SPARE PARTS

Spare parts for your motorbike

If your desired spare parts are not listed here, you can look HERE

Air filter HIFLO HFA-6301 for KTM 1290 SuperDuke / R / GT / Adventure
-10%
Air filter HIFLO HFA-6301 for KTM 1290 SuperDuke / R / GT / Adventure
RRP 24,20 Dollar
Only 21,78 Dollar
incl. 19% tax excl. Shipping costs
Replacement rear light for Evotech Performance number plate holder
Replacement tail light for motorbikes
Our light is a brake and number plate light in one.
Screw spacing centre/centre 63 mm
The light is E-marked and fully homologated.
Spare part for BMW part number 63 21 7 711 000 and 63 21 8 551 834
This item fits in:
BMW G450X
BMW R NineT
BMW R NineT Pure
BMW R NineT Racer
BMW R NineT Urban G/S
BMW S 1000 XR licence plate holder PRN012717
BMW F 900 R / XR licence plate holder PRN015165
Ducati Diavel
General overview: Suitable for the following MODELS
119,79 Dollar
incl. 19% tax excl. Shipping costs
Reflector kit for Evotech Italy number plate holder
Reflector kit for Evotech Italy number plate holder
Suitable for licence plate holder from Evotech Italy
Scope of delivery: mounting bracket, screws, reflector
18,15 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 R from 2020 Spare Parts Crash Protector by Evotech Performance
Spare parts Crash Protector by Evotech Performance after a fall
to article number: PRN014848
1 x C M12 x 110 Caphead
1 x D Bobbin Spacer
1 x E Poly Washer
1 x F M12 Washer
1 x G Bobbin Head
81,07 Dollar
incl. 19% tax excl. Shipping costs
Rear wheel axle guard Ducati replacement head
Rear wheel axle guard Ducati replacement head
Suitable for the following MODELS
21,78 Dollar
incl. 19% tax excl. Shipping costs
Reinforced number plate made of DIBOND® material 180 x 140 mm
Are you looking for a stable and visually clean solution for mounting your Swiss or Lichtenstein licence plate?
We offer a 3 mm thick, 100 gram lightweight DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the licence plate.
The plate is matt black on one side and glossy black on the other.
The plate is supplied without holes.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE licence plate holders. If not, it is available
HERE.
14,52 Dollar
incl. 19% tax excl. Shipping costs
Reinforced licence plate 210 x 170 mm made of DIBOND® material (A)
Are you looking for a stable and visually clean solution for mounting your licence plate on your motorbike in Austria?
We offer a 3 mm thick, 100 gram lightweight DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the licence plate.
The plate is matt black on one side and glossy black on the other.
The plate is supplied without holes.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE licence plate holders. If not, it is available
HERE.
15,73 Dollar
incl. 19% tax excl. Shipping costs
Led number plate light for Evotech Italy number plate holder
Led number plate light for Evotech Italy number plate holder with E24 sign.
Cable length 42 cm.
Screw spacing: 30 mm
43,56 Dollar
incl. 19% tax excl. Shipping costs
GALFER brake pad set (2 pcs.) FD373 set G1370, sintered metal road.
GALFER brake pad set (2 pcs.) FD373 set G1370, sintered metal road.
In the opinion of the boss, who tested them on the 1290 Superduke, they are equivalent to the standard pads.
Design: Brake pad (disc brake)
Brake pad: Sintered metal
Width: 102.0 mm
Height: 41.9 mm
Thickness: 7.5 mm
Approval: ECE R90
Material: Steel
Colour: Brown

Suitable for the following MOTORCYCLES
35,09 Dollar
incl. 19% tax excl. Shipping costs
Evotech SP Connect sat nav interface plate
With this interface plate, you can convert your Evotech Performance sat nav mount to the SP Connect mount system.
The kit consists of:

    1 x interface plate
    Plus all necessary fixings

This item is only compatible with Evotech Performance pivot-style sat nav mounts.
21,78 Dollar
incl. 19% tax excl. Shipping costs
Garmin Navi mount on Evotech Performance bracket system
With this interface plate you can convert your Navi mount (from Evotech Performance) to the Garmin mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate  
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Compatible with all Zumo models.
Note: The Garmin Motorcycle Navi is not included.
38,72 Dollar
incl. 19% tax excl. Shipping costs
SP Connect Navigation Interface Plate from Evotech Performance
This interface plate allows you to convert your Evotech Performance nav mount to the SP Connect mount system.
The mounts are machined from lightweight aluminium and feature EP's signature black powder coating.
The kit consists of:

    1 x interface plate
    1 x pivot plate  
    Plus all necessary fixings

This item is only compatible with Evotech Performance pivot style sat nav mounts.
Note: Our mount works in conjunction with SP micro stem mount alu #53122 and anti-vibration module #53135.
SP Connect interface plate #53122, smartphone case, connection cable and smartphone are not included.
38,72 Dollar
incl. 19% tax excl. Shipping costs
Quad Lock Interface Plate Navi by Evotech Performance
The kit consists of:
   1 x Quad Lock bracket
    1 x interface plate  
    Plus all necessary fittings


This item is only compatible with Evotech Performance pivot style sat nav mounts.
Note: Quad Lock interface smartphone case, connection cable, and smartphone are not included.
38,72 Dollar
incl. 19% tax excl. Shipping costs
Quad Lock interface plate Navi from Evotech Performance
The kit consists of:
    1 x Quad Lock bracket
    1 x interface plate
    1 x pivot plate  
    Plus all necessary fixings

This item is only compatible with Evotech Performance pivot style sat nav mounts.
Note: Quad Lock interface smartphone case, connection cable, and smartphone are not included.
53,24 Dollar
incl. 19% tax excl. Shipping costs
Evotech Action / Dash Cam mounting kit
Features of the Action / Dash Cam compatible sat nav mount from Evotech Performance

    Places an Action / Dash Cam centrally in front of the rider
    Is attached with the handlebar clamp
    Action / Dash Cam mounting point already integrated into the EP mount
    Compatible with all motorbike mounts from Evotech Performance
    All necessary mounts are included in the kit
    Adjustable horizontal pivot point for easy adjustment
38,72 Dollar
incl. 19% tax excl. Shipping costs
TomTom Navi mount on Evotech Performance bracket system
With this interface plate you can convert your Navi mount (from Evotech Performance) to the TomTom mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate  
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Note: The TomTom Motorcycle Navi is not included.
36,30 Dollar
incl. 19% tax excl. Shipping costs
Action / Dash Cam Compatible Mount Evotech Performance
Universal mount - As a replacement part or to supplement an already mounted mount for navigation devices.
For placing the action / dash cam centrally in front of the driver.
Sold as shown
22,99 Dollar
incl. 19% tax excl. Shipping costs
Evotech Carpuride Interface Plate
With our interface plate, you can convert your Evotech Performance sat nav mount to the Carpuride mount system.
Compatible with all Carpuride motorbike mounts and Carpuride motorbike accessories

The kit consists of:
    1 x Carpuride mount
    1 x interface plate
    1 x pivot plate  
    Plus all necessary fixings
This item is only compatible with Evotech Performance pivot style sat nav mounts.
Note: Carpuride interface smartphone case, connection cable and smartphone are not included.
67,76 Dollar
incl. 19% tax excl. Shipping costs
Wing screw M5 x 16 mm 1 piece from EVOTECHPARTS
This wing screw is suitable for the navigation holders from Evotech Performance.
With thread M5 x 16 mm.
Scope of delivery 1 piece.
2,42 Dollar
incl. 19% tax excl. Shipping costs
Charging cable eyelet cable M6 / M8 with cap, SAE connection, 15 A fuse, length 50 cm
-13%
TECMATE accessories
Charging cable to charge the motorbike quickly and easily. The eyelets can be mounted on an M6 or M8 screw on the battery. This means you don't need to remove the battery cover every time.
For chargers OptiMATE 1, OptiMATE 2, OptiMATE 3, OptiMATE 4, OptiMATE 5, OptiMATE 6, OptiMATE 7, OptiMATE DC-DC, OptiMATE Lithium, Accu Mate, Accu Gard.
Eyelet cable M6/M8 with cap, SAE connection, 15 A fuse, length 50cm, retail packaging.
Ideal if you have several motorbikes or other vehicles but only one charger.
RRP 18,15 Dollar
Only 15,73 Dollar
incl. 19% tax excl. Shipping costs
TECMATE
-6%
TECMATE "OptiMATE1 DUO" battery charger
Charging current 0.6A, suitable for standard, AGM, gel and lithium batteries (LiFePO4 / LFP), battery capacity 2Ah - 30Ah, automatic switch-off, fresh-keeping function
4-stage charger and battery maintenance unit, charges and maintains all vehicle batteries without any settings on the unit. With three indicator lights to show the charging process. ...
RRP 54,45 Dollar
Only 50,82 Dollar
incl. 19% tax excl. Shipping costs
Bremsbelag Brembo SA Sinter 07BB37SA
-23%
Design: Brake lining (disc brake)
Brake lining: Sintered metal road
width: 102,2 mm
height: 42 mm
thickness: 7,7 mm
Suitable for the following motorcycles:
VEHICLE LIST

If you want to install cheaper, but equally good, biting pads, take a look here: GALFER
RRP 71,39 Dollar
Only 54,45 Dollar
incl. 19% tax excl. Shipping costs
Brake lining Brembo SA Sinter 07BB2065
original equipment flooring
Type 50, sintered metal
Design: Brake lining (disc brake)
Brake pad: Sintered metal OEM
width: 50,8 mm
height: 53,7 mm
thickness: 7,4 mm
With ABE
Suitable for the following motorcycles:
FAHRZEUGLISTE

 
48,40 Dollar
incl. 19% tax excl. Shipping costs
License plate and reflector mounting kit
Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts
10,89 Dollar
incl. 19% tax excl. Shipping costs
EVOTECH Performance LED number plate illumination
EVOTECH Performance LED licence plate light with 4 mm threaded hole
Hole spacing 32 mm
total width: 52 mm
Cable length 78 cm

 
21,78 Dollar
incl. 19% tax excl. Shipping costs
evotech-led-plate illumination
EVOTECH LED license plate light with 4 mm thread
Cable length 30 cm
21,78 Dollar
incl. 19% tax excl. Shipping costs
B&M reflector with self-adhesive film in red 89 x 13 mm E tested
SHIN YO reflector with self-adhesive film in red 123 x 12 mm
7,26 Dollar
incl. 19% tax excl. Shipping costs
Spare spindle head for Evotech Performance axle protectors
Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.
Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here is a part of it as a replacement part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.
Diameter: 60mm
Total height: 33mm
Inner diameter: 37/20 mm
Weight: 115 gram

1 piece is supplied.
Suitable for this
MODEL among others
21,78 Dollar
incl. 19% tax excl. Shipping costs
Spare spindle head for Evotech Performance axle protectors
Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.

Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm
12,10 Dollar
incl. 19% tax excl. Shipping costs
Ersatz Crash Protektor Evotech
REPLACEMENT CRASH PROTECTOR  EVOTECH PERFORMANCE - 1 Pieces
60 mm x 70 mm
26,62 Dollar
incl. 19% tax excl. Shipping costs
Ersatz Crash Protektor Evotech
SPARE CRASH PROTEKTOR spare part - EVOTECH PERFORMANCE
50 x 56 mm
delivery : 1 piece
18,15 Dollar
incl. 19% tax excl. Shipping costs
Mounting kit for pivot joint - Pivotplate
With this interface plate, you can convert your Evotech Performance sat nav mount to another system in a matter of seconds.
The kit consists of:
18,15 Dollar
incl. 19% tax excl. Shipping costs
1 to 40 (from a total of 40)

Spare parts for your motorbike

If your desired spare parts are not listed here, you can look HERE