HONDA

ACCESSORIES for your HONDA
License plate holder Honda CBR 1000 RR-R - ab 2020  from Evotech Performance
EVOTECH licence plate holder suitable for the following models:
Honda CBR 1000 RR-R from 2020
This short licence plate holder was specially developed by Evotech for your Honda CBR 1000 RR-R to make it look even better.
You can still use the standard turn signals.
The Honda does not need to be modified in any way. All fixings and are included.
Good value for money and a real eye-catcher - this is how your Honda CBR 1000 RR-R should look from 2020.
INSTALLATION
282,15 Dollar
incl. 19% tax excl. Shipping costs
Water & oil cooler protection Honda CBR 1000 RR-R / SP from 2020 Evotech Performance
Features of the Water Cooler Guard & Oil Cooler Guard Set for Honda CBR1000RR-R / SP

    Made from graduated 5000 grade aluminium
    High strength to weight ratio provides maximum protection at low weight
    Hexagonal EP matrix hole pattern provides maximum airflow
    No additional chassis modifications are required to ensure trouble-free installation
    The standard Honda oil cooler air deflector is retained
    Durable black powder coating provides a factory-like finish
    All necessary fasteners are included
INSTALLATION
175,50 Dollar
incl. 19% tax excl. Shipping costs
TomTom compatible handlebar clamp nav mount - Aprilia - Ducati - Honda
NEW
Features of the EP TomTom compatible nav mount for the Aprilia, Honda, Ducati. Suitable on the following MODELS
    Designed to fit perfectly with the TomTom mounting system
    Places a TomTom sat nav centrally in front of the rider
    Bracket is mounted on the handlebar clamp
    Adjustable horizontal pivot point for good visibility
    Fully compatible with TomTom anti-theft lock. Part no. 9uge.001.06
    Online step-by-step installation instructions is available here: INSTALLATION
 
What is a motorcycle navigation device mount?
Made of lightweight aluminum and reinforced with a black powder coat finish, the nav mount simply attaches to your existing handlebar clamp.   EP's mounting plate is designed to fit snugly on the TomTom mounting system, and all other necessary parts are included in the kit. It mounts centrally near the screen for easy access to the nav and other TomTom features while riding.
Note: TomTom motorcycle navi not included
74,25 Dollar
incl. 19% tax excl. Shipping costs
Bremsbelag Brembo SA Sinter 07BB37SA - Front Site
TOP
-8%
Design: Brake lining (disc brake)
Brake lining: Sintered metal road
width: 102,2 mm
height: 42 mm
thickness: 7,7 mm
Suitable for the following motorcycles:
VEHICLE LIST
RRP 66,15 Dollar
Only 60,75 Dollar
incl. 19% tax excl. Shipping costs
Brake lining Brembo Sinter 07BB2065 - rear wheel
original equipment flooring
Type 50, sintered metal
Design: Brake lining (disc brake)
Brake pad: Sintered metal OEM
width: 50,8 mm
height: 53,7 mm
thickness: 7,4 mm
With ABE
Suitable for the following motorcycles:
FAHRZEUGLISTE

 
54,00 Dollar
incl. 19% tax excl. Shipping costs
TomTom Navi mount on Evotech Performance bracket system
NEW
With this interface plate you can convert your Navi mount (from Evotech Performance) to the TomTom mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate  
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Note: The TomTom Motorcycle Navi is not included.
40,50 Dollar
incl. 19% tax excl. Shipping costs
Reinforced number plate made of ALUCOBOND® material 180 x 200 mm
Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light ALUCOBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.
The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
We stuck the number plate with mirror tape with 3 strips. Optically perfect and holds.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
16,20 Dollar
incl. 19% tax excl. Shipping costs
License plate and reflector mounting kit
Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts
10,80 Dollar
incl. 19% tax excl. Shipping costs
Spare spindle head for Evotech Performance axle protectors
Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.

Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm
10,80 Dollar
incl. 19% tax excl. Shipping costs
1 to 10 (from a total of 10)