MAIN PAGE » KTM » KTM 1290 » MAINTENANCE / Spare Parts

MAINTENANCE / Spare Parts

Here you can find accessories and spare parts for your KTM 1290 up 2014 + like oil filters, air filters, chain sets, brake pads,

Locking plate for sprocket KTM 1290

4,24 Dollar

incl. 19% tax excl. Shipping costs

KTM 1290 hexagon nut M20 x 1,5 for front sprocket

KTM 1290 hexagon nut M20 x 1,5 for front sprocket - wrench size 32mm - Made in DE
Assembly tip: Tightening torque: 100 Nm and secured with Loctite ® 243
Scope of delivery: 1 piece

24,20 Dollar

incl. 19% tax excl. Shipping costs

Oil filter HIFLO HF650 for KTM 1290 R / GT / Adventure

Replacement oil filter HIFLO HF650 for KTM 1290 R / GT / Adventure. Best quality at a reasonable price. For those who change the oil themselves. Nothing simpler than this

8,47 Dollar

incl. 19% tax excl. Shipping costs

Air filter HIFLO HFA-6301 for KTM 1290 SuperDuke / R / GT / Adventure

RRP 24,20 Dollar
Only 21,78 Dollar

incl. 19% tax excl. Shipping costs

KTM 1290 R from 2020 Spare Parts Crash Protector by Evotech Performance

Spare parts Crash Protector by Evotech Performance after a fall
to article number: PRN014848
1 x C M12 x 110 Caphead
1 x D Bobbin Spacer
1 x E Poly Washer
1 x F M12 Washer
1 x G Bobbin Head

81,07 Dollar

incl. 19% tax excl. Shipping costs

Reinforced number plate made of DIBOND® material 180 x 200 mm

Reinforced number plate (D) 180 x 200 mm made of DIBOND® material

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm

The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.

The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT

15,73 Dollar

incl. 19% tax excl. Shipping costs

Indicator adapter set for Evotech Performance number plate holder KTM

Indicator adapter set for Evotech Performance number plate holder KTM
18 mm high.
Stainless steel sleeve with M10 thread
Supplied as shown

35,09 Dollar

incl. 19% tax excl. Shipping costs

Reinforced number plate made of DIBOND® material 180 x 140 mm

Reinforced number plate (CH+LI) 180 x 140 mm made of DIBOND® material

Are you looking for a stable and visually clean solution for mounting your Swiss or Lichtenstein licence plate?
We offer a 3 mm thick, 100 gram lightweight DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the licence plate.
The plate is matt black on one side and glossy black on the other.
The plate is supplied without holes.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE licence plate holders. If not, it is available HERE.

14,52 Dollar

incl. 19% tax excl. Shipping costs

GALFER brake pad set (2 pcs.) FD373 set G1370, sintered metal road.

GALFER brake pad set (2 pcs.) FD373 set G1370, sintered metal road.
In the opinion of the boss, who tested them on the 1290 Superduke, they are equivalent to the standard pads.
Design: Brake pad (disc brake)
Brake pad: Sintered metal
Width: 102.0 mm
Height: 41.9 mm
Thickness: 7.5 mm
Approval: ECE R90
Material: Steel
Colour: Brown

Suitable for the following MOTORCYCLES

35,09 Dollar

incl. 19% tax excl. Shipping costs

Hook spanner galvanised steel chain tensioner

Tired of getting out the tool kit and putting the tools together every time you want to tighten your chain?
Then this is the right tool for you. Made of 4 mm galvanised steel with a hole for hanging on the tool wall.

26,62 Dollar

incl. 19% tax excl. Shipping costs

KETTEN KIT DID 525 ZVMX Silent for KTM 1290 Superduke / GT from 2014

D.I.D chain set for the KTM 1290 SuperDuke R or GT from 2014 onwards
Translation: 17-38-112/525
Sprocket: steel, noise reduced, chain wheel: steel

DID Standard, 525ZVM-X(G&G), X-Ring
Quality: Standard
Features: noise reduced
Chain pitch: 525
Type: ZVMX
Number of chain links: 112
Design: X-Ring
Number of teeth Pinion: 17
Number of teeth sprocket: 38
Material: steel
Colour: gold

RRP 240,79 Dollar
Only 222,64 Dollar

incl. 19% tax excl. Shipping costs

Garmin Navi mount on Evotech Performance bracket system

With this interface plate you can convert your Navi mount (from Evotech Performance) to the Garmin mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Compatible with all Zumo models.
Note: The Garmin Motorcycle Navi is not included.

38,72 Dollar

incl. 19% tax excl. Shipping costs

SP Connect Navigation Interface Plate from Evotech Performance

This interface plate allows you to convert your Evotech Performance nav mount to the SP Connect mount system.
The mounts are machined from lightweight aluminium and feature EP's signature black powder coating.
The kit consists of:

    1 x interface plate
    1 x pivot plate
    Plus all necessary fixings

This item is only compatible with Evotech Performance pivot style sat nav mounts.
Note: Our mount works in conjunction with SP micro stem mount alu #53122 and anti-vibration module #53135.
SP Connect interface plate #53122, smartphone case, connection cable and smartphone are not included.

38,72 Dollar

incl. 19% tax excl. Shipping costs

USB charger from Evotech Performance

The Evotech Performance Motorcycle USB Charger is a device that supplies power to electronic devices via a USB interface.
Extended range: The 2.2 metre long cable offers a long range so that you can conveniently install and mount the USB charger in different places on your motorbike. This flexibility ensures that the charger can be optimally positioned to be accessible while riding or parking.
Direct connection to the battery or ignition switch: Direct connection to the motorbike battery or ignition switch ensures a stable and reliable power source for the USB charger. However, we recommend connecting a fuse element in between. This direct wiring allows the charger to draw power directly from the motorbike's electrical system, ensuring a consistent and reliable power supply for chargers.
You can find an installation video HERE

35,09 Dollar

incl. 19% tax excl. Shipping costs

TomTom Navi mount on Evotech Performance bracket system

With this interface plate you can convert your Navi mount (from Evotech Performance) to the TomTom mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Note: The TomTom Motorcycle Navi is not included.

36,30 Dollar

incl. 19% tax excl. Shipping costs

SKYRICH Lithium-Ionen Batterie HJTX14H-FP-SI

SKYRICH Lithium-Ion Battery HJTX14H-FP-SI

SKYRICH lithium-ion battery (No shipping possible outside of Germany)
Weight: 0.92 kg including the plastic spacer (original battery: 4.7 kg) = 3.7 kg weight saved
Replaces the following lead-acid batteries: YTX14H-BS, YTX14-BS, HVT-8
We recommend checking the battery pole screws for tightness every six months and retightening them if necessary.
Maintenance-free, with pluggable spacers for height adjustment.
Powerful, safe, long service life......

107,69 Dollar

incl. 19% tax excl. Shipping costs

Charging cable eyelet cable M6 / M8 with cap, SAE connection, 15 A fuse, length 50 cm

TECMATE accessories
Charging cable to charge the motorbike quickly and easily. The eyelets can be mounted on an M6 or M8 screw on the battery. This means you don't need to remove the battery cover every time.
For chargers OptiMATE 1, OptiMATE 2, OptiMATE 3, OptiMATE 4, OptiMATE 5, OptiMATE 6, OptiMATE 7, OptiMATE DC-DC, OptiMATE Lithium, Accu Mate, Accu Gard.
Eyelet cable M6/M8 with cap, SAE connection, 15 A fuse, length 50cm, retail packaging.
Ideal if you have several motorbikes or other vehicles but only one charger.

RRP 18,15 Dollar
Only 15,73 Dollar

incl. 19% tax excl. Shipping costs

TECMATE "OptiMATE1 DUO" battery charger

TECMATE "OptiMATE1 DUO" battery charger
Charging current 0.6A, suitable for standard, AGM, gel and lithium batteries (LiFePO4 / LFP), battery capacity 2Ah - 30Ah, automatic switch-off, fresh-keeping function
4-stage charger and battery maintenance unit, charges and maintains all vehicle batteries without any settings on the unit. With three indicator lights to show the charging process. ...

RRP 54,45 Dollar
Only 50,82 Dollar

incl. 19% tax excl. Shipping costs

Bremsbelag Brembo SA Sinter 07BB37SA - Front Site

Design: Brake lining (disc brake)
Brake lining: Sintered metal road
width: 102,2 mm
height: 42 mm
thickness: 7,7 mm
Suitable for the following motorcycles:
VEHICLE LIST
If you want to install cheaper, but equally good, biting pads, take a look here: GALFER

RRP 71,39 Dollar
Only 54,45 Dollar

incl. 19% tax excl. Shipping costs

Brake lining Brembo Sinter 07BB2065 - rear wheel

original equipment flooring
Type 50, sintered metal
Design: Brake lining (disc brake)
Brake pad: Sintered metal OEM
width: 50,8 mm
height: 53,7 mm
thickness: 7,4 mm
With ABE
Suitable for the following motorcycles:
FAHRZEUGLISTE

48,40 Dollar

incl. 19% tax excl. Shipping costs

License plate and reflector mounting kit

Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts

10,89 Dollar

incl. 19% tax excl. Shipping costs

Plate Illumination EVOTECH with LED

EVOTECH LED license plate light with 4 mm thread
Cable length 30 cm

21,78 Dollar

incl. 19% tax excl. Shipping costs

Spare spindle head for Evotech Performance axle protectors - small

Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.
Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here is a part of it as a replacement part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.
Diameter: 60mm
Total height: 33mm
Inner diameter: 37/20 mm
Weight: 115 gram
1 piece is supplied.
Suitable for this MODEL among others