MAIN PAGE » DUCATI » Ducati Panigale V2 ab 2020 » Ducati Panigale V2 radiator guard from 2020 by Evotech Performance

Ducati Panigale V2 radiator guard from 2020 by Evotech Performance

This radiator guard fits the following MODELS
The clever design of Evotech Performance allows the upper radiator guard to be mounted without dismantling the fairings.
The elegantly designed matrix is pierced with hexagonal holes to optimize airflow while providing maximum protection from road debris.
The Ducati Panigale's upper radiator guard features a remarkable strength-to-weight ratio and weighs 130 grams.
CNC machined from aircraft grade aluminium.
Black powder-coated for durability.
All necessary fittings are supplied with the kit.
Easy to understand illustrated instructions are available on the website.
INSTALLATION

Customer reviews (1)

Unfortunately there are no review yet. Be the first who rate this product.

Your opinion

Customers who bought this product bought also the following products:

Ducati Panigale V4 , R, S, S Corse from 2018, Streetfighter V2 from 2022 license plate holder from Evotech Performance

Ducati Panigale V4 , V2 from 2018, Streetfighter...

This license plate holder from EVOTECH PERFORMANCE for your DUCATI PANIGALE from 2018 and Streetfighter V2 from 2022 is CNC machined from lightweight aircraft aluminum.
Finished with a tough satin black powder coat.
Suitable for the following MODELS
The original turn signals and license plate lighting can still be used.
This license plate holder was developed especially for the existing holders on your DUCATI Panigale / Streefighter and does not require any changes on your motorcycle.
No changes to the wiring are necessary, just plug and play.
All necessary mountings are included in the delivery.
The licence plate angle is approx. 40 degrees. The reflector kit is included
If you need a reinforced noble number plate, look HERE
An easy to understand illustrated manual is available here: INSTALLATION

312,70 Dollar

Reinforced number plate made of DIBOND® material 180 x 200 mm

Reinforced number plate (D) 180 x 200 mm...

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm

The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.

The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.

15,34 Dollar