1290 R 2017-19

Here you can find noble accessories from EVOTECH PERFORMANCE for your KTM 1290 R from 2017 to 2019
Here you can find noble accessories from EVOTECH PERFORMANCE for your KTM 1290 R from 2017 to 2019
KTM 1290 Super Duke R license plate holder - 2019 by EVOTECH PERFORMANCE
Evotech Performance has designed and manufactured this KTM Superduke license plate holder.
Machined from billet aluminum and coated matte black.
The original license plate light (not included) is retained.
Plug and play only so no additional wiring is required.
Please note that after installation a case system may not fit.
Fits only on the 1290 Super Duke R and SE through 2019.
INSTALLATION
211,75 Dollar
incl. 19% tax excl. Shipping costs
License plate holder KTM 1290 SuperDuke R / SE 2014- 2019 from Progress Line
The license plate holder convinces with a long service life and very good weather resistance.
black powder-coated
the licence plate holder is suitable for every type of licence plate (width 175 mm)
  • no fairing parts have to be changed
  • Inclination angle can be adjusted without gaps
  • Blinker holders are adjustable in 3 positions and correspond to the distance according to StvO....
107,69 Dollar
incl. 19% tax excl. Shipping costs
Handlebar end mirrors from Evotech Performance
Main features of the Evotech handlebar end mirrors:
Suitable for the following MODELS
You can find an installation video here: INSTALLATION

    Modernised design of the classic ‘round’ handlebar end mirror
    The mirror can be swivelled backwards for optimum visibility
    Convex shape of the mirror glass for 2x magnification
    Aluminium mirror shaft is adjustable in position
    Internal collet mounting mechanism is model-specific, not universally applicable
    High-quality, injection-moulded nylon mirror housing with Evotech performance logos
Scope of delivery: 1 pair
    Glass diameter: 85 mm with an area of 56.72 cm² (not permitted in many countries)

 
344,85 Dollar
incl. 19% tax excl. Shipping costs
Motor protection for KTM 1290 SDR from 2014 from EVOTECH PERFORMANCE
Evotech Performance has designed and manufactured a motor protection for the KTM 1290 R (2014-2019) Superduke
INSTALLATION

YOUTUBE Video


 
145,20 Dollar
incl. 19% tax excl. Shipping costs
SP Connect compatible navi mount KTM - by Evotech Performance
Features of the Evotech Performance SP Connect compatible sat nav mount for the BMW R NineT / KTM 1290 GT
Check if your bike is included at the following link: all MODELS

    Attaches directly to the centre handlebar clamp with no modifications required
    SP Connect mounting point fully integrated into the bracket
    Wing screws allow screen angle to be changed
    Bracket CNC machined from lightweight aluminium
    Black powder coated for durability
    You can find illustrated online installation instructions here under INSTALLATION
71,39 Dollar
incl. 19% tax excl. Shipping costs
KTM, Ducati, Husqvarna Brake and Clutch Lever Protector Kit from Evotech Performance
Evotech Performance has produced a brake and clutch lever protection kit for KTM, Ducati, Husqvarna... Husqvarna. Please check here if your bike is included: All MODELS.
The protectors are held in place with our unique machined cartridge expansion system.
CNC machined from aircraft grade aluminium and stainless steel.
No modifications are required to your bike.
Finished with a durable black powder coat for durability.
All fixings are supplied with the kit.


 
223,85 Dollar
incl. 19% tax excl. Shipping costs
Handlebar end weights from Evotech Performance for KTM, Ducati, Husqvarna
Features of the Evotech Performance handlebar end weights (Touring) for various Ducati , KTM, Husqvarna Models.
Suitable for the following MODELS

    Direct replacement for original left and right handlebar weights
    CNC-machined from stainless steel, including all necessary fastening elements
    Unique EP mounting design for easy but very secure installation
    EP's Touring Option, the higher handlebar end weight offered by Evotech Performance
    Additional weight supports the reduction of high-frequency vibrations
    Discreet, elegant design with EP logos and aesthetics
95,59 Dollar
incl. 19% tax excl. Shipping costs
KTM, Ducati, Husqvarna handlebar end weights ROAD from Evotech Performance
Features of the Evotech Performance handlebar end weights (ROAD) for various Ducati , KTM, Husqvarna Models.
Suitable for the following MODELS

    Direct replacement for original left and right handlebar weights
    CNC-machined from stainless steel, including all necessary fastening elements
    Unique EP mounting design for a simple but very secure installation
    EP's Touring Option, the higher handlebar end weight offered by Evotech Performance
    Additional weight supports the reduction of high-frequency vibrations
    Discreet, elegant design with EP logos and aesthetics
101,64 Dollar
incl. 19% tax excl. Shipping costs
Indicator adapter set for Evotech Performance number plate holder
Indicator adapter set for Evotech Performance number plate holder KTM
18 mm high.
Stainless steel sleeve with M10 thread
Supplied as shown
35,09 Dollar
incl. 19% tax excl. Shipping costs
Led number plate light for Evotech Italy number plate holder
Led number plate light for Evotech Italy number plate holder with E24 sign.
Cable length 42 cm.
Screw spacing: 30 mm
43,56 Dollar
incl. 19% tax excl. Shipping costs
Clutch Release / Pressure Plate Black KTM 1290 SDR/GT LC8 Engine
Clutch Release / Pressure Plate Black KTM 1290/1390 SDR/GT LC8 Engine
43,56 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290/1390 clutch release - black - New Design
KTM 1290/1390 clutch release - black - New Design
54,45 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290/1390 clutch release - orange - New Design
KTM 1290/1390 clutch release - orange - New Design
54,45 Dollar
incl. 19% tax excl. Shipping costs
KTM - TomTom compatible navi mount by Evotech Performance - 88 mmm
Features of the TomTom compatible nav mount from Evotech Performance.

    Designed to fit perfectly with the TomTom mounting system
    Places a TomTom sat nav centrally in front of the rider
    Mount attaches to the handlebar clamp
    Adjustable horizontal pivot point for good visibility
    Fully compatible with TomTom anti-theft lock. Part No. 9uge.001.06

Note: TomTom motorcycle navi not included.
How the part is mounted, you see in the INSTALLATION s instructions
71,39 Dollar
incl. 19% tax excl. Shipping costs
Formring clutch cover KTM LC8 1290ccm SuperDuke or GT
Formring clutch cover KTM LC8 KTM LC8 1290 / 1390 ccm
Sealing ring for the original or transparent clutch cover from Evotech SRL
The sealing ring cannot be inserted, but must be pushed in piece by piece, so to speak.
Otherwise it will be too long when you put it in.

 
20,93 Dollar
incl. 19% tax excl. Shipping costs
Screw set for clutch cover KTM 1290 by Evotech Italy
Aluminium screws M6 for clutch cover KTM 1290 made of Ergal 7075 by Evotech Italy
For use on the original - and on the EVOTECH clutch cover you need the following quantities and dimensions:
3 x 85 mm and 2 x 25 mm
When using the EVOTECH clutch cover protector (PRO-09-01) you need the following quantities and dimensions:
1 x 25 mm, 1 x 30 mm, 2 x 85 mm, 1 x 90 mm
Tightening torques: 8 NM
from 2,78 Dollar
incl. 19% tax excl. Shipping costs
Screw set for clutch cover KTM 1290 by Evotech Italy
Aluminium screws M6 for clutch cover KTM 1290 made of Ergal 7075 by Evotech Italy
For use on the original - and on the EVOTECH clutch cover you need the following quantities and dimensions:
3 x 85 mm and 2 x 25 mm
When using the EVOTECH clutch cover protector (PRO-09-01) you need the following quantities and dimensions:
1 x 25 mm, 1 x 30 mm, 2 x 85 mm, 1 x 90 mm
Tightening torques: 8 NM
from 2,78 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 engine bolt set - 36 pcs. black anodised by Evotech Italy
KTM 1290 engine bolt set M6 - 36 pcs. black anodised by Evotech Italy
Duraluminium screws in Ergal 7075 T6 for the engine.
This kit contains screws of the same length as the original screws.
Please unscrew one original screw at a time and replace it with the duraluminium screw.
Please do not unscrew all screws at once.
It is also recommended to oil or grease the thread of the screws accordingly during assembly.
Tightening torque: 8 NM
Price per screw: 3,02 €
131,89 Dollar
incl. 19% tax excl. Shipping costs
Aluminium screws M5 x 30 for the tank cap KTM 1290 made of Ergal 7075 by Evotech Italy
Aluminium screws M5 x 30 for the tank cap KTM 1290 made of Ergal 7075 by Evotech Italy
Tightening torque: 5 NM
Also fits Ducati Multistrada 1200/1260 and Hypermotard 950
15,73 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 chainring carrier SuperDuke R / GT
KTM 1290 chainring carrier Super Duke R / GT
CNC made of billet aluminium in Italy. Orange or black anodized for long durability.
Optionally, the matching nut set can be used. The standard nuts also fit.
Only the original chainring carrier is replaced.
The shock absorber is not changed.
The conversion takes about 30 minutes.
Assembly & product video here:
YOUTUBE
205,70 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 / Ducati Streetfighter / Panigale hook spanner galvanised steel chain tensioner
Tired of getting out the tool kit and putting the tools together every time you want to tighten your chain?
Then this is the right tool for you. Made of 4 mm galvanised steel with a hole for hanging on the tool wall.
26,62 Dollar
incl. 19% tax excl. Shipping costs
Hook spanner Chain tensioner Single-arm swingarm made of STAINLESS STEEL
Tired of getting out the tool kit and putting the tools together every time you want to tighten your chain?
Then this is the right tool for you. Made of 4 mm STAINLESS STEEL with a hole for hanging on the tool wall.
Total length 40 cm
Custom-made for EVOTECHPARTS with engraving - Made in Germany
30,25 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 Super Duke R from 2017 Garmin Navi Holder by Evotech Performance
The Evotech Performance Garmin-compatible sat nav mount for the KTM 1290 Super Duke R mounts in the rider's peripheral field of vision to keep the right path in front of you while riding.   The holder is simply attached to the tank cap with the help of our INSTALLATION , the Garmin motorbike sat nav can then be attached in the rider's field of vision and adjusted with the thumbscrew behind the screen.

The holder is supplied without the sat nav. Compatible with all Zumo models
108,90 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 Super Duke R from 2020 TomTom Navi Holder from Evotech Performance
Features of the TomTom compatible navi mount for the KTM 1290 Super Duke R from Evotech Performance
The Evotech Performance TomTom-compatible sat nav mount for the KTM 1290 Super Duke R mounts in the rider's peripheral field of vision to keep the right path in front of you while riding.   The holder is simply attached to the tank cap with the help of our INSTALLATION , the TomTom motorbike sat nav can then be attached in the rider's field of vision and adjusted with the thumbscrew behind the screen.

The holder is supplied without the sat nav.
108,90 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 Super Duke R from 2020 Quad Lock compatible nav mount from Evotech Performance
Features of the Quad Lock compatible sat nav mount for the KTM 1290 Super Duke R from Evotech Performances.

The Evotech Performances Quad Lock compatible sat nav mount for the KTM 1290 Super Duke R mounts in the rider's peripheral field of vision to keep the right path in front of you while riding.   The holder is simply attached to the tank cap with the help of our INSTALLATION, the navi can then be attached in the rider's field of vision and adjusted with the thumbscrew behind the screen.

The holder is supplied without the sat nav.
131,89 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 R 2020+ Navigation Holder SP Connect by Evotech Performance
Features of the Evotech Performance SP Connect compatible nav mount for the KTM 1290 Super Duke R.

    Attaches directly to the tank cap trim with no modifications required
    SP Connect mounting point fully integrated into the mount
    Wing screws allow screen angle to be changed
    Bracket CNC machined from lightweight aluminum
    Powder coated black for durability
    For illustrated online installation instructions, click here: INSTALLATION
 
What is a motorcycle phone mount?  

The EP SP Connect-compatible nav mount for the KTM 1290 Super Duke R mounts over the center handlebar clamp and is in the rider's field of view to facilitate navigation while riding. The SP Connect interface allows quick and easy access to your smartphone, while the two-stage locking system securely attaches your phone to the bike.   The easy-to-install smartphone GPS mount comes with all the necessary mounting hardware included in the kit.  

Note: Our mount works in conjunction with the SP micro stem mount alu #53122 and anti-vibration module #53135.
SP Connect interface plate #53122, smartphone case, connection cable and smartphone are not included.
108,90 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 Super Duke R from 2020 Navi Holder by Evotech Performance
Features of the Garmin-compatible sat nav mount for the KTM 1290 Super Duke R from Evotech Performance

    CNC-machined from lightweight aluminium
    Mounts directly to the fuel filler cap fairing with no modifications required
    Black powder-coated for durability
 
The bracket is supplied as shown with the 4 screws and 4 bushes and the support pad.
Our mounts are suitable for the various systems TomTom, Sp Connect, Garmin etc.
70,18 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 R Rectifier Protection from 2013 - 2019 by Evotech Performance
Rectifier protection for KTM 1290 SD R
This rectifier protection model 2013 - 2019 fits when used with:
original pillion footrests or only with right EVOTECH EXHAUST HOLD (or similar) or even if both are not mounted.
This holder fits therefore with every variation.
All screws and mounting parts are included.
INSTALLATION
50,82 Dollar
incl. 19% tax excl. Shipping costs
Garmin Navi mount on Evotech Performance bracket system
With this interface plate you can convert your Navi mount (from Evotech Performance) to the Garmin mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate  
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Compatible with all Zumo models.
Note: The Garmin Motorcycle Navi is not included.
38,72 Dollar
incl. 19% tax excl. Shipping costs
SP Connect Navigation Interface Plate from Evotech Performance
This interface plate allows you to convert your Evotech Performance nav mount to the SP Connect mount system.
The mounts are machined from lightweight aluminium and feature EP's signature black powder coating.
The kit consists of:

    1 x interface plate
    1 x pivot plate  
    Plus all necessary fixings

This item is only compatible with Evotech Performance pivot style sat nav mounts.
Note: Our mount works in conjunction with SP micro stem mount alu #53122 and anti-vibration module #53135.
SP Connect interface plate #53122, smartphone case, connection cable and smartphone are not included.
38,72 Dollar
incl. 19% tax excl. Shipping costs
Quad Lock Interface Plate Navi by Evotech Performance
The kit consists of:
   1 x Quad Lock bracket
    1 x interface plate  
    Plus all necessary fittings


This item is only compatible with Evotech Performance pivot style sat nav mounts.
Note: Quad Lock interface smartphone case, connection cable, and smartphone are not included.
38,72 Dollar
incl. 19% tax excl. Shipping costs
KTM Garmin Compatible Navi Holder by Evotech Performance
Features of the Evotech Performance Garmin compatible nav mount
Hole spacing 88mm centre/centre

    Black powder coated mount with precision Garmin mounting point
    Adjustable horizontal pivot point for good visibility
    Attaches to handlebar clamp
    No modification to the motorcycle required
    Installation instructions can be found here: INSTALLATION
71,39 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 Quad Lock compatible sat nav holder from Evotech Performance
Features of the Evotech Performance Quad Lock compatible sat nav mount for your KTM
You can find out which motorbike this mount fits here under all MODELS

    Centrally positions a smartphone in front of the rider
    Is attached with the handlebar clamp
    Quad Lock attachment point already integrated in the EP mount
    Compatible with all Quad Lock motorbike mounts and Quad Lock motorbike accessories
    All other mounts included in the kit
    Adjustable horizontal pivot point for easy visibility
    You can see how to install this bracket here: INSTALLATION
    You can find a video about the product HERE
87,12 Dollar
incl. 19% tax excl. Shipping costs
TomTom Navi mount on Evotech Performance bracket system
With this interface plate you can convert your Navi mount (from Evotech Performance) to the TomTom mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate  
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Note: The TomTom Motorcycle Navi is not included.
36,30 Dollar
incl. 19% tax excl. Shipping costs
Evotech nut set black (6 pcs.) M10x1,25 chainring carrier KTM 1290 SDR / GT
Aluminium nut set M10x1.25 ( Ergal 7075 T 6 - high strength)
in BLACK anodised for original chainring carrier or the chainring carrier shown on the other photos.
For the KTM 1290 SDR / GT
Tightening torque 45 Nm
36,30 Dollar
incl. 19% tax excl. Shipping costs
Evotech nut set RED (6 pcs.) M10x1,25 chainring carrier KTM 1290 SDR / GT
Aluminium nut set M10x1.25 ( Ergal 7075 T 6 - high strength)
in RED anodised for original chainring carrier or the chainring carrier shown on the other photos.
For the KTM 1290 SDR / GT
Tightening torque 45 Nm
36,30 Dollar
incl. 19% tax excl. Shipping costs
Evotech nut set ORANGE (6 pcs.) M10x1,25 chainring carrier KTM 1290 SDR / GT
Aluminium nut set M10x1.25 ( Ergal 7075 T 6 - high strength)
in ORANGE anodised for original chainring carrier or the chainring carrier shown on the other photos.
For the KTM 1290 SDR / GT
Tightening torque 45 Nm
36,30 Dollar
incl. 19% tax excl. Shipping costs
Evotech nut set ORANGE (6 pcs.) M8x1,25 chainring KTM 1290 SDR / GT
Aluminium nut set M8x1.25 ( Ergal 7075 T 6 - high strength)
in ORANGE anodised for the chainring.
For the KTM 1290 SDR / GT
Tightening torque 35 Nm with threadlocker
36,30 Dollar
incl. 19% tax excl. Shipping costs
Evotech nut set BLACK (6 pcs.) M8x1,25 chainring KTM 1290 SDR / GT
Aluminium nut set M8x1.25 ( Ergal 7075 T 6 - high strength)
in BLACK anodised for the chainring.
For the KTM 1290 SDR / GT
Tightening torque 35 Nm with threadlocker
36,30 Dollar
incl. 19% tax excl. Shipping costs
Evotech nut ORANGE (1 pcs.) M8x1,25 chainring KTM 1290 SDR / GT
Aluminium nut M8x1.25 ( Ergal 7075 T 6 - high strength)
in ORANGE anodised for the chainring.
For the KTM 1290 SDR / GT
Tightening torque 35 Nm with threadlocker
7,26 Dollar
incl. 19% tax excl. Shipping costs
Action security camera front mudguard mount
Features of the Evotech Performance action/security camera mount
Suitable for the following MODELS

    Horizontal pivot point for easy adjustment
    Attaches to the front mudguard bracket
    No modification to the motorbike required
    Easy to understand, illustrated instructions are available for download INSTALLATION
 
What is a motorbike action camera mount?
The EP action camera mount allows the rider to record the ride from the optimum viewing position.
The mount attaches to the front mudguard bracket, with all necessary fixings included in the kit.
Our mount is compatible with all action camera devices that use the universal action camera mounting system.
77,44 Dollar
incl. 19% tax excl. Shipping costs
rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - BLACK - Left
Very high quality duraluminium nut (7075T6) for the left side of the chain wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut left side with 41 mm wrench size.
59,29 Dollar
incl. 19% tax excl. Shipping costs
Rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - BLACK - Right
Very high quality duraluminium nut (7075T6) for the right side of the rear wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut right side with 60 mm wrench size.
68,97 Dollar
incl. 19% tax excl. Shipping costs
Rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - Orange - Right
Very high quality duraluminium nut (7075T6) for the right side of the rear wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut right side with 60 mm wrench size.
68,97 Dollar
incl. 19% tax excl. Shipping costs
Rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - Orange - left
Very high quality duraluminium nut (7075T6) for the left side of the rear wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut left side with 41 mm wrench size.
59,29 Dollar
incl. 19% tax excl. Shipping costs
Brake caliper protection for Brembo brake calipers from Evotech Performance
Evotech Performance has designed and manufactured a protection to protect your Brembo brake calipers.
These brake caliper protectors can be fitted to your motorcycle without any modifications.
CNC machined from aircraft grade aluminium.
Finished with a durable black powder coating.
All necessary fixings are supplied with the kit.
Delivered are 1 pair for 2 brake calipers
INSTALLATION
Suitable for the following motorcycles: MODELS
39,93 Dollar
incl. 19% tax excl. Shipping costs
Oil lock screw - ORANGE - KTM 1290 SDR / GT / LC8 engin
Oil lock screw - ORANGE - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
including sheet metal for receiving the safety wire.
The colour of the anodisation may change slightly when exposed to heat. This is not a reason for complaint, as it is unavoidable.
The rubber seal from the old lock can be reused....... YOUTUBE Video
30,25 Dollar
incl. 19% tax excl. Shipping costs
Oil lock screw - BLACK - KTM 1290 SDR / GT / LC8 engine
Oil lock screw - BLACK - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
including sheet metal for receiving the safety wire. The rubber seal from the old lock can be reused....... YOUTUBE Video
30,25 Dollar
incl. 19% tax excl. Shipping costs
Bremsbelag Brembo SA Sinter 07BB37SA
-23%
Design: Brake lining (disc brake)
Brake lining: Sintered metal road
width: 102,2 mm
height: 42 mm
thickness: 7,7 mm
Suitable for the following motorcycles:
VEHICLE LIST

If you want to install cheaper, but equally good, biting pads, take a look here: GALFER
RRP 71,39 Dollar
Only 54,45 Dollar
incl. 19% tax excl. Shipping costs
Crash protector on the rear axle from Evotech Performance
Optimal protection for swingarm and fork with a slight fall or overturning of the motorcycle.
Good protection for expensive motorcycle parts. Mounting on the rear wheel axle.
Assembly time approx. 10min. each axis
Weight: 220 grams per axlespare parts.
INSTALLATION

 
75,02 Dollar
incl. 19% tax excl. Shipping costs
Brake lining Brembo SA Sinter 07BB2065
original equipment flooring
Type 50, sintered metal
Design: Brake lining (disc brake)
Brake pad: Sintered metal OEM
width: 50,8 mm
height: 53,7 mm
thickness: 7,4 mm
With ABE
Suitable for the following motorcycles:
FAHRZEUGLISTE

 
48,40 Dollar
incl. 19% tax excl. Shipping costs
Crash protector on the front axle from Evotech Performance
Optimal protection for swingarm and fork with a slight fall or overturning of the motorcycle.
Suitable for the following MODELS
Good protection for expensive motorcycle parts. Mounting on the front wheel axle.....

INSTALLATION
55,66 Dollar
incl. 19% tax excl. Shipping costs
License plate and reflector mounting kit
Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts
10,89 Dollar
incl. 19% tax excl. Shipping costs
Spare spindle head for Evotech Performance axle protectors
Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.

Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm
12,10 Dollar
incl. 19% tax excl. Shipping costs
Ersatz Crash Protektor Evotech
REPLACEMENT CRASH PROTECTOR  EVOTECH PERFORMANCE - 1 Pieces
60 mm x 70 mm
26,62 Dollar
incl. 19% tax excl. Shipping costs
1 to 72 (from a total of 72)
Here you can find noble accessories from EVOTECH PERFORMANCE for your KTM 1290 R from 2017 to 2019