Tail Tidy Kawasaki Z 1000 up 2014 from Evotech
for the following models:
Kawasaki Z 1000 from 2014 onwards
Kawasaki Z 1000 R Edition as of 2018
Kawasaki Z 1000 R Edition Performance as of 2018
This short license plate holder was developed by Evotech especially for your Kawasaki Z 1000 to make it look even better.
The Evotech Performance license plate holder is fully integrated into the sporty lines of your Kawasaki Z 1000 and is easy to mount using the original brackets.
Evotech has replaced the license plate light with a new LED light that better matches the unique design.
The standard indicators can still be used.
The Kawasaki Z 1000 does not need to be modified in any way. All attachments are included.
A good price-performance ratio and a real eye-catcher - that's what your Kawasaki Z 1000 should look like.
INSTALLATION
Kawasaki Z 1000 from 2014 onwards
Kawasaki Z 1000 R Edition as of 2018
Kawasaki Z 1000 R Edition Performance as of 2018
This short license plate holder was developed by Evotech especially for your Kawasaki Z 1000 to make it look even better.
The Evotech Performance license plate holder is fully integrated into the sporty lines of your Kawasaki Z 1000 and is easy to mount using the original brackets.
Evotech has replaced the license plate light with a new LED light that better matches the unique design.
The standard indicators can still be used.
The Kawasaki Z 1000 does not need to be modified in any way. All attachments are included.
A good price-performance ratio and a real eye-catcher - that's what your Kawasaki Z 1000 should look like.
INSTALLATION
- Manufacturer:
Evotech Performance
8 Beechings Way, Alford, Lincolnshire, LN13 9JE
Tel. 01507 464125
Dan Rack dan @ drury-precision.co.uk
Importer / first distributor:
EVOTECH GERMANY
Lothar Westphal
Eichendorffstr. 9
78239 Rielasingen
Tel.07731 8229019
mail @ evotechparts.com
General safety instructions for the product:
We recommend that you always consult a specialist workshop when installing our products or have this work carried out by a specialist. If you fit it yourself, please make sure that your motorbike is secure and that the product is only intended for your motorbike. The models for which the product is tested and intended can be found with each item.
To avoid damage to your motorbike during installation, we recommend covering all important/sensitive parts.
When fitting, use threadlocker if possible and observe the torque specifications. The fixing screws on the licence plate holder in particular should be secured with threadlocker. Loss of the licence plate holder due to lost screws can cause unpleasant damage.
General torque specifications can be found HERE
Licence plate holders from Great Britain do not have an ABE. The licence plate lighting has an E approval mark. The indicator spacing is 180 mm. Suitable adapters are usually included to bring the indicator spacing to the legally required 180 mm.
The legally required licence plate angle of 30 degrees cannot be complied with on all British licence plate holders, as they are mounted much further in the direction of travel and may come into contact with the tyre at 30 degrees.
The angle of 30 degrees must be checked and adjusted on the vehicle. Take the suspension travel of the motorbike into account. If space is tight, we recommend fitting the narrower version of the rear reflector.
Unfortunately there are no reviews yet. Be the first who rates this product.
You must be logged in to submit a review. Login