping costs

Handlebar end weights aluminium universal in red by Evotech Italy

Handlebar end weights milled from special aluminium. They have an innovative design down to the last detail. The mounting point corresponds to that of the original. For this reason, fitting is very easy and quick. The screws are made of light but high-strength duraluminium and anodised in the same colour as the bar end weights.
Including several adapters and bushings to be able to use an inner diameter of 12.5 to 16.5 mm.

35,40 Dollar

incl. 19% tax excl. Shipping costs

55 mm socket spanner / nut with 3/4 inch (20.0 mm) square socket

55 mm nut with hexagon inside - fits rear wheel of Panigale / Streetfighter V4
.. for hand-operated socket wrench inserts
.. CV steel
.. 20.0 mm (3/4") internal square
.. DIN 3123 / ISO 3316
.. Scope of delivery 1 nut
.. If your torque tool has a 1/2 inch (12.5 mm) connection, you will still need this ADAPTER.

28,32 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale - Monster - XDiavel Brake and Clutch Lever Protectors by Evotech Performance

Evotech Performance has produced a brake and clutch lever guard kit for the Panigale V4, various Monster and XDiavel motorbikes.
To see which motorbike these guards will fit, click here under MODELS.
The lever guard is held in place by a unique machined cartridge expansion system.
CNC machined from aircraft grade aluminium and stainless steel.
No modifications are required to your motorbike.
The black powder coat finish ensures durability.
All fixings are supplied with the kit.

211,22 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale / Streetfighter V4 Alu nuts for chainring carrier - 6 pieces - RED

Alu nut M10x1.00 for chainring carrier Ducati Panigale / Streetfighter V4 etc.
The price is for 6 pieces. This is how many are needed for the chainring carrier
Tightening torque 45 Nm

35,40 Dollar

incl. 19% tax excl. Shipping costs

Ducati M25x1.25 nut for front wheel axle RED by Evotech Italy

Ducati M 25 x 1.25 nut for front wheel axle in RED by Evotech Italy
Width across flats 30 mm
Material: AL 7075 T6
Normal tightening torque.

31,86 Dollar

incl. 19% tax excl. Shipping costs

Ducati M25x1.25 nut for front wheel axle Black by Evotech Italy

Ducati M25x1.25 nut for front wheel axle RED by Evotech Italy - Kopie

Ducati M 25 x 1.25 nut for front wheel axle in BLACK by Evotech Italy
Width across flats 30 mm
Material: AL 7075 T6
Normal tightening torque.

31,86 Dollar

incl. 19% tax excl. Shipping costs

Ducati rear wheel axle protection protector EVOTECH PERFORMANCE

The characteristics of the rear wheel axle protection for the Ducati
Fits the following Ducatis: All models

    Protects the swing arm and the sprocket
    Injection molded nylon coil with an aluminum carrier
    Stainless steel spindle rod with roller thread
    Red anodized hub stop for the outlet side
    Easy installation due to the rear wheel axle
    Spare coil heads can be purchased separately
INSTALLATION

69,62 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale 1299/ 1199 und Streetfighter 1098/1198 chainring carrier - 6 Hole - Red

CNC machined from billet aluminium in Italy.
Red or black anodized for long durability.
Optionally the matching nut set can be used.
The standard nuts also fit.
Only the original chainring carrier will be replaced.
The shock absorber is not changed.
The time needed for the conversion takes about 30 minutes.
This chainring carrier fits:
Ducati Panigale 1299 / 1199 and Ducati Streetfighter 1098 / 1198 with 6 hole mount

RRP 182,90 Dollar
Only 141,60 Dollar

incl. 19% tax excl. Shipping costs

Ducati front wheel axle protection protector from Evotech Performance

Optimal protection for the fork in case of a slight fall or tipping over of the bike.
Good protection for expensive motorcycle parts. Mounting on the front wheel axle. 8mm rod with M8 thread.
Assembly time approx. 10min. per axle
Weight: 220 grams per axle
Fitting.....
INSTALLATION

54,28 Dollar

incl. 19% tax excl. Shipping costs

KTM 1290 / Ducati Streetfighter / Panigale hook spanner galvanised steel chain tensioner

You don't want to get out the toolbox and put together the rickety KTM tool every time you want to tighten your chain?
Then here is the right tool for you. Made of 4 mm galvanised steel with recessed grip and hole for hanging on the tool wall.

25,96 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale Garmin Compatible Navi Holder from Evotech Performance

Features of the Evotech Performance Garmin compatible nav mount for the Ducati Panigale. Check here if your MODEL is included.

    Black powder coated aluminium mount with precise Garmin mounting point.
    Adjustable horizontal pivot point for good visibility
    Attaches to the ignition lock cover
    No modification to the motorbike required
    Installation instructions can be found here: INSTALLATION

67,26 Dollar

incl. 19% tax excl. Shipping costs

Garmin Navi mount on Evotech Performance bracket system

With this interface plate you can convert your Navi mount (from Evotech Performance) to the Garmin mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Compatible with all Zumo models.
Note: The Garmin Motorcycle Navi is not included.

33,04 Dollar

incl. 19% tax excl. Shipping costs

SP Connect Navigation Interface Plate from Evotech Performance

This interface plate allows you to convert your Evotech Performance nav mount to the SP Connect mount system.
The mounts are machined from lightweight aluminium and feature EP's signature black powder coating.
The kit consists of:

    1 x interface plate
    1 x pivot plate
    Plus all necessary fixings

This item is only compatible with Evotech Performance pivot style sat nav mounts.
Note: Our mount works in conjunction with SP micro stem mount alu #53122 and anti-vibration module #53135.
SP Connect interface plate #53122, smartphone case, connection cable and smartphone are not included.

35,40 Dollar

incl. 19% tax excl. Shipping costs

Quad Lock Interface Plate Navi by Evotech Performance

The kit consists of:
    1 x Quad Lock bracket
    1 x interface plate
    1 x pivot plate
    Plus all necessary fixings

This item is only compatible with Evotech Performance pivot style sat nav mounts.
Note: Quad Lock interface smartphone case, connection cable, and smartphone are not included.

49,56 Dollar

incl. 19% tax excl. Shipping costs

TomTom Navi mount on Evotech Performance bracket system

With this interface plate you can convert your Navi mount (from Evotech Performance) to the TomTom mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Note: The TomTom Motorcycle Navi is not included.

35,40 Dollar

incl. 19% tax excl. Shipping costs

Ultimate Addons Navigation Interface Plate from Evotech Performance

With our interface plate you can convert your Evotech Performance nav mount to the Ultimate Addons mount system.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary connections
This item is only compatible with Evotech Performance pivot style navi mounts.
Note: Smartphone, connection cable, Ultimateaddons 3-pin adapter plate and smartphone case are not included.

37,76 Dollar

incl. 19% tax excl. Shipping costs

Bremsbelag Brembo SA Sinter 07BB37SA - Front Site

Design: Brake lining (disc brake)
Brake lining: Sintered metal road
width: 102,2 mm
height: 42 mm
thickness: 7,7 mm
Suitable for the following motorcycles:
VEHICLE LIST

RRP 57,82 Dollar
Only 46,02 Dollar

incl. 19% tax excl. Shipping costs

Brake lining Brembo Sinter 07BB2065 - rear wheel

original equipment flooring
Type 50, sintered metal
Design: Brake lining (disc brake)
Brake pad: Sintered metal OEM
width: 50,8 mm
height: 53,7 mm
thickness: 7,4 mm
With ABE
Suitable for the following motorcycles:
FAHRZEUGLISTE

RRP 47,20 Dollar
Only 37,76 Dollar

incl. 19% tax excl. Shipping costs

License plate and reflector mounting kit

Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts

9,44 Dollar

incl. 19% tax excl. Shipping costs

Plate Illumination EVOTECH with LED

EVOTECH LED license plate light with 4 mm thread
Cable length 30 cm

21,24 Dollar

incl. 19% tax excl. Shipping costs

Reinforced number plate made of DIBOND® material 180 x 200 mm

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.

15,34 Dollar

incl. 19% tax excl. Shipping costs

Spare spindle head for Evotech Performance axle protectors

Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.
Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm

9,44 Dollar

incl. 19% tax excl. Shipping costs

1 to 29 (from a total of 29)

Here you find noble accessories from Evotech Performance and Evotech SRL for your
Panigals V4 2018+, V4 S 2018+, V4 Speciale 2018+, V4 R 2019+, V4 S Corse 2019 +