MAIN PAGE » BMW » BMW S 1000 R from 2013

BMW S 1000 R from 2013

Tail Tidy BMW S 1000 R/RR 2010-2018 from Evotech

for the following models:
BMW S 1000 RR - from 2010 - 2018
BMW S 1000 R from 2013
BMW S 1000 RR HP4 2013 - 2016
This short license plate holder from Evotech is specially designed for your BMW S1000 R / RR to make them look even better.
INSTALLATION

RRP 155,25 Dollar
Only 133,65 Dollar

incl. 19% tax excl. Shipping costs

BMW S 1000 R/RR/XR - from 2010 - 2019 Water and oil cooler protection for the

Water and oil cooler protection from EVOTECH PERFORMANCE for the following models:
BMW S 1000 RR - from 2010 - 2018
BMW S 1000 R from 2013
BMW S 1000 XR from 2015
BMW S 1000 RR HP4 2013 - 2016 ....
The radiator guard fits the following models.
The corresponding installation instructions are provided for each model.
All Modells

174,15 Dollar

incl. 19% tax excl. Shipping costs

BMW - Garmin compatible handlebar clamp nav mount from Evotech Performance

Features of the Evotech Performance Garmin compatible nav mount for the BMW S 1000 R, F900, F750, F850.
This navigation mount fits the following MODELS

    Black powder coated mount with precision Garmin mounting point
    Adjustable horizontal pivot point for good visibility
    Attaches to handlebar clamp
    No modification to the motorcycle required
    Installation instructions can be found here: INSTALLATION

74,25 Dollar

incl. 19% tax excl. Shipping costs

Paddock Stand Mount Kawasaki, BMW by Evotech Performance

Evotech Performance's rear stand mounts are a must for motorbike maintenance.
Made in the UK.
CNC machined from a high quality nylon.
Internally made from aluminium for added strength.
All necessary fixings are supplied with the kit.
Please also note that these stand spools are designed to be stable to support the weight of the motorbike during storage and routine maintenance and servicing.
They are not designed to support the additional weight of a person sitting on the motorbike.
INSTALLATION

43,20 Dollar

incl. 19% tax excl. Shipping costs

Garmin Navi mount on Evotech Performance bracket system

With this interface plate you can convert your Navi mount (from Evotech Performance) to the Garmin mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Compatible with all Zumo models.
Note: The Garmin Motorcycle Navi is not included.

40,50 Dollar

incl. 19% tax excl. Shipping costs

TomTom Navi mount on Evotech Performance bracket system

With this interface plate you can convert your Navi mount (from Evotech Performance) to the TomTom mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Note: The TomTom Motorcycle Navi is not included.

40,50 Dollar

incl. 19% tax excl. Shipping costs

License plate and reflector mounting kit

Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts

10,80 Dollar

incl. 19% tax excl. Shipping costs

Reinforced number plate made of ALUCOBOND® material 180 x 200 mm

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light ALUCOBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.
The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
We stuck the number plate with mirror tape with 3 strips. Optically perfect and holds.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.

16,20 Dollar

incl. 19% tax excl. Shipping costs

Spare spindle head for Evotech Performance axle protectors

Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.
Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm

10,80 Dollar

incl. 19% tax excl. Shipping costs

1 to 9 (from a total of 9)