MAIN PAGE » DUCATI » Ducati Panigale V2 ab 2020

Ducati Panigale V2 ab 2020

Here are noble accessories from EVOTECH PERFORMANCE for your Ducati Panigals V2 from 2020

Ducati Panigale V4 , R, S, S Corse from 2018, Streetfighter V2 from 2022 license plate holder from Evotech Performance

This license plate holder from EVOTECH PERFORMANCE for your DUCATI PANIGALE from 2018 and Streetfighter V2 from 2022 is CNC machined from lightweight aircraft aluminum.
Finished with a tough satin black powder coat.
Fits on:
Panigale V4 2018+, V4 S 2018+, V4 Speciale 2018+, V4 R 2019+, V4 S Corse 2019 +, V2 2020+.
Streetfighter V2 from 2022
The original turn signals and license plate lighting can still be used.
This license plate holder was developed especially for the existing holders on your DUCATI Panigale / Streefighter and does not require any changes on your motorcycle.
No changes to the wiring are necessary, just plug and play.
All necessary mountings are included in the delivery.
The licence plate angle is approx. 40 degrees. The reflector kit is included
An easy to understand illustrated manual is available here: INSTALLATION

348,30 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale V2 radiator guard from 2020 by Evotech Performance

The clever design of Evotech Performance allows the upper radiator guard to be mounted without dismantling the fairings.
The elegantly designed matrix is pierced with hexagonal holes to optimize airflow while providing maximum protection from road debris.
The Ducati Panigale's upper radiator guard features a remarkable strength-to-weight ratio and weighs 130 grams.
INSTALLATION

110,70 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale V2 radiator guard from 2020 by Evotech Performance - below

The clever design of Evotech Performance allows the lower radiator guard to be mounted without dismantling the fairings.
The elegantly designed matrix is pierced with hexagonal holes to optimize airflow while providing maximum protection from road debris.
Ducati Panigale's lower radiator grille features a remarkable strength-to-weight ratio and weighs 130 grams.
INSTALLATION

93,15 Dollar

incl. 19% tax excl. Shipping costs

Ducati rear wheel axle protection protector EVOTECH PERFORMANCE

The characteristics of the rear wheel axle protection for the Ducati
Fits the following Ducatis: All models

    Protects the swing arm and the sprocket
    Injection molded nylon coil with an aluminum carrier
    Stainless steel spindle rod with roller thread
    Red anodized hub stop for the outlet side
    Easy installation due to the rear wheel axle
    Spare coil heads can be purchased separately
INSTALLATION

79,65 Dollar

incl. 19% tax excl. Shipping costs

Ducati front wheel axle protection protector from Evotech Performance

Optimal protection for the fork in case of a slight fall or tipping over of the bike.
Good protection for expensive motorcycle parts. Mounting on the front wheel axle. 8mm rod with M8 thread.
Assembly time approx. 10min. per axle
Weight: 220 grams per axle
Fitting.....
INSTALLATION

62,10 Dollar

incl. 19% tax excl. Shipping costs

Garmin Navi mount on Evotech Performance bracket system

With this interface plate you can convert your Navi mount (from Evotech Performance) to the Garmin mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Compatible with all Zumo models.
Note: The Garmin Motorcycle Navi is not included.

40,50 Dollar

incl. 19% tax excl. Shipping costs

TomTom Navi mount on Evotech Performance bracket system

With this interface plate you can convert your Navi mount (from Evotech Performance) to the TomTom mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Note: The TomTom Motorcycle Navi is not included.

40,50 Dollar

incl. 19% tax excl. Shipping costs

Brake lining Brembo Sinter 07BB2065 - rear wheel

original equipment flooring
Type 50, sintered metal
Design: Brake lining (disc brake)
Brake pad: Sintered metal OEM
width: 50,8 mm
height: 53,7 mm
thickness: 7,4 mm
With ABE
Suitable for the following motorcycles:
FAHRZEUGLISTE

54,00 Dollar

incl. 19% tax excl. Shipping costs

License plate and reflector mounting kit

Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts

10,80 Dollar

incl. 19% tax excl. Shipping costs

Plate Illumination EVOTECH with LED

EVOTECH LED license plate light with 4 mm thread
Cable length 30 cm

24,30 Dollar

incl. 19% tax excl. Shipping costs

Reinforced number plate made of ALUCOBOND® material 180 x 200 mm

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light ALUCOBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.
The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
We stuck the number plate with mirror tape with 3 strips. Optically perfect and holds.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.

16,20 Dollar

incl. 19% tax excl. Shipping costs

Spare spindle head for Evotech Performance axle protectors

Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.
Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm

10,80 Dollar

incl. 19% tax excl. Shipping costs

1 to 12 (from a total of 12)

Here are noble accessories from EVOTECH PERFORMANCE for your Ducati Panigals V2 from 2020