Z1000 / Versys/ 750 / 800

Kawasaki Z1000 / Versys/ 750 / 800

Tail Tidy Kawasaki Z 1000 up 2014 from Evotech
Tail Tidy Kawasaki Z 1000 up 2014 from Evotech
for the following models:
Kawasaki Z 1000 from 2014 onwards
Kawasaki Z 1000 R Edition as of 2018
Kawasaki Z 1000 R Edition Performance as of 2018
This short license plate holder was developed by Evotech especially for your Kawasaki Z 1000 to make it look even better.
INSTALLATION
112,50 Dollar
incl. 19% tax excl. Shipping costs
KAWASAKI Z1000 / Versys/ 750 / 800 Radiator protection from 2007 from Evotech Performance
Kawasaki Z1000 / Versys/ 750 / 800 Radiator protection from 2007 from Evotech Performance
This radiator guard fits exactly on the existing fixing points on your Kawasaki.
suitable for the following models:
Z 1000 from year of construction 2007
Z 1000 SX from year of construction 2010
VERSYS 1000 from 2012 onwards
Z 750 Year of construction 2007 to 2012
Z 800 Year of construction 2013 to 2018 +..
Here you will find all motorbikes on which this radiator guard fits: All MODELS
INSTALLATION
100,00 Dollar
incl. 19% tax excl. Shipping costs
Reinforced number plate made of DIBOND® material 180 x 200 mm
Reinforced number plate (D) 180 x 200 mm made of DIBOND® material

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm

The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.

The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT
16,25 Dollar
incl. 19% tax excl. Shipping costs
Quad Lock compatible nav mount from Evotech Performance
Quad Lock compatible nav mount from Evotech Performance
Features of the Evotech Performance Quad Lock compatible sat nav mount for your BMW, Suzuki, Kawasaki, Honda.
You can find your motorbike here under MODELS

    Places your smartphone centrally in front of you
    Attaches via the handlebar clamp
    Quad Lock mounting point already integrated in the EP mount
    Compatible with all Quad Lock motorbike mounts and Quad Lock motorbike accessories
    All other mounting parts are included in the kit
    Adjustable horizontal pivot point for easy viewing
 
 INSTALLATION
90,00 Dollar
incl. 19% tax excl. Shipping costs
USB charger from Evotech Performance
USB A charger from Evotech Performance
The Evotech Performance Motorcycle USB Charger is a device that supplies power to electronic devices via a USB interface.
This article is equipped with USB A connection. With USB C connection you can find HERE
Extended range: The 2.2 metre long cable offers a long range so that you can conveniently install and mount the USB charger in different places on your motorbike. This flexibility ensures that the charger can be optimally positioned to be accessible while riding or parking.
Direct connection to the battery or ignition switch: Direct connection to the motorbike battery or ignition switch ensures a stable and reliable power source for the USB charger. However, we recommend connecting a fuse element in between. This direct wiring allows the charger to draw power directly from the motorbike's electrical system, ensuring a consistent and reliable power supply for chargers.
You can find an installation video HERE
40,00 Dollar
incl. 19% tax excl. Shipping costs
Brake lining Brembo SA Sinter 07BB2065
Brake lining Brembo Sinter 07BB2065 - rear wheel
original equipment flooring
Type 50, sintered metal
Design: Brake lining (disc brake)
Brake pad: Sintered metal OEM
width: 50,8 mm
height: 53,7 mm
thickness: 7,4 mm
With ABE
Suitable for the following motorcycles:
FAHRZEUGLISTE
 
50,00 Dollar
incl. 19% tax excl. Shipping costs
License plate and reflector mounting kit
License plate and reflector mounting kit
Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts
15,00 Dollar
incl. 19% tax excl. Shipping costs
Spare spindle head for Evotech Performance axle protectors
Spare spindle head for Evotech Performance axle protectors
Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.
Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm
12,50 Dollar
incl. 19% tax excl. Shipping costs
1 to 8 (from a total of 8)