Specials

Automatic torque wrench 1/2 inch 60-330 Nm...

Perfect for tightening the rear wheel with the correct torque with ease.
The long lever makes light work of it.
Switchable for left and right-hand operation. GS tested. The adapter 4000824474 is required to use the sockets also offered here (60, 55 and 41 mm).
With calibration certificate

    Square drive: 1/2 inch
    Torque adjustable: 70 to 330 Nm
    incl. case
    Weight: 1.9 kg
    Length: 563 mm

RRP 116,82 Dollar
Only 93,22 Dollar

Ducati Streetfighter / Panigale V4 / V2 number...

EVOTECHPARTS has co-developed a shorter number plate holder and had it made exclusively for us in this design.
Fits all Ducati Streetfighter and Panigale models with the V2 or V4 engine (from 2020).
MADE IN GERMANY
You can find a YOUTUBE video HERE
Material: Black matt anodised aluminium incl. E-approved number plate light and reflector.
Included are 2 brackets for the standard turn signals* which can still be used. The licence plate is also included in the delivery.
The angle plate, which is locked into the motorbike mount, is made of steel (black powder-coated).
The angle is adjustable and has the required 30° as shown.
The distance between the turn signals and the end of the tyre also meets the legal requirements of 30 cm.
Thus "ALL SAFE".
If you still need an additional licence plate, we can recommend this one: LICENCE PLATE PLATE
Visually a very nice solution
* Indicators are not included in the scope of delivery
Also available with licence plate for Swiss and Lichtenstein licence plates on request

RRP 289,10 Dollar
Only 265,50 Dollar

Ducati Streetfighter / Panigale V4 / V2...

This model is suitable for Swiss and Lichtenstein licence plates.
EVOTECHPARTS has co-developed a shorter number plate holder and had it made exclusively for us in this design.
Fits all Ducati Streetfighter and Panigale models with the V2 or V4 engine (from 2020).
MADE IN GERMANY
You can find a YOUTUBE video HERE
Material: Black matt anodised aluminium incl. E-approved number plate light and reflector.
Included are 2 brackets for the standard turn signals* which can still be used. The licence plate is also included in the delivery.
The angle plate, which is locked into the motorbike mount, is made of steel (black powder-coated).
The angle is adjustable and has the required 30° as shown.
The distance between the turn signals and the end of the tyre also meets the legal requirements of 30 cm.
Thus "ALL SAFE".
If you still need an additional licence plate, we can recommend this one: LICENCE PLATE PLATE
Visually a very nice solution
* Indicators are not included in the scope of delivery
Also available with licence plate for Swiss and Lichtenstein licence plates on request

RRP 289,10 Dollar
Only 265,50 Dollar

Reinforced number plate made of DIBOND® material 180 x 200 mm

10 Pieces - Reinforced number plate made...

10 pieces for a special price
Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.

RRP 153,40 Dollar
Only 118,00 Dollar

ACE BIKES Lashing strap set "Deluxe Duo...

ACE BIKES "Deluxe Duo" Lashing Strap Set
Consisting of tensioning ratchets and lashing straps with rubberised hooks secured with a locking clip. The integrated loops have a soft coating to prevent scratches on sensitive surfaces. Tested according to DIN EN 12195-2.
With this lashing strap set, two-wheelers of any kind can be secured on a trailer or transport vehicle in accordance with regulations. For this purpose, the sewn-on lashing loops are pulled through the fork bridge or over the handlebar. Then the hook of the lashing strap is hooked into the loop.
Scope of delivery:
- 2x tension ratchets incl. hooks (lashing force per ratchet: 900 daN)
- 2x lashing straps incl. hooks (length 197cm/lashing force: 900 daN)
- High quality carrier bag
Set incl. carrier bag

RRP 73,16 Dollar
Only 58,53 Dollar

ACE BIKES "Heavy Duty" Lashing Strap Set...

ACE BIKES "Heavy Duty" Lashing Strap Set
Consisting of tensioning ratchets and lashing straps with rubberised hooks secured with a locking clip and two lashing loops. Tested according to DIN EN 12195-2.
With this lashing strap set, two-wheelers of any kind can be secured on a trailer or transport vehicle in accordance with the regulations. For this purpose, the lashing loops are attached to the fork leg, a footrest or another part of the chassis, thus providing an attachment point for the hooks of the lashing strap without damaging the paint or other parts.
Scope of delivery:
- 2x tension ratchets incl. hooks (lashing force per ratchet: 750 daN)
- 2x lashing straps incl. hooks (length each 180cm/lashing force: 750daN)
- 2x lashing loops (length each 47cm/lashing force: 500daN)
- High quality carrying bag
Set incl. carrier bag

RRP 49,56 Dollar
Only 39,65 Dollar

ACE BIKES Transport lock Tyrefix Basic

ACE BIKES "Tyrefix Basic" transport safety device
Special belt fastening system with tensioning strap system for additional lashing of motorbikes and scooters of various types.
With the Tyrefix Basic, the front or rear tyre can be additionally secured on a trailer or transport vehicle. The vehicle must be secured with additional tensioning straps in order to secure it for transport in accordance with regulations.
Set incl. various fastening elements

RRP 73,16 Dollar
Only 58,53 Dollar

ACE BIKES "Tyrefix" transport safety device...

ACE BIKES "Tyrefix" transport safety device
Special strap fastening system for additional lashing of motorbikes of various types.
The Tyrefix can be used to additionally secure the front or rear tyre on a trailer or transport vehicle. To secure the vehicle for transport in accordance with regulations, it must also be secured with other lashing straps.
Scope of delivery:
- Tyrefix cover (dimensions: 41 x 22 cm) with two integrated lashing straps (length 65 cm each / lashing force: 500 daN)
- High quality carrying bag
Set incl. carrier bag

RRP 105,02 Dollar
Only 84,02 Dollar

Ducati Streetfighter V4 wingletset made of...

Ducati Streetfighter V4 wingletset made of aluminium in RED by Evotech Italy
incl. 8 matching aluminium screws

RRP 289,10 Dollar
Only 253,70 Dollar

Brake lining Brembo Sinter 07BB2065 - rear...

original equipment flooring
Type 50, sintered metal
Design: Brake lining (disc brake)
Brake pad: Sintered metal OEM
width: 50,8 mm
height: 53,7 mm
thickness: 7,4 mm
With ABE
Suitable for the following motorcycles:
FAHRZEUGLISTE

RRP 47,20 Dollar
Only 37,76 Dollar

Ducati Streetfighter V4 Rear Cover (2020+)...

Evotech Performance has designed and manufactured a rear cover for the Ducati Streetfighter V4 motorbikes.
Very quick to fit.
No modifications are required to your Ducati Streetfighter V4, V4S or V4 SP.
It is attached to the existing mounting points.
CNC machined from lightweight aircraft grade aluminium.
Powder coated black for durability.
All necessary mounting hardware is included in the kit.

RRP 64,90 Dollar
Only 51,92 Dollar

Suzuki GSX-R1000 Axle Protection Protector...

Features of the Evotech Performance Axle Protection Protector Set for the Suzuki GSX-R1000 / R
    Outer spool made of nylon, inner spool made of aluminium
    Held by stainless steel spindle rod through the wheel spindle
    Innovative design by Evotech Performance using the highest quality materials
    Replacement spool heads can be purchased separately

If you need help with installation, see the INSTALLATION s guide.

RRP 100,30 Dollar
Only 90,27 Dollar

Axle protection front axle Husqvarna Svartpilen / Vitpilen 701 Evotech Performance

Husqvarna Axle protection FRONT axle Svartpilen...

Features of the Evotech Performance front spindle impact protection for the Husqvarna Svartpilen / Vitpilen 701

Robust nylon coil heads with aluminium core
Mounted through the axle of the front fork
Including spindle rod and all necessary nuts
Evotech Performance manufactured using the highest quality materials
Individual replacement coils can be purchased separately

INSTALLATION

RRP 55,46 Dollar
Only 47,20 Dollar

Axle protection rear axle Husqvarna Svartpilen / Vitpilen 701 Evotech Performance

Husqvarna Axle protection rear axle Svartpilen...

Features of the Evotech Performance rear spindle impact protection for the Husqvarna Svartpilen / Vitpilen 701

Robust nylon coil heads with aluminium core
Mounted through the axle of the front fork
Including spindle rod and all necessary nuts
Evotech Performance manufactured using the highest quality materials
Individual replacement coils can be purchased separately

INSTALLATION

RRP 61,36 Dollar
Only 53,10 Dollar

Suzuki V-Strom 1050 Crash Protektor from Evotech Performance

Suzuki V-Strom 1050 Crash Protektor up 2020...

Evotech Performance has designed and manufactured impact protectors for the Suzuki V-Strom 1050 that are very easy to fit.
Simply attach to the existing mounting points on your motorbike.
No modifications are required.
The mounts are CNC machined from aircraft grade aluminium and powder coated black on the outside for durability.
The axle is made of stainless steel.
INSTALLATION

RRP 128,62 Dollar
Only 81,42 Dollar

TECMATE "OptiMATE1 DUO" battery charger...

TECMATE "OptiMATE1 DUO" battery charger
Charging current 0.6A, suitable for standard, AGM, gel and lithium batteries (LiFePO4 / LFP), battery capacity 2Ah - 30Ah, automatic switch-off, fresh-keeping function
4-stage charger and battery maintenance unit, charges and maintains all vehicle batteries without any settings on the unit. With three indicator lights to show the charging process. ...

RRP 53,10 Dollar
Only 49,56 Dollar

YAMAHA YZF-R1, FZ-10, MT-10 Carbon fibre...

Evotech Performance has produced a carbon fibre toe guard for various Yamahas.
The Yamaha Carbon Fibre Footpeak Protector is machined from carbon fibre.
All fixings required are included in the kit.
Supplied is 1 toe guard as shown above left.
Evotech Performance has produced a carbon fibre toe guard for various Yamahas.
The Yamaha Carbon Fibre Footpeak Protector is machined from carbon fibre.
All fixings required are included in the kit.
Supplied is 1 toe guard as shown above left.
Suitable for the following MODELS
How to install the part you will find here: INSTALLATION

RRP 64,90 Dollar
Only 47,08 Dollar

Bremsbelag Brembo SA Sinter 07BB37SA - Front...

Design: Brake lining (disc brake)
Brake lining: Sintered metal road
width: 102,2 mm
height: 42 mm
thickness: 7,7 mm
Suitable for the following motorcycles:
VEHICLE LIST

RRP 69,62 Dollar
Only 53,10 Dollar

KETTEN KIT DID 525 ZVMX Silent for KTM 1290...

D.I.D chain set for the KTM 1290 SuperDuke R or GT from 2014 onwards
Translation: 17-38-112/525
Sprocket: steel, noise reduced, chain wheel: steel

DID Standard, 525ZVM-X(G&G), X-Ring
Quality: Standard
Features: noise reduced
Chain pitch: 525
Type: ZVMX
Number of chain links: 112
Design: X-Ring
Number of teeth Pinion: 17
Number of teeth sprocket: 38
Material: steel
Colour: gold

RRP 234,82 Dollar
Only 217,12 Dollar

Ducati Panigale 1299/ 1199 und Streetfighter...

CNC machined from billet aluminium in Italy.
Red or black anodized for long durability.
Optionally the matching nut set can be used.
The standard nuts also fit.
Only the original chainring carrier will be replaced.
The shock absorber is not changed.
The time needed for the conversion takes about 30 minutes.
This chainring carrier fits:
Ducati Panigale 1299 / 1199 and Ducati Streetfighter 1098 / 1198 with 6 hole mount

RRP 182,90 Dollar
Only 116,82 Dollar