MAIN PAGE » KTM » KTM 790 / 890 DUKE » Oil lock screw - ORANGE - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke

Oil lock screw - ORANGE - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke

Oil lock screw - ORANGE - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
including sheet metal for receiving the safety wire.
The colour of the anodisation may change slightly when exposed to heat. This is not a reason for complaint, as it is unavoidable.
The rubber seal from the old lock can be reused. YOUTUBE Video

Customer reviews

Unfortunately there are no reviews yet. Be the first who rates this product.

Your opinion

Customers who bought this product bought also the following products:

Number plate holder for KTM 1290 Super Duke R - from 2020 by EVOTECH PERFORMANCE

KTM 1290 Super Duke R - License plate holder...

Suitable for the 1290 KTM Super Duke R 2020 + (does not fit on the RR)
Evotech Performance has designed and manufactured a KTM Superduke license plate holder with CAD.W.T (Concealed Designed Wire Technology). The C.D.W.T is only achievable with the highest design and quality machining for which Evotech Performance is known.
Machined from billet aluminium and matt black coated. The original license plate light and turn signals (not included) are retained.
A new license plate light with matching adapter is included.
Plug & Play only, so no additional wiring is required. Incl. Reflektorkit.
If you need a reinforced noble number plate, look HERE
Info: If the license plate light does not work, please exchange the cables. With the first series the manufacturer probably made a mistake.
INSTALLATION

327,25 Dollar

Reinforced number plate made of DIBOND® material 180 x 200 mm

Reinforced number plate (D) 180 x 200 mm...

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm

The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.

The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT

15,47 Dollar

This product was added to our catalog on Sunday, February 18, 2018.