MAIN PAGE » BMW » BMW S 1000 XR 2015 to 2019

BMW S 1000 XR 2015 to 2019

Water and oil cooler protection for the BMW S 1000 RR - from 2010 - 2018 and BMW S 1000 R from 2013 onwards

BMW S 1000 R/RR/XR from 2010 - 2020 Water and oil cooler protection

Water and oil cooler protection from EVOTECH PERFORMANCE for the following models:
BMW S 1000 RR - from 2010 - 2018
BMW S 1000 R from 2013
BMW S 1000 XR from 2015
BMW S 1000 RR HP4 2013 - 2016 ....
The radiator guard fits the following models.
The corresponding installation instructions are provided for each model.
All Modells

163,35 Dollar

incl. 19% tax excl. Shipping costs

Tail Tidy BMW S 1000 XR up 2015 from Evotech

BMW S 1000 XR 2015 - 2019 Tail Tidy from Evotech Performance

for the following models:
BMW S 1000 XR up 2015 - 2019
This short license plate holder from Evotech is specially designed for your BBMW S 1000 XR 2015 - 2019 to make them look even better.
If you need a reinforced noble number plate, look HERE
INSTALLATION

260,15 Dollar

incl. 19% tax excl. Shipping costs

Replacement rear light for Evotech Performance number plate holder

Replacement tail light for motorbikes
Our light is a brake and number plate light in one.
Screw spacing centre/centre 63 mm
The light is E-marked and fully homologated.
Spare part for BMW part number 63 21 7 711 000 and 63 21 8 551 834
This item fits in:
BMW G450X
BMW R NineT
BMW R NineT Pure
BMW R NineT Racer
BMW R NineT Urban G/S
BMW S 1000 XR licence plate holder PRN012717
BMW F 900 R / XR licence plate holder PRN015165
Ducati Diavel
General overview: Suitable for the following MODELS

119,79 Dollar

incl. 19% tax excl. Shipping costs

Hand protector BMW S 1000 XR / R 1250 GS / F 900 from Evotech Performance

Evotech Performance has developed and manufactured these hand protectors for the BMW S 1000 XR / R 1250 GS / F 900 , which are also easy to fit.
They are simply attached to the existing mounting points of your motorcycle.
No changes are necessary.
The mounts are CNC machined from aircraft grade aluminium and stainless steel and powder coated black on the outside for a long life.
These protectors will protect your motorcycle in case of an accident
Delivery without the plastic trays.
INSTALLATION

187,55 Dollar

incl. 19% tax excl. Shipping costs

BMW F 900 R / XR - S1000XR rear wheel axle protection from Evotech Performance

Optimal protection for the swing arm in case of a slight fall or overturning of the bike.
Good protection for expensive motorbike parts. Mounting on the rear wheel axle. 8mm rod with M8 thread.
Assembly time approx. 10min. per axle
Weight: 220 grams per axle
INSTALLATION

54,45 Dollar

incl. 19% tax excl. Shipping costs

Reinforced number plate made of DIBOND® material 180 x 200 mm

Reinforced number plate (D) 180 x 200 mm made of DIBOND® material

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm

The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.

The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT

15,73 Dollar

incl. 19% tax excl. Shipping costs

Front wheel axle protection BMW by Evotech Performance

Features of the front wheel axle protectors for the BMW

    Specially designed and manufactured for your BMW
    Rolled stainless steel spindle rod holds the coils in place
    Coil exterior made of injection moulded nylon
    Reinforced on both sides with a strong aluminium core
    Replacement spool heads can be purchased separately
    Easy to assemble
Suitable for the following MODELLS
INSTALLATION

55,66 Dollar

incl. 19% tax excl. Shipping costs

BMW S 1000 XR 2015 - 2019 Crash Protectors from Evotech Performance

The Evotech Performance crash bars have been specially developed for the BMW S 1000 XR, Sport, Sport SE from 2015 -2019.
By using the bike's original mounting points, they are easy to fit without modifying your bike in any way.
Easy to follow illustrated instructions are available for download here: INSTALLATION

131,89 Dollar

incl. 19% tax excl. Shipping costs

BMW S 1000 XR / R 1250 GS handlebar final weight 2015 + from Evotech Performance

BMW S 1000 XR / R 1250 GS / F900 XR handlebar final weight 2015 + from Evotech Performance

The BMW S 1000 XR is a great bike, but it's not without faults.
Many owners have experienced annoying handlebar vibrations at about 5,500 rpm.
These handlebar end weights also fit the BMW R 1200 GS, BMW R 1250 GS and the F 900 XR
Evotech Performance has worked hard to develop a solution.
Spare parts are available on request. For these MODEL
INSTALLATION

87,12 Dollar

incl. 19% tax excl. Shipping costs

BMW S 1000 XR / R 1250 GS / F900 XR handlebar final weight 2015 + from Evotech Performance

ATTENTION: Here you only get 1 side (replacement in case of fall) delivered.
The BMW S 1000 XR is a great bike, but it's not without faults.
Many owners have experienced annoying handlebar vibrations at about 5,500 rpm.
These handlebar end weights also fit the BMW R 1200 GS, BMW R 1250 GS and the F 900 XR
Evotech Performance has worked hard to develop a solution.
Spare parts are available on request. For these MODEL
INSTALLATION

45,98 Dollar

incl. 19% tax excl. Shipping costs

Paddock Stand Mount Kawasaki, BMW by Evotech Performance

Paddock Stand Mount Ducati, Kawasaki, BMW, Suzuki by Evotech Performance

Evotech Performance's rear stand mounts are a must for motorbike maintenance.
Made in the UK.
CNC machined from a high quality nylon.
Internally made from aluminium for added strength.
All necessary fixings are supplied with the kit.
Suitable for the following MODELS
Please also note that these stand spools are designed to be stable to support the weight of the motorbike during storage and routine maintenance and servicing.
They are not designed to support the additional weight of a person sitting on the motorbike.
INSTALLATION

42,35 Dollar

incl. 19% tax excl. Shipping costs

Garmin Navi mount on Evotech Performance bracket system

With this interface plate you can convert your Navi mount (from Evotech Performance) to the Garmin mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Compatible with all Zumo models.
Note: The Garmin Motorcycle Navi is not included.

38,72 Dollar

incl. 19% tax excl. Shipping costs

SP Connect Navigation Interface Plate from Evotech Performance

This interface plate allows you to convert your Evotech Performance nav mount to the SP Connect mount system.
The mounts are machined from lightweight aluminium and feature EP's signature black powder coating.
The kit consists of:

    1 x interface plate
    1 x pivot plate
    Plus all necessary fixings

This item is only compatible with Evotech Performance pivot style sat nav mounts.
Note: Our mount works in conjunction with SP micro stem mount alu #53122 and anti-vibration module #53135.
SP Connect interface plate #53122, smartphone case, connection cable and smartphone are not included.

38,72 Dollar

incl. 19% tax excl. Shipping costs

Quad Lock Interface Plate Navi by Evotech Performance

The kit consists of:
   1 x Quad Lock bracket
    1 x interface plate
    Plus all necessary fittings

This item is only compatible with Evotech Performance pivot style sat nav mounts.
Note: Quad Lock interface smartphone case, connection cable, and smartphone are not included.

38,72 Dollar

incl. 19% tax excl. Shipping costs

USB charger from Evotech Performance

The Evotech Performance Motorcycle USB Charger is a device that supplies power to electronic devices via a USB interface.
Extended range: The 2.2 metre long cable offers a long range so that you can conveniently install and mount the USB charger in different places on your motorbike. This flexibility ensures that the charger can be optimally positioned to be accessible while riding or parking.
Direct connection to the battery or ignition switch: Direct connection to the motorbike battery or ignition switch ensures a stable and reliable power source for the USB charger. However, we recommend connecting a fuse element in between. This direct wiring allows the charger to draw power directly from the motorbike's electrical system, ensuring a consistent and reliable power supply for chargers.
You can find an installation video HERE

35,09 Dollar

incl. 19% tax excl. Shipping costs

Quad Lock interface plate Navi from Evotech Performance

The kit consists of:
    1 x Quad Lock bracket
    1 x interface plate
    1 x pivot plate
    Plus all necessary fixings

This item is only compatible with Evotech Performance pivot style sat nav mounts.
Note: Quad Lock interface smartphone case, connection cable, and smartphone are not included.

53,24 Dollar

incl. 19% tax excl. Shipping costs

TomTom Navi mount on Evotech Performance bracket system

With this interface plate you can convert your Navi mount (from Evotech Performance) to the TomTom mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Note: The TomTom Motorcycle Navi is not included.

36,30 Dollar

incl. 19% tax excl. Shipping costs

Bremsbelag Brembo SA Sinter 07BB37SA - Front Site

Design: Brake lining (disc brake)
Brake lining: Sintered metal road
width: 102,2 mm
height: 42 mm
thickness: 7,7 mm
Suitable for the following motorcycles:
VEHICLE LIST
If you want to install cheaper, but equally good, biting pads, take a look here: GALFER

RRP 71,39 Dollar
Only 54,45 Dollar

incl. 19% tax excl. Shipping costs

License plate and reflector mounting kit

Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts

10,89 Dollar

incl. 19% tax excl. Shipping costs

Spare spindle head for Evotech Performance axle protectors

Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.
Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm

12,10 Dollar

incl. 19% tax excl. Shipping costs

1 to 20 (from a total of 20)