MAIN PAGE » DUCATI » SuperSport

Here you will find various add-on parts for your Ducati Supersport

Ducati Monster / SuperSport number plate holder 2017+ by Evotech Performance

Evotech Performance has designed and manufactured a matching tail section for the Ducati Monster and Super Sport.
Fits the following MODELS.
CNC machined from lightweight aircraft grade aluminium.
Secured in place to the existing mounting points.
No modifications to your motorbike are required.
Powder coated black for long life.
The licence plate angle is approx. 40 degrees
INSTALLATION

256,10 Dollar

incl. 19% tax excl. Shipping costs

Ducati Hypermotard, Supersport, Diavel, Monster Wasserkühlerschutz ab 2013

Ducati Hypermotard, Diavel, Supersport, Monster water cooler protection from 2013 onwards

Evotech Performance Radiator Fittings fit directly onto existing brackets.
No modifications to your motorbike are required.
This guard is CNC machined from aircraft grade aluminium.
The unique design allows airflow through the guard while maintaining a high level of protection.
Powder coated black for durability.
All necessary fixings are included in the kit.
Fits the following Ducati MODELS
INSTALLATION 1

132,60 Dollar

incl. 19% tax excl. Shipping costs

Ducati Supersport 950 Water- Oil Cooler Protection Set from 2017 by Evotech Performance

Evotech Performance radiator guards fit directly onto the existing brackets.
No modifications to your motorbike are required.
This guard is CNC machined from aircraft grade aluminium.
The unique design allows airflow through the guard while maintaining a high level of protection.
Powder coated black for durability.
All necessary fixings are included in the kit.
Fits SuperSport from 2017 - 2020 and SuperSport950 from 2021 onwards.
INSTALLATION

193,70 Dollar

incl. 19% tax excl. Shipping costs

Ducati SuperSport ab 2017 Fussrastenaufnahme Abdeckung von Evotech Performance

Ducati SuperSport from 2017 footrest mount cover by Evotech Performance

Evotech Performance has produced a cover plate kit that is a direct replacement for both original footrests.
No modifications to your bike are required.
CNC machined from aircraft grade aluminium.
The black powder coating ensures durability.
All necessary fasteners are included in the kit.

54,60 Dollar

incl. 19% tax excl. Shipping costs

Ducati rear wheel axle protection protector EVOTECH PERFORMANCE

The characteristics of the rear wheel axle protection for the Ducati
Fits the following Ducatis: All models

    Protects the swing arm and the sprocket
    Injection molded nylon coil with an aluminum carrier
    Stainless steel spindle rod with roller thread
    Red anodized hub stop for the outlet side
    Easy installation due to the rear wheel axle
    Spare coil heads can be purchased separately
INSTALLATION

83,20 Dollar

incl. 19% tax excl. Shipping costs

Ducati SuperSport 950 Crash Protector from Evotech Performance

Evotech Performance has developed and manufactured crash protectors for the Ducati SuperSport 950 / S from 2021 that are incredibly easy to fit.
They are simply attached to the existing mounting points on your motorbike.
No modifications are required.
The brackets are made from CNC machined aircraft quality aluminium.
Our crash bars are made from high performance engineering polymer that protects you and your motorbike in the event of a crash.
All brackets and stems are powder coated black for durability.
Easy to understand, illustrated instructions are available for download: INSTALLATION

505,70 Dollar

incl. 19% tax excl. Shipping costs

Front axle protection Ducati from Evotech Performance

Optimal protection for swingarm or fork with a slight fall or overturning of the motorcycle.
Good protection for expensive motorcycle parts. Mounting on the front wheel axle.
Assembly time approx. 10min. each axis
Weight: 220 grams per axlespare parts.
Suitable for the following models
INSTALLATION

62,40 Dollar

incl. 19% tax excl. Shipping costs

DUCATI Sequential LED indicators from Evotech Performance (1 pair)

Evotech Performance offers state-of-the-art aftermarket indicators that improve the aesthetics and safety of your motorbike.
Suitable for the following DUCATI s
These precision-engineered indicators feature a robust aluminium housing that ensures durability and a sleek look. Their sequential flashing technology enhances visibility and style, providing an eye-catching and attention-grabbing signal.
Whether you're upgrading your bike to improve signalling or you're looking for a modern, minimalist design, Evotech Performance indicators are just the thing for your motorbike. Enhance your riding experience with these high-quality indicators that seamlessly combine form and function while meeting the highest quality and performance standards in the world of motorbike accessories.

    Aluminium housing
    Black anodised for durability
    400mm cable length with plugs / Plug&Play
    With ECE test mark

128,70 Dollar

incl. 19% tax excl. Shipping costs

KTM, Ducati, Husqvarna Brake and Clutch Lever Protector Kit from Evotech Performance

Evotech Performance has produced a brake and clutch lever protection kit for KTM, Ducati, Husqvarna... Husqvarna. Please check here if your bike is included: All MODELS.
The protectors are held in place with our unique machined cartridge expansion system.
CNC machined from aircraft grade aluminium and stainless steel.
No modifications are required to your bike.
Finished with a durable black powder coat for durability.
All fixings are supplied with the kit.

253,50 Dollar

incl. 19% tax excl. Shipping costs

KTM, Ducati, Husqvarna handlebar end weights ROAD from Evotech Performance

Features of the Evotech Performance handlebar end weights (ROAD) for various Ducati , KTM, Husqvarna Models.
Suitable for the following MODELS

    Direct replacement for original left and right handlebar weights
    CNC-machined from stainless steel, including all necessary fastening elements
    Unique EP mounting design for a simple but very secure installation
    EP's Touring Option, the higher handlebar end weight offered by Evotech Performance
    Additional weight supports the reduction of high-frequency vibrations
    Discreet, elegant design with EP logos and aesthetics

113,10 Dollar

incl. 19% tax excl. Shipping costs

Reinforced number plate made of DIBOND® material 180 x 200 mm

Reinforced number plate (D) 180 x 200 mm made of DIBOND® material

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm

The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.

The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT

16,90 Dollar

incl. 19% tax excl. Shipping costs

Ducati SuperSport 939/950 from 2017 Quad Lock compatible nav mount - by Evotech Performance

Features of the Evotech Performance Quad Lock compatible nav mount for the Ducati Super Sport 939 (2017 - 2020) and 950 from 2021 onwards

    Places a smartphone centrally in front of the rider
    Attaches via the top bar
    Quad Lock mounting point already integrated into the EP mount
    Compatible with all Quad Lock motorbike mounts and Quad Lock motorbike accessories
    All other mounts are included in the kit
    Adjustable horizontal pivot point for easy viewing

Here are the INSTALLATIONs instructions.

Note: Quad Lock interface smartphone case, connection cable and smartphone are not included.

93,60 Dollar

incl. 19% tax excl. Shipping costs

Ducati SuperSport 939 / 950 TomTom compatible sat nav holder from Evotech Performance

Features of the TomTom-compatible sat nav mount for the Ducati SuperSport 939 (until 2020) and 950 (from 2021) from Evotech Performance

    Designed to fit perfectly with the TomTom mounting system
    Places a TomTom sat nav centrally in front of the rider
    Mount attaches to the handlebar clamp
    Adjustable horizontal pivot point for good visibility
    Fully compatible with TomTom anti-theft lock. Part No. 9uge.001.06

Note: TomTom motorcycle navi not included.
How the part is mounted, you see in the INSTALLATION s instructions

76,70 Dollar

incl. 19% tax excl. Shipping costs

Ducati SuperSport 950 Beeline compatible sat nav holder from Evotech Performance

Ducati SuperSport 950 Beeline compatible sat nav holder from Evotech Performance
Suitable for the following MODELS
Places a Beeline Moto 2 in the centre in front of the rider
Attachment via the upper bracket
Beeline Moto 2 mounting point already integrated into the EP mount
Compatible with all Beeline Moto 2 motorbike mounts and Beeline Moto 2 motorbike accessories
All other mounts are included in the kit
Adjustable horizontal pivot point for easy visibility
Einbauanleitung: INSTALLATON

85,80 Dollar

incl. 19% tax excl. Shipping costs

Ducati SuperSport 939 - 950 Garmin compatible nav mount from 2017 by Evotech Performance

Features of the Evotech Performance Garmin compatible nav mount for the Ducati SuperSport 950 from 2021 onwards and SuperSport 939 from 2017-2020.

    Black powder coated aluminium mount with precision Garmin mounting point.
    Adjustable horizontal pivot point for good visibility
    Mounts to the upper triple clamp
    No modification to the motorbike required

Made from lightweight aluminium and reinforced with a black powder coat finish, the mount installs quickly with the help of our INSTALLATION s.

78,00 Dollar

incl. 19% tax excl. Shipping costs

Ducati SuperSport 939 - 950 SP Connect compatible nav mount from 2017 by Evotech Performance

Features of the EP SP Connect compatible nav mount for the Ducati SuperSport 950
Suitable for the following MODELS

    Places a smartphone centrally in front of the rider
    Mounts to the upper triple clamp
    SP Connect mounting point already integrated into the EP mount
    All other mounting parts are included in the kit
    Adjustable horizontal pivot point for good visibility

What is a motorbike phone mount?
To access your smartphone while riding for applications such as audio and GPS, EP has developed the SP Connect compatible nav mount.   Made from lightweight aluminium and reinforced with EP's signature black powder coating, the mount can be attached to the ignition lock cover using the online step-by-step instructions.   If the SP Connect mounting point is already in place, the rider can attach their smartphone in the chosen SP Connect smartphone case.
Installation instructions: INSTALLATON

Note: Our mount works in conjunction with the SP micro stem mount alu #53122 and the anti-vibration module #53135.
SP Connect interface plate #53122, smartphone case, connection cable and smartphone are not included.

76,70 Dollar

incl. 19% tax excl. Shipping costs

USB A charger from Evotech Performance

The Evotech Performance Motorcycle USB Charger is a device that supplies power to electronic devices via a USB interface.
This article is equipped with USB A connection. With USB C connection you can find HERE
Extended range: The 2.2 metre long cable offers a long range so that you can conveniently install and mount the USB charger in different places on your motorbike. This flexibility ensures that the charger can be optimally positioned to be accessible while riding or parking.
Direct connection to the battery or ignition switch: Direct connection to the motorbike battery or ignition switch ensures a stable and reliable power source for the USB charger. However, we recommend connecting a fuse element in between. This direct wiring allows the charger to draw power directly from the motorbike's electrical system, ensuring a consistent and reliable power supply for chargers.
You can find an installation video HERE

41,60 Dollar

incl. 19% tax excl. Shipping costs

License plate and reflector mounting kit

Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts

15,60 Dollar

incl. 19% tax excl. Shipping costs

Spare spindle head for Evotech Performance axle protectors

Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.
Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm

13,00 Dollar

incl. 19% tax excl. Shipping costs

Crash protector replacement 60 x 70 mm- Evotech Performance

REPLACEMENT CRASH PROTECTOR EVOTECH PERFORMANCE - 1 Pieces
60 mm x 70 mm
If you would like the same product with an additional camera mount, please see HERE

29,90 Dollar

incl. 19% tax excl. Shipping costs

1 to 20 (from a total of 20)