Yamaha FZ, MT, YZF, R1

Yamaha rear wheel mount by Evotech Performance
Compatible with the following MODELS
Attaches to rear wheel with a rolled thread stainless steel rod
Fits standard C/V-cup paddock stands
Injection-molded V-shaped nylon spools with reinforced stainless steel interior
Precision-molded, powder-coated black aluminum spacer
All necessary mounting hardware included in kit
Installation instructions can be found here: INSTALLATION
 
What is a Yamaha rear wheel mount from Evotech Performance for?

Owning a motorcycle is not just about the joy of riding, but also about maintaining and storing your machine. With the Yamaha rear wheel mount from Evotech Performance, you can achieve both. The classic V-shaped bobbins are mounted on the rear wheel axle and are suitable for C- or V-paddock stands.  Your motorcycle is then held upright, which is better for the engine, and important maintenance work can be carried out.  EP Paddock Stand Bobbins are machined in the UK from Evotech Performance's robust materials.
Note: EP Paddock Stand Bobbins for the Yamaha YZF-R7 cannot be used to remove the wheel.
Note: EP Paddock Stand Bobbins are designed to support the weight of the motorcycle only. They are not designed to support the additional weight of a person sitting on the motorcycle.

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm

The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.

The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT

Features of the Evotech Performance SP Connect compatible sat nav mount
Suitable for the following MODELS
    Attaches directly to the centre handlebar clamp with no modifications required
    SP Connect mounting point fully integrated into the bracket
    Wing screws allow screen angle to be changed
    Bracket CNC machined from lightweight aluminium
    Black powder coated for durability
    You can find illustrated online installation instructions here under INSTALLATION
 
What do you need a motorbike phone mount for?  

The Eotech Performance SP Connect-compatible sat nav mount mounts over the centre handlebar clamp and is in the rider's field of vision for easy navigation while riding. The SP Connect interface allows quick and easy access to your smartphone, while the two-stage locking system secures your phone to the motorbike.   The easy-to-install smartphone GPS mount comes with all the necessary mounting hardware included in the kit.  

Note: Our mount works in conjunction with the SP micro stem mount alu #53122 and the anti-vibration module #53135.
SP Connect interface plate #53122, smartphone case, connection cable and smartphone are not included.

The Evotech Performance Motorcycle USB Charger is a device that supplies power to electronic devices via a USB interface.
This article is equipped with USB A connection. With USB C connection you can find HERE
Extended range: The 2.2 metre long cable offers a long range so that you can conveniently install and mount the USB charger in different places on your motorbike. This flexibility ensures that the charger can be optimally positioned to be accessible while riding or parking.
Direct connection to the battery or ignition switch: Direct connection to the motorbike battery or ignition switch ensures a stable and reliable power source for the USB charger. However, we recommend connecting a fuse element in between. This direct wiring allows the charger to draw power directly from the motorbike's electrical system, ensuring a consistent and reliable power supply for chargers.
You can find an installation video HERE