MAIN PAGE » BMW » BMW R nine T

BMW R nine T

Exhaust bracket BMW R nineT from Evotech Performance from 2013

This exhaust bracket from Evotech Performance fits on your BMW R nineT from 2013 in Black
and when using the original exhaust system or in combination with various mufflers.
This bracket is preferably mounted when the standard footrests are no longer needed for the passenger or for solo operation.
All necessary screws and parts needed for a conversion are included.
Made from high strength aircraft aluminum. Anodized black matt for a very long life.
This holder fits: .........
INSTALLATION

127,05 Dollar

incl. 19% tax excl. Shipping costs

License plate holder BMW R nineT from Evotech Performance from 2013

This short number plate holder was specially developed by Evotech for your BMW R nineT from 2013 to make it look even better.
Fits for the following MODELS
The Evotech Performance licence plate holder is fully integrated into the sporty lines of your BMW R nineT from 2013 and is easy to fit with the original brackets.
The standard turn signals and number plate lighting can still be used.
The BMW does not need to be modified in any way. All mountings and are included in the scope of delivery incl. reflector kit.
CNC machined from lightweight aircraft quality aluminium.
The vacuum formed underbody is made from a special plastic to complete the look.
Good value for money and a real eye-catcher - this is how your BMW R nineT from 2013 should look.
This licence plate holder fits:
BMW R nineT 2013 - 2016
BMW R nineT from 2017
BMW R nineT Urban G/S from 2017
BMW R nineT Pure from 2017
BMW R nineT Racer/Scrambler from 2017
INSTALLATION

252,89 Dollar

incl. 19% tax excl. Shipping costs

Oil cooler protection BMW R nineT by Evotech Performance from 2013

Evotech's clever design means that oil cooler guards can be attached to the bike without modification.
The elegantly designed matrix is perforated with hexagonal holes to optimize airflow while providing maximum protection from road debris.
The BMW R nineT oil cooler guard features a remarkable strength-to-weight ratio and weighs approximately 140 grams.
Like only the best for your BMW, the radiator guard is CNC-machined from aircraft-grade aluminium.........
INSTALLATION

83,49 Dollar

incl. 19% tax excl. Shipping costs

Replacement rear light for Evotech Performance number plate holder

Replacement tail light for motorbikes
Our light is a brake and number plate light in one.
Screw spacing centre/centre 63 mm
The light is E-marked and fully homologated.
Spare part for BMW part number 63 21 7 711 000 and 63 21 8 551 834
This item fits in:
BMW G450X
BMW R NineT
BMW R NineT Pure
BMW R NineT Racer
BMW R NineT Urban G/S
BMW S 1000 XR licence plate holder PRN012717
BMW F 900 R / XR licence plate holder PRN015165
Ducati Diavel
General overview: Suitable for the following MODELS

119,79 Dollar

incl. 19% tax excl. Shipping costs

Engine protection BMW R-NineT from 2017 by Evotech Performance

Evotech Performance has designed and manufactured an engine protection for the BMW R-NineT from 2017.
CNC machined from aircraft grade (aluminium) with matt black coating for durability.
The unique design allows airflow through the engine guard.
This motor protection shield is supplied with all necessary fixing screws/parts and is easy to install.
INSTALLATION

216,59 Dollar

incl. 19% tax excl. Shipping costs

Reinforced number plate made of DIBOND® material 180 x 200 mm

Reinforced number plate (D) 180 x 200 mm made of DIBOND® material

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm

The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.

The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT

15,73 Dollar

incl. 19% tax excl. Shipping costs

BMW Swingarm Impact Protection from 2013 by Evotech Performance

Features of the Evotech Performance swingarm protector for the BMW R 1250, R nineT, R 1200 GS, R1200 RT, R1250 etc.
Here are all the MODELS on which this swingarm protector fits.

    Made of robust black nylon
    Attaches with the EP rubber expansion system for a secure fit
    Easy to fit
    Manufactured using Evotech performance quality and engineered materials
Scope of delivery: 1 piece

38,72 Dollar

incl. 19% tax excl. Shipping costs

TomTom compatible navigation holder for Yamaha, BMW, KTM by Evotech Performance - 88 mm

Description of the Evotech Performance TomTom compatible sat nav mount for the Yamaha, BMW and KTM.
You can find out which motorbike this mount fits here: All MODELS

    Designed to fit the TomTom mounting system perfectly
    Places a TomTom sat nav centrally in front of the rider
    Mounts to the handlebar clamp
    Adjustable horizontal pivot point for good visibility

    Fully compatible with the TomTom anti-theft lock. Part no. 9uge.001.06
    Installation instructions are available here: INSTALLATION

RRP 71,39 Dollar
Only 66,55 Dollar

incl. 19% tax excl. Shipping costs

Garmin compatible navigation holder for Yamaha, BMW, KTM by Evotech Performance - 88 mm Middle/Middle

Description of the Evotech Performance Garmin compatible sat nav mount for the Yamaha, BMW and KTM.
You can find out which motorbike this mount fits here: All MODELS
Here is a VIDEO about it

    Designed to fit the Garmin mounting system perfectly
    Places a Garmin sat nav centrally in front of the rider
    Mount attaches to the handlebar clamp
    Adjustable horizontal pivot point for good visibility
    Mounting instructions are available here: INSTALLATION

71,39 Dollar

incl. 19% tax excl. Shipping costs

Yamaha - BMW - KTM Quad Lock Compatible Navi Holder from Evotech Performance

The features of the Evotech Performance Quad Lock compatible nav mount for various Yamaha - BMW - KTM models.
On which motorcycles this holder fits exactly, you can find here: MODELS

    Places a smartphone centrally in front of the rider
    Is attached with the handlebar clamp
    Quad Lock mounting point already integrated in the Evotech Performance mount
    Compatible with all Quad Lock motorcycle mounts and Quad Lock motorcycle accessories
    All other mounting hardware is included in the kit
    Adjustable horizontal pivot point for easy viewing

87,12 Dollar

incl. 19% tax excl. Shipping costs

Garmin Navi mount on Evotech Performance bracket system

With this interface plate you can convert your Navi mount (from Evotech Performance) to the Garmin mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Compatible with all Zumo models.
Note: The Garmin Motorcycle Navi is not included.

38,72 Dollar

incl. 19% tax excl. Shipping costs

SP Connect Navigation Interface Plate from Evotech Performance

This interface plate allows you to convert your Evotech Performance nav mount to the SP Connect mount system.
The mounts are machined from lightweight aluminium and feature EP's signature black powder coating.
The kit consists of:

    1 x interface plate
    1 x pivot plate
    Plus all necessary fixings

This item is only compatible with Evotech Performance pivot style sat nav mounts.
Note: Our mount works in conjunction with SP micro stem mount alu #53122 and anti-vibration module #53135.
SP Connect interface plate #53122, smartphone case, connection cable and smartphone are not included.

38,72 Dollar

incl. 19% tax excl. Shipping costs

Quad Lock Interface Plate Navi by Evotech Performance

The kit consists of:
   1 x Quad Lock bracket
    1 x interface plate
    Plus all necessary fittings

This item is only compatible with Evotech Performance pivot style sat nav mounts.
Note: Quad Lock interface smartphone case, connection cable, and smartphone are not included.

38,72 Dollar

incl. 19% tax excl. Shipping costs

BMW / KTM / Yamaha - SP Connect Navigation Mount by Evotech Performance

SP Connect Navigation Mount BMW / KTM / Yamaha - by Evotech Performance - 88 mm

Features of the Evotech Performance SP Connect compatible sat nav mount for the BMW R NineT / KTM 1290 GT
Check if your bike is included at the following link: all MODELS
The distance between the M8 screws is 88 mm centre to centre
    Attaches directly to the centre handlebar clamp with no modifications required
    SP Connect mounting point fully integrated into the bracket
    Wing screws allow screen angle to be changed
    Bracket CNC machined from lightweight aluminium
    Black powder coated for durability
    You can find illustrated online installation instructions here under INSTALLATION

What do you need a motorbike phone mount for?

The Eotech Performance SP Connect-compatible sat nav mount for the BMW R NineT / KTM 1290 GT mounts over the centre handlebar clamp and is in the rider's field of vision for easy navigation while riding. The SP Connect interface allows quick and easy access to your smartphone, while the two-stage locking system secures your phone to the motorbike.   The easy-to-install smartphone GPS mount comes with all the necessary mounting hardware included in the kit.

Note: Our mount works in conjunction with the SP micro stem mount alu #53122 and the anti-vibration module #53135.
SP Connect interface plate #53122, smartphone case, connection cable and smartphone are not included.

71,39 Dollar

incl. 19% tax excl. Shipping costs

USB charger from Evotech Performance

The Evotech Performance Motorcycle USB Charger is a device that supplies power to electronic devices via a USB interface.
Extended range: The 2.2 metre long cable offers a long range so that you can conveniently install and mount the USB charger in different places on your motorbike. This flexibility ensures that the charger can be optimally positioned to be accessible while riding or parking.
Direct connection to the battery or ignition switch: Direct connection to the motorbike battery or ignition switch ensures a stable and reliable power source for the USB charger. However, we recommend connecting a fuse element in between. This direct wiring allows the charger to draw power directly from the motorbike's electrical system, ensuring a consistent and reliable power supply for chargers.
You can find an installation video HERE

35,09 Dollar

incl. 19% tax excl. Shipping costs

Quad Lock interface plate Navi from Evotech Performance

The kit consists of:
    1 x Quad Lock bracket
    1 x interface plate
    1 x pivot plate
    Plus all necessary fixings

This item is only compatible with Evotech Performance pivot style sat nav mounts.
Note: Quad Lock interface smartphone case, connection cable, and smartphone are not included.

53,24 Dollar

incl. 19% tax excl. Shipping costs

TomTom Navi mount on Evotech Performance bracket system

With this interface plate you can convert your Navi mount (from Evotech Performance) to the TomTom mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Note: The TomTom Motorcycle Navi is not included.

36,30 Dollar

incl. 19% tax excl. Shipping costs

SKYRICH Lithium-Ionen Batterie HJTX14H-FP-SI

SKYRICH Lithium-Ion Battery HJTX14H-FP-SI

SKYRICH lithium-ion battery (No shipping possible outside of Germany)
Weight: 0.92 kg including the plastic spacer (original battery: 4.7 kg) = 3.7 kg weight saved
Replaces the following lead-acid batteries: YTX14H-BS, YTX14-BS, HVT-8
We recommend checking the battery pole screws for tightness every six months and retightening them if necessary.
Maintenance-free, with pluggable spacers for height adjustment.
Powerful, safe, long service life......

107,69 Dollar

incl. 19% tax excl. Shipping costs

Brake caliper protection for Brembo brake calipers from Evotech Performance

Brake caliper protection for Brembo brake calipers black/red from Evotech Performance - Front

Evotech Performance has designed and manufactured a protection to protect your Brembo brake calipers.
These brake caliper protectors can be fitted to your motorcycle without any modifications.
CNC machined from aircraft grade aluminium.
Finished with a durable black powder coating.
All necessary fixings are supplied with the kit.
Delivered are 1 pair for 2 brake calipers
INSTALLATION
Suitable for the following motorcycles: HERE

53,24 Dollar

incl. 19% tax excl. Shipping costs

Brake caliper protection for Brembo brake calipers from Evotech Performance

Brake calliper protection from Evotech Performance - 1 pair
Suitable for the following MODELS

The front brake calliper protectors are supplied as a pair to protect both front disc brake callipers
CNC machined from aerospace grade aluminium
Powder-coated with Evotech's signature matt black finish for long-lasting durability
The model-specific design ensures an exact fit, it is not a universal motorbike brake caliper guard
Attaches to the existing mounting points with the original or Evotech brake caliper bolts
Quick and easy installation with the help of our user-friendly downloadable video instructions INSTALLATION

54,45 Dollar

incl. 19% tax excl. Shipping costs

Brake caliper protection for Brembo brake calipers from Evotech Performance

Brake calliper protection from Evotech Performance - 1 pair
Suitable for the following MODELS

The front brake calliper protectors are supplied as a pair to protect both front disc brake callipers
    CNC machined from aerospace grade aluminium
    Powder-coated with Evotech's signature matt black finish for long-lasting durability
    The model-specific design ensures an exact fit, it is not a universal motorbike brake caliper guard
    Attaches to the existing mounting points with the original or Evotech brake caliper bolts
    Quick and easy installation with the help of our user-friendly downloadable video instructions INSTALLATION

54,45 Dollar

incl. 19% tax excl. Shipping costs

License plate and reflector mounting kit

Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts

10,89 Dollar

incl. 19% tax excl. Shipping costs

Spare spindle head for Evotech Performance axle protectors

Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.
Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm

12,10 Dollar

incl. 19% tax excl. Shipping costs

1 to 23 (from a total of 23)