MAIN PAGE » DUCATI » Streetfighter V4

Streetfighter V4, V4S 2020+

Noble accessories for your Streetfighter V4, V4S 2020+ from Evotech Performance and Evotech SRL can be found here

Ducati Streetfighter V4 / V4 S from 2020 License plate holder from Evotech Performance

This license plate holder from EVOTECH PERFORMANCE for your Ducati Streetfighter V4 from 2020 onwards and is CNC milled from light aircraft aluminium.
With a robust, satin black powder coating.
Fitting: Ducati Streetfighter V4 / V4 S ab 2020
The original turn signals can still be used.
The LED number plate lighting is included in the scope of delivery.
This license plate holder was developed especially for the existing holders on your DUCATI Streefighter and does not require any changes on your bike.
No changes to the wiring are necessary, just plug and play.
All necessary mountings are included in the delivery.
Included Reflectorkit
If you need a reinforced noble number plate, look HERE
An easy to understand pictorial manual is available here:INSTALLATION

293,82 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V4 from 2020 licence plate holder by Evotech Italy

Ducati Streetfighter V4 / V4S from 2020 licence plate holder by Evotech Italy

Ducati Streetfighter V4 / V4S number plate holder from Evotech Italy.

The Evotech ITALY licence plate holders comply with the legal requirements, are adjustable in angle, extremely light, durable and with a revolutionary
revolutionary design.
The licence plate and all other aluminium parts are black anodised.
Solid support made of the special technopolymer material with anti-tuning system to reduce the continuous vibrations during driving.
Each KIT has special aluminium brackets depending on the model. Patented product.
The licence plate angle is 30 degrees.
Our kit here includes the complete number plate holder, LED number plate light and cable cover. An ABE is also included.
The reflector set is not included, but you can order it HERE if you need it.
We also offer a perfectly fitting number plate (also to improve the look) HERE.
The standard turn signals do not fit. Accessory turn signals with 8 mm connection must be used.

336,30 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter / Panigale V4 / V2 number plate holder from 2020 by EVOTECHPARTS

EVOTECHPARTS has co-developed a shorter number plate holder and had it made exclusively for us in this design.
Fits all Ducati Streetfighter and Panigale models with the V2 or V4 engine (from 2020).
MADE IN GERMANY
You can find a YOUTUBE video HERE
Material: Black matt anodised aluminium incl. E-approved number plate light and reflector.
Included are 2 brackets for the standard turn signals which can still be used. The licence plate is also included in the delivery.
The angle plate, which is locked into the motorbike mount, is made of steel (black powder-coated).
The angle is adjustable and has the required 30° as shown.
The distance between the turn signals and the end of the tyre also meets the legal requirements of 30 cm.
Thus "ALL SAFE".
If you still need an additional licence plate, we can recommend this one: LICENCE PLATE PLATE
Visually a very nice solution

253,70 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V4 / V4 S impact protection - crash protector Evotech Performance

Evotech Performance has designed and manufactured a crash protector for the Ducati Streetfighter V4 / V4S that is incredibly easy to fit.
Simply attach to the existing mounting points of your Ducati Streetfighter V4 / V4S.
No changes are necessary.
EVOTECHPARTS supplies all spare parts in case of a crash.
When it comes to crash protectors for the Ducati Streetfighter V4 / V4 S and if you want the best, you have found the best here.
INSTALLATION

280,84 Dollar

incl. 19% tax excl. Shipping costs

Reflector kit for Evotech Italy number plate holder

Reflector kit for Evotech Italy number plate holder
Suitable for licence plate holder from Evotech Italy
Scope of delivery: mounting bracket, screws, reflector

17,70 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale / Streetfighter V4 Radiator Guard Set 2018+ from Evotech Performance

This radiator guard from EVOTECH Performance fits exactly on the existing mounting points on your
Panigale V4 2018+, V4 S 2018+, V4 Speciale 2018+, V4 R 2019+, V4 S Corse 2019 +
Streetfighter V4 2020 +, V4 S 2020+
If you want to be sure if your model is included, have a look HERE
No changes are necessary when mounting the motorcycle.
INSTALLATION Panigale
INSTALLATION Streetfigher

165,20 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V4 Crash Protector Set from Evotech Italy

The new Evotech anti-shock crash pads have been designed and manufactured with the aim of absorbing the impact in the event of a fall. This means that the impact is absorbed by the slider and does not act directly on the frame.In the event of a fall, the slider is pressed onto a specially designed spacer with an increasing diameter. This causes the slider to deform, reducing the energy caused by the impact.
Tests conducted both under laboratory conditions and on the road showed a significant decrease in the load transferred to the frame compared to standard crash pads.
The slider of the crash pad is made of a plastic compound containing glass fibre.
It combines high shock absorption and abrasion resistance with low friction on the asphalt.We recommend a tightening torque of 90/95 Nm. Apply grease during fastening and if possible stabilise the motor with a lifting device.

112,10 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V4 fuel tank cover

This fuel tank pillion footrest cover from EVOTECH Performance fits exactly to the existing fixing points on your Ducati Streetfigher V4, from model 2020
No changes are necessary when mounting the motorcycle. The hexagonal hole pattern is designed to optimise airflow with maximum protection from road debris.
INSTALLATION

68,44 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V4 handlebar end weights from 2020 by Evotech Performance

Evotech Performance handlebar end weights are a direct replacement for your standard weights
They also provide increased protection to the end of the handlebars.
Precise CNC-milled from high-quality stainless steel.
Black powder-coated for durability.
Completed with the Evotech Performance logo for perfect aesthetics.
All necessary fixings are supplied with the kit.
Delivered is 1 pair.
Individual weight: 161 gram
Spare parts are available on request.
INSTALLATION

59,00 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V4 Oil Pan Protector by Evotech Performance

Ducati Streetfighter V4 Oil Pan Protector black anodised by Evotech Performance

Evotech Performance has designed and manufactured an oil pan protector for the Streetfighter V4.
The oil pan cover is designed to provide maximum protection from debris and stone chips to the lower case area of the V4 engine (with extended sides and curved underside). In the second picture you can see what stone chips the oil pan is exposed to.
This engine cover from Evotech Performance attaches to your motorbike's original mounting points.
No modifications to your motorbike are required.
CNC machined from high quality aircraft grade aluminium.
Anodised black for durability.
All necessary fixings are supplied with the kit.
Easy to follow illustrated instructions are available for download: INSTALLATION

108,56 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V4 Oil Pan Protector in Red anodised by Evotech Performance

Evotech Performance has designed and manufactured an oil pan protector for the Streetfighter V4.
The oil pan cover is designed to provide maximum protection from debris and stone chips to the lower case area of the V4 engine (with extended sides and curved underside). In the second picture you can see what stone chips the oil pan is exposed to.
This engine cover from Evotech Performance attaches to your motorbike's original mounting points.
No modifications to your motorbike are required.
CNC machined from high quality aircraft grade aluminium.
Anodised red for durability.
All necessary fixings are supplied with the kit.
Easy to follow illustrated instructions are available for download: INSTALLATION

108,56 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V4 Rear Cover (2020+) by Evotech Performance

Evotech Performance has designed and manufactured a rear cover for the Ducati Streetfighter V4 motorbikes.
Very quick to fit.
No modifications are required to your Ducati Streetfighter V4, V4S or V4 SP.
It is attached to the existing mounting points.
CNC machined from lightweight aircraft grade aluminium.
Powder coated black for durability.
All necessary mounting hardware is included in the kit.

RRP 64,90 Dollar
Only 55,16 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter/Panigale V4 Sprocket Carrier in Red by Evotech Italy

Ducati Streetfighter/Panigale V4 from 2020 Sprocket Carrier in Red by Evotech Italy

CNC machined from billet aluminium in Italy. Red anodised for durability.
The matching nut set can be used as an option. The standard nuts also fit.
Only the original chainring carrier is replaced.
The shock absorber is not changed.
The time required for the conversion is approx. 30 minutes.

171,10 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter/Panigale V4 from 2020 Sprocket carrier in black by Evotech Italy

CNC machined from billet aluminium in Italy. Black anodised for durability.
The matching nut set can be used as an option. The standard nuts also fit.
Only the original chainring carrier is replaced.
The shock absorber is not changed.
The time required for the conversion is approx. 30 minutes.

171,10 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V2 / V4 SP Connect kompatible Navi Halterung Evotech Performance - 56mm

Features of the Evotech Performance SP Connect compatible sat nav mount for the Ducati Streetfighter V4 and V2 from 2020 onwards.
The distance between the M8 screws is 56 mm centre to centre.

    Places a smartphone centrally in front of the rider
    Attaches via the handlebar clamp
    SP Connect mounting point already integrated in the EP mount
    All other mounting parts are included in the kit
    Adjustable horizontal pivot point for good visibility

What is a motorbike phone mount?

To access your smartphone while riding for applications such as audio and GPS, Evotech Performance has developed the SP Connect compatible navi mount. Made from lightweight aluminium and reinforced with EP's signature black powder coating, the mount can be attached to the handlebar clamp using the online step-by-step instructions.   With the SP Connect mounting point already attached, the rider can secure their smartphone in their chosen SP Connect smartphone case.
INSTALLATION

64,90 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V4 Oil Pan Protector bronze anodised by Evotech Performance

AVAILABLE FROM MID FEBRUARY
Evotech Performance has designed and manufactured an oil pan protector for the Streetfighter V4.
The oil pan cover is designed to provide maximum protection from debris and stone chips to the lower case area of the V4 engine (with extended sides and curved underside). In the second picture you can see what stone chips the oil pan is exposed to.
This engine cover from Evotech Performance attaches to your motorbike's original mounting points.
No modifications to your motorbike are required.
CNC machined from high quality aircraft grade aluminium.
Anodised bronze for durability.
All necessary fixings are supplied with the kit.
Easy to follow illustrated instructions are available for download: INSTALLATION

108,56 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V4 wingletset in black from Evotech Italy

Ducati Streetfighter V4 wingletset in black from Evotech Italy
incl. 8 matching aluminium screws

RRP 289,10 Dollar
Only 260,19 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V4 wingletset made of aluminium in RED by Evotech Italy

Ducati Streetfighter V4 wingletset made of aluminium in RED by Evotech Italy
incl. 8 matching aluminium screws

RRP 289,10 Dollar
Only 260,19 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale / Streetfighter V4 Alu nuts for chainring carrier - 6 pieces - BLACK

Alu nut M10x1.00 for chainring carrier Ducati Panigale / Streetfighter V4 etc.
The price is for 6 pieces. This is how many are needed for the chainring carrier
Tightening torque 45 Nm

35,40 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V2/V4 TomTom compatible handlebar clamp Navi mount from 2021 - 56mm

Features of the EP TomTom-compatible sat nav mount for the Ducati Streetfighter V2/V4
The distance between the M8 screws is 56 mm centre to centre.

    CNC machined aluminium mount to securely attach the TomTom system to the motorbike
    Attaches directly to the centre handlebar clamp with no modifications required
    Horizontal pivot point with easy to tighten thumbscrews
    Kit comes with all necessary mounting hardware
    Easy to install with our online step-by-step instructions found here INSTALLATION

64,90 Dollar

incl. 19% tax excl. Shipping costs

Handlebar end weights aluminium universal in red by Evotech Italy

Handlebar end weights milled from special aluminium. They have an innovative design down to the last detail. The mounting point corresponds to that of the original. For this reason, fitting is very easy and quick. The screws are made of light but high-strength duraluminium and anodised in the same colour as the bar end weights.
Including several adapters and bushings to be able to use an inner diameter of 12.5 to 16.5 mm.

35,40 Dollar

incl. 19% tax excl. Shipping costs

55 mm socket spanner / nut with 3/4 inch (20.0 mm) square socket

55 mm nut with hexagon inside - fits rear wheel of Panigale / Streetfighter V4
.. for hand-operated socket wrench inserts
.. CV steel
.. 20.0 mm (3/4") internal square
.. DIN 3123 / ISO 3316
.. Scope of delivery 1 nut
.. If your torque tool has a 1/2 inch (12.5 mm) connection, you will still need this ADAPTER.

28,32 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale / Streetfighter V4 Alu nuts for chainring carrier - 6 pieces - RED

Alu nut M10x1.00 for chainring carrier Ducati Panigale / Streetfighter V4 etc.
The price is for 6 pieces. This is how many are needed for the chainring carrier
Tightening torque 45 Nm

35,40 Dollar

incl. 19% tax excl. Shipping costs

KTM, Ducati, Husqvarna Brake and Clutch Lever Protector Kit from Evotech Performance

Evotech Performance has produced a brake and clutch lever protection kit for KTM, Ducati, Husqvarna... Husqvarna. Please check here if your bike is included: All MODELS.
The protectors are held in place with our unique machined cartridge expansion system.
CNC machined from aircraft grade aluminium and stainless steel.
No modifications are required to your bike.
Finished with a durable black powder coat for durability.
All fixings are supplied with the kit.

206,50 Dollar

incl. 19% tax excl. Shipping costs

Ducati M25x1.25 nut for front wheel axle RED by Evotech Italy

Ducati M 25 x 1.25 nut for front wheel axle in RED by Evotech Italy
Width across flats 30 mm
Material: AL 7075 T6
Normal tightening torque.

31,86 Dollar

incl. 19% tax excl. Shipping costs

Ducati M25x1.25 nut for front wheel axle Black by Evotech Italy

Ducati M25x1.25 nut for front wheel axle RED by Evotech Italy - Kopie

Ducati M 25 x 1.25 nut for front wheel axle in BLACK by Evotech Italy
Width across flats 30 mm
Material: AL 7075 T6
Normal tightening torque.

31,86 Dollar

incl. 19% tax excl. Shipping costs

Ducati rear wheel axle protection protector EVOTECH PERFORMANCE

The characteristics of the rear wheel axle protection for the Ducati
Fits the following Ducatis: All models

    Protects the swing arm and the sprocket
    Injection molded nylon coil with an aluminum carrier
    Stainless steel spindle rod with roller thread
    Red anodized hub stop for the outlet side
    Easy installation due to the rear wheel axle
    Spare coil heads can be purchased separately
INSTALLATION

69,62 Dollar

incl. 19% tax excl. Shipping costs

Ducati Panigale 1299/ 1199 und Streetfighter 1098/1198 chainring carrier - 6 Hole - Red

CNC machined from billet aluminium in Italy.
Red or black anodized for long durability.
Optionally the matching nut set can be used.
The standard nuts also fit.
Only the original chainring carrier will be replaced.
The shock absorber is not changed.
The time needed for the conversion takes about 30 minutes.
This chainring carrier fits:
Ducati Panigale 1299 / 1199 and Ducati Streetfighter 1098 / 1198 with 6 hole mount

RRP 182,90 Dollar
Only 141,60 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V4 Holder for Garmin Navigation by Evotech Performance

Ducati Streetfighter V2 / V4 Holder for Garmin Navigation by Evotech Performance - 56mm

Features of the Evotech Performance Garmin sat nav mount for the Ducati Streetfighter V2, V4 und V4 S.
The distance between the M8 screws is 56 mm centre to centre.

    Black powder coated aluminium mount with precision Garmin mounting point
    Adjustable horizontal pivot point for good visibility
    Attaches to handlebar clamp
    No modification to the motorbike required
    Installation instructions are available here: INSTALLATION

69,62 Dollar

incl. 19% tax excl. Shipping costs

Ducati front wheel axle protection protector from Evotech Performance

Optimal protection for the fork in case of a slight fall or tipping over of the bike.
Good protection for expensive motorcycle parts. Mounting on the front wheel axle. 8mm rod with M8 thread.
Assembly time approx. 10min. per axle
Weight: 220 grams per axle
Fitting.....
INSTALLATION

54,28 Dollar

incl. 19% tax excl. Shipping costs

Rear axle nut black duralumin for Ducati Streetfighter V4 by Evotech Italy

Ducati Streetfighter V4 Rear axle nut black duralumin by Evotech Italy

Very high quality duraluminium nut (7075T6) for the rear wheel of the Ducati Streetfighter V4 from 2020.
Machined on CNC-controlled machines, a great design and a refined look can be realised.
The 6 bulges and the 6 frontal holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The mounting is done with a standard ring spanner or nut.
Supplied with: 1 x rear axle nut with 55 mm spanner size.

55,46 Dollar

incl. 19% tax excl. Shipping costs

Rear axle nut redduralumin for Ducati Streetfighter V4 by Evotech Italy

Ducati Streetfighter V4 Rear axle nut RED duralumin by Evotech Italy

55,46 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V4 from 2021 Quad Lock compatible Navi Holder from Evotech Performance

Features of the Evotech Performance Quad Lock compatible nav mount
    Places your smartphone centrally in front of you
    Attaches via the handlebar clamp
    Quad Lock mounting point already integrated in the EP mount
    Compatible with all Quad Lock motorbike mounts and Quad Lock motorbike accessories
    All other mounting parts are included in the kit
    Adjustable horizontal pivot point for easy viewing

What is a motorbike phone / smartphone mount?
To access your smartphone while riding for applications such as audio and GPS, EP has developed the Quad Lock compatible sat nav mount. Made from lightweight aluminium and reinforced with EP's signature black powder coating, the mount can be attached to the handlebar clamp using this accessory's INSTALLATION s instructions.   With the Quad Lock mounting point already in place, riders can secure their smartphone in their chosen Quad Lock smartphone case.
Note: Quad Lock Interface Smartphone Case, connection cable and smartphone are not included.

79,06 Dollar

incl. 19% tax excl. Shipping costs

KTM 1290 / Ducati Streetfighter / Panigale hook spanner galvanised steel chain tensioner

You don't want to get out the toolbox and put together the rickety KTM tool every time you want to tighten your chain?
Then here is the right tool for you. Made of 4 mm galvanised steel with recessed grip and hole for hanging on the tool wall.

25,96 Dollar

incl. 19% tax excl. Shipping costs

Garmin Navi mount on Evotech Performance bracket system

With this interface plate you can convert your Navi mount (from Evotech Performance) to the Garmin mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Compatible with all Zumo models.
Note: The Garmin Motorcycle Navi is not included.

33,04 Dollar

incl. 19% tax excl. Shipping costs

SP Connect Navigation Interface Plate from Evotech Performance

This interface plate allows you to convert your Evotech Performance nav mount to the SP Connect mount system.
The mounts are machined from lightweight aluminium and feature EP's signature black powder coating.
The kit consists of:

    1 x interface plate
    1 x pivot plate
    Plus all necessary fixings

This item is only compatible with Evotech Performance pivot style sat nav mounts.
Note: Our mount works in conjunction with SP micro stem mount alu #53122 and anti-vibration module #53135.
SP Connect interface plate #53122, smartphone case, connection cable and smartphone are not included.

35,40 Dollar

incl. 19% tax excl. Shipping costs

Quad Lock Interface Plate Navi by Evotech Performance

The kit consists of:
    1 x Quad Lock bracket
    1 x interface plate
    1 x pivot plate
    Plus all necessary fixings

This item is only compatible with Evotech Performance pivot style sat nav mounts.
Note: Quad Lock interface smartphone case, connection cable, and smartphone are not included.

49,56 Dollar

incl. 19% tax excl. Shipping costs

Ultimate Addons Navigation Interface Plate from Evotech Performance

With our interface plate you can convert your Evotech Performance nav mount to the Ultimate Addons mount system.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary connections
This item is only compatible with Evotech Performance pivot style navi mounts.
Note: Smartphone, connection cable, Ultimateaddons 3-pin adapter plate and smartphone case are not included.

37,76 Dollar

incl. 19% tax excl. Shipping costs

Bremsbelag Brembo SA Sinter 07BB37SA - Front Site

Design: Brake lining (disc brake)
Brake lining: Sintered metal road
width: 102,2 mm
height: 42 mm
thickness: 7,7 mm
Suitable for the following motorcycles:
VEHICLE LIST

RRP 57,82 Dollar
Only 46,02 Dollar

incl. 19% tax excl. Shipping costs

Brake lining Brembo Sinter 07BB2065 - rear wheel

original equipment flooring
Type 50, sintered metal
Design: Brake lining (disc brake)
Brake pad: Sintered metal OEM
width: 50,8 mm
height: 53,7 mm
thickness: 7,4 mm
With ABE
Suitable for the following motorcycles:
FAHRZEUGLISTE

RRP 47,20 Dollar
Only 37,76 Dollar

incl. 19% tax excl. Shipping costs

License plate and reflector mounting kit

Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts

9,44 Dollar

incl. 19% tax excl. Shipping costs

Plate Illumination EVOTECH with LED

EVOTECH LED license plate light with 4 mm thread
Cable length 30 cm

21,24 Dollar

incl. 19% tax excl. Shipping costs

Reinforced number plate made of DIBOND® material 180 x 200 mm

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.

15,34 Dollar

incl. 19% tax excl. Shipping costs

Spare spindle head for Evotech Performance axle protectors

Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.
Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm

9,44 Dollar

incl. 19% tax excl. Shipping costs

Crash protector replacement 60 x 70 mm- Evotech Performance

REPLACEMENT CRASH PROTECTOR EVOTECH PERFORMANCE - 1 Pieces
60 mm x 70 mm

25,96 Dollar

incl. 19% tax excl. Shipping costs

Plastic wiring cover for Evotech Italy number plate holder.

Plastic wiring cover for Evotech Italy number plate holder.
Fits on the number plate holder from Evotech S.R.L.

15,34 Dollar

incl. 19% tax excl. Shipping costs

1 to 46 (from a total of 46)

Noble accessories for your Streetfighter V4, V4S 2020+ from Evotech Performance and Evotech SRL can be found here