ACCESSORIES

ACCESSORIES
Reinforced number plate made of DIBOND® material 180 x 200 mm
-23%
10 Pieces - Reinforced number plate made of DIBOND® material 180 x 200 mm
10 pieces for a special price
Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
RRP 157,30 Dollar
Only 121,00 Dollar
incl. 19% tax excl. Shipping costs
TECMATE
-6%
TECMATE "OptiMATE1 DUO" battery charger
TECMATE "OptiMATE1 DUO" battery charger
Charging current 0.6A, suitable for standard, AGM, gel and lithium batteries (LiFePO4 / LFP), battery capacity 2Ah - 30Ah, automatic switch-off, fresh-keeping function
4-stage charger and battery maintenance unit, charges and maintains all vehicle batteries without any settings on the unit. With three indicator lights to show the charging process. ...
RRP 54,45 Dollar
Only 50,82 Dollar
incl. 19% tax excl. Shipping costs
USB charger from Evotech Performance
USB charger from Evotech Performance
The Evotech Performance Motorcycle USB Charger is a device that supplies power to electronic devices via a USB interface.
Extended range: The 2.2 metre long cable offers a long range so that you can conveniently install and mount the USB charger in different places on your motorbike. This flexibility ensures that the charger can be optimally positioned to be accessible while riding or parking.
Direct connection to the battery or ignition switch: Direct connection to the motorbike battery or ignition switch ensures a stable and reliable power source for the USB charger. However, we recommend connecting a fuse element in between. This direct wiring allows the charger to draw power directly from the motorbike's electrical system, ensuring a consistent and reliable power supply for chargers.
You can find an installation video HERE
35,09 Dollar
incl. 19% tax excl. Shipping costs
Reinforced number plate made of DIBOND® material 180 x 200 mm
Reinforced number plate (D) 180 x 200 mm made of DIBOND® material

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm

The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.

The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT
15,73 Dollar
incl. 19% tax excl. Shipping costs
Reinforced licence plate 210 x 170 mm made of DIBOND® material (A)
Reinforced licence plate (A) 170x210 mm made of DIBOND® material
Are you looking for a stable and visually clean solution for mounting your licence plate on your motorbike in Austria?
We offer a 3 mm thick, 100 gram lightweight DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the licence plate.
The plate is matt black on one side and glossy black on the other.
The plate is supplied without holes.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE licence plate holders. If not, it is available HERE.
15,73 Dollar
incl. 19% tax excl. Shipping costs
Reinforced number plate made of DIBOND® material 180 x 140 mm
Reinforced number plate (CH+LI) 180 x 140 mm made of DIBOND® material
Are you looking for a stable and visually clean solution for mounting your Swiss or Lichtenstein licence plate?
We offer a 3 mm thick, 100 gram lightweight DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the licence plate.
The plate is matt black on one side and glossy black on the other.
The plate is supplied without holes.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE licence plate holders. If not, it is available HERE.
14,52 Dollar
incl. 19% tax excl. Shipping costs
License plate and reflector mounting kit
License plate and reflector mounting kit
Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts
10,89 Dollar
incl. 19% tax excl. Shipping costs
B&M reflector with self-adhesive film in red 89 x 13 mm E tested
B&M reflector with self-adhesive film in red 89 x 13 mm E tested
SHIN YO reflector with self-adhesive film in red 123 x 12 mm
7,26 Dollar
incl. 19% tax excl. Shipping costs
Tire Lever Evotechparts
Tire Lever & Bottle Opener Evotechparts
Tyre levers for bicycles - can also be used as bottle openers.
With imprint Evotechparts
2 pieces of plastic
4,84 Dollar
incl. 19% tax excl. Shipping costs
1 to 9 (from a total of 9)