MAIN PAGE » KTM » KTM 1290 » 1290 GT 2016 +

1290 GT 2016 +

KTM 1290 GT 2016 +

KTM 1290 GT up to 2016 License plate holder EVOTECH PERFOMANCE

Machined from billet aluminium and matt black coated. The original license plate light (not included) is retained.
Plug & Play only, so no additional wiring is required.
Please note that this item cannot be used in the USA unless there are KTM LED displays.
INSTALLATION

301,29 Dollar

incl. 19% tax excl. Shipping costs

CRASH PROTECTION KTM 1290 - EVOTECH PERFORMANCE

CRASH PROTEKTOR KTM 1290 GT 2016+ Evotech Performance

Evotech Performance have designed and manufactured KTM 1290 GT 2016+ crash protection bobbins that are incredibly easy to fit.
Simply attaching to your bike’s existing mounting points, No modification is required.......
Installationsanleitung

361,79 Dollar

incl. 19% tax excl. Shipping costs

Motor protection for KTM 1290 SDR from 2014 from EVOTECH PERFORMANCE

Motor protection for KTM 1290 SDR 2014-19 from EVOTECH PERFORMANCE

Evotech Performance has designed and manufactured a motor protection for the KTM 1290 R (2014-2019) Superduke
INSTALLATION
YOUTUBE Video

145,20 Dollar

incl. 19% tax excl. Shipping costs

Reinforced number plate made of DIBOND® material 180 x 200 mm

Reinforced number plate (D) 180 x 200 mm made of DIBOND® material

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm

The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.

The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT

15,73 Dollar

incl. 19% tax excl. Shipping costs

KTM Sequential LED indicators from Evotech Performance (2 Pieces)

Evotech Performance offers state-of-the-art aftermarket indicators that improve the aesthetics and safety of your motorbike.
Suitable for the following KTM s
You can find a video about this product HERE
These precision-engineered indicators feature a robust aluminium housing that ensures durability and a sleek look. Their sequential flashing technology enhances visibility and style, providing an eye-catching and attention-grabbing signal.
Whether you're upgrading your bike to improve signalling or you're looking for a modern, minimalist design, Evotech Performance indicators are just the thing for your motorbike. Enhance your riding experience with these high-quality indicators that seamlessly combine form and function while meeting the highest quality and performance standards in the world of motorbike accessories.

    Aluminium housing
    Black anodised for durability
    400mm cable length with plugs
    With ECE test mark
    Scope of delivery: 2 indicators with cable

108,90 Dollar

incl. 19% tax excl. Shipping costs

KTM Sequential LED indicators from Evotech Performance incl. adapter (4 pieces)

228,69 Dollar

incl. 19% tax excl. Shipping costs

KTM, Ducati, Husqvarna Brake and Clutch Lever Protector Kit from Evotech Performance

Evotech Performance has produced a brake and clutch lever protection kit for KTM, Ducati, Husqvarna... Husqvarna. Please check here if your bike is included: All MODELS.
The protectors are held in place with our unique machined cartridge expansion system.
CNC machined from aircraft grade aluminium and stainless steel.
No modifications are required to your bike.
Finished with a durable black powder coat for durability.
All fixings are supplied with the kit.

223,85 Dollar

incl. 19% tax excl. Shipping costs

Bar end weights from Evotech Performance for KTM, Ducati, Husqvarna

Features of the Evotech Performance handlebar end weights (Touring) for various Ducati , KTM, Husqvarna Models.
Suitable for the following MODELS

    Direct replacement for original left and right handlebar weights
    CNC-machined from stainless steel, including all necessary fastening elements
    Unique EP mounting design for easy but very secure installation
    EP's Touring Option, the higher handlebar end weight offered by Evotech Performance
    Additional weight supports the reduction of high-frequency vibrations
    Discreet, elegant design with EP logos and aesthetics

95,59 Dollar

incl. 19% tax excl. Shipping costs

KTM, Ducati, Husqvarna handlebar end weights ROAD from Evotech Performance

Features of the Evotech Performance handlebar end weights (ROAD) for various Ducati , KTM, Husqvarna Models.
Suitable for the following MODELS

    Direct replacement for original left and right handlebar weights
    CNC-machined from stainless steel, including all necessary fastening elements
    Unique EP mounting design for a simple but very secure installation
    EP's Touring Option, the higher handlebar end weight offered by Evotech Performance
    Additional weight supports the reduction of high-frequency vibrations
    Discreet, elegant design with EP logos and aesthetics

101,64 Dollar

incl. 19% tax excl. Shipping costs

TomTom compatible navigation holder for Yamaha, BMW, KTM by Evotech Performance - 88 mm

Description of the Evotech Performance TomTom compatible sat nav mount for the Yamaha, BMW and KTM.
You can find out which motorbike this mount fits here: All MODELS

    Designed to fit the TomTom mounting system perfectly
    Places a TomTom sat nav centrally in front of the rider
    Mounts to the handlebar clamp
    Adjustable horizontal pivot point for good visibility

    Fully compatible with the TomTom anti-theft lock. Part no. 9uge.001.06
    Installation instructions are available here: INSTALLATION

RRP 71,39 Dollar
Only 66,55 Dollar

incl. 19% tax excl. Shipping costs

Garmin compatible navigation holder for Yamaha, BMW, KTM by Evotech Performance - 88 mm Middle/Middle

Description of the Evotech Performance Garmin compatible sat nav mount for the Yamaha, BMW and KTM.
You can find out which motorbike this mount fits here: All MODELS
Here is a VIDEO about it

    Designed to fit the Garmin mounting system perfectly
    Places a Garmin sat nav centrally in front of the rider
    Mount attaches to the handlebar clamp
    Adjustable horizontal pivot point for good visibility
    Mounting instructions are available here: INSTALLATION

71,39 Dollar

incl. 19% tax excl. Shipping costs

Clutch guard and pressure plate LC8 KTM engine - Black / Orange - EVOTECH S.R.L

Clutch cover transparent for LC8 KTM engine in black by EVOTECH Italy

Clutch cover for LC8 KTM engine - Black by EVOTECH Italy
Scope of delivery:
Black clutch cover - without the clutch release. This must be ordered separately.
Only suitable for the LC8 KTM engine (1290 R, 1390 R, GT, Adventure).
CNC machined from billet aluminium in Italy.
The set is equipped with 5 longer screws made of galvanised steel. Coloured aluminium screws are available as an alternative.
The sealing ring from the installed clutch cover can be used (not included in the delivery, but also available).
There is a video here on YouTube

271,04 Dollar

incl. 19% tax excl. Shipping costs

Clutch release / pressure plate ORANGE KTM 1290 SDR/GT LC8 Motor

Clutch release / pressure plate ORANGE KTM 1290/1390 SDR/GT LC8 Motor

43,56 Dollar

incl. 19% tax excl. Shipping costs

Clutch Release / Pressure Plate Black KTM 1290 SDR/GT LC8 Engine

Clutch Release / Pressure Plate Black KTM 1290/1390 SDR/GT LC8 Engine

43,56 Dollar

incl. 19% tax excl. Shipping costs

KTM 1290/1390 clutch release - black - New Design

54,45 Dollar

incl. 19% tax excl. Shipping costs

KTM 1290/1390 clutch release - orange - New Design

54,45 Dollar

incl. 19% tax excl. Shipping costs

Formring clutch cover KTM LC8 1290ccm SuperDuke or GT

clutch cover Formring KTM LC8 KTM LC8 1290 / 1390 ccm

Formring clutch cover KTM LC8 KTM LC8 1290 / 1390 ccm
Sealing ring for the original or transparent clutch cover from Evotech SRL
The sealing ring cannot be inserted, but must be pushed in piece by piece, so to speak.
Otherwise it will be too long when you put it in.

20,93 Dollar

incl. 19% tax excl. Shipping costs

Screw set for clutch cover KTM 1290 by Evotech Italy

Screw for clutch cover KTM 1290 by Evotech Italy - ORANGE

Aluminium screws M6 for clutch cover KTM 1290 made of Ergal 7075 by Evotech Italy
For use on the original - and on the EVOTECH clutch cover you need the following quantities and dimensions:
3 x 85 mm and 2 x 25 mm
When using the EVOTECH clutch cover protector (PRO-09-01) you need the following quantities and dimensions:
1 x 25 mm, 1 x 30 mm, 2 x 85 mm, 1 x 90 mm
Tightening torques: 8 NM

from 2,78 Dollar

incl. 19% tax excl. Shipping costs

Screw for clutch cover KTM 1290 by Evotech Italy - Black

from 2,78 Dollar

incl. 19% tax excl. Shipping costs

KTM 1290 engine bolt set - 36 pcs. black anodised by Evotech Italy

KTM 1290 engine bolt set M6 - 36 pcs. black anodised by Evotech Italy
Duraluminium screws in Ergal 7075 T6 for the engine.
This kit contains screws of the same length as the original screws.
Please unscrew one original screw at a time and replace it with the duraluminium screw.
Please do not unscrew all screws at once.
It is also recommended to oil or grease the thread of the screws accordingly during assembly.
Tightening torque: 8 NM
Price per screw: 3,02 €

131,89 Dollar

incl. 19% tax excl. Shipping costs

Protection for clutch cover - BLACK - EVOTECH S.R.L

Clutch cover Protection for KTM 1290 - BLACK - EVOTECH S.R.L

Protection for clutch cover - BLACK anodized incl. 2 longer screws.
Fits the original clutch cover and the transparent clutch cover from EVOTECH S.R.L.
CNC milled from aluminium.
HERE there is a matching YOUTUBE video........

48,40 Dollar

incl. 19% tax excl. Shipping costs

Protection for clutch cover - ORANGE - EVOTECH S.R.L

Clutch cover Protection for KTM 1290 - ORANGE - EVOTECH S.R.L

Protection for clutch cover - ORANGE anodized incl. 2 longer screws.
Fits the original clutch cover and the transparent clutch cover from EVOTECH S.R.L.
CNC milled from aluminium.
The colour of the anodisation may change slightly when exposed to heat. This is not a reason for complaint, as it is unavoidable.
HERE there is a matching YOUTUBE video........

48,40 Dollar

incl. 19% tax excl. Shipping costs

KTM 1290 SuperDuke R / GT chainring carrier by EVOTECH Italy - Black

KTM 1290 chainring carrier Super Duke R / GT
CNC made of billet aluminium in Italy. Orange or black anodized for long durability.
Optionally, the matching nut set can be used. The standard nuts also fit.
Only the original chainring carrier is replaced.
The shock absorber is not changed.
The conversion takes about 30 minutes.
Assembly & product video here: YOUTUBE

205,70 Dollar

incl. 19% tax excl. Shipping costs

KTM 1290 R engine guard left - Orange - Evotech S.R.L

Protection for engine cover left - ORANGE anodised incl. 4 longer screws (M6 x 35 mm).
CNC milled from aluminium.
The colour of the anodisation may change slightly when exposed to heat. This is not a reason for complaint, as it is unavoidable.
HERE you can find a YOUTUBE video about it.

191,18 Dollar

incl. 19% tax excl. Shipping costs

KTM 1290 R engine guard left - Black - Evotech S.R.L

Protection for engine cover left - BLACK anodised incl. 4 longer screws (M6 x 35 mm).
CNC milled from aluminium.
HERE you can find a YOUTUBE video about it.

191,18 Dollar

incl. 19% tax excl. Shipping costs

Hook spanner galvanised steel chain tensioner

Tired of getting out the tool kit and putting the tools together every time you want to tighten your chain?
Then this is the right tool for you. Made of 4 mm galvanised steel with a hole for hanging on the tool wall.

26,62 Dollar

incl. 19% tax excl. Shipping costs

Hook spanner Chain tensioner Single-arm swingarm made of STAINLESS STEEL

Tired of getting out the tool kit and putting the tools together every time you want to tighten your chain?
Then this is the right tool for you. Made of 4 mm STAINLESS STEEL with a hole for hanging on the tool wall.
Total length 40 cm
Custom-made for EVOTECHPARTS with engraving - Made in Germany

30,25 Dollar

incl. 19% tax excl. Shipping costs

Chainring carrier KTM 1290 Super Duke R / GT - EVOTECH - Orange

205,70 Dollar

incl. 19% tax excl. Shipping costs

Garmin Navi mount on Evotech Performance bracket system

With this interface plate you can convert your Navi mount (from Evotech Performance) to the Garmin mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Compatible with all Zumo models.
Note: The Garmin Motorcycle Navi is not included.

36,30 Dollar

incl. 19% tax excl. Shipping costs

Quad Lock Interface Plate Navi by Evotech Performance

The kit consists of:
   1 x Quad Lock bracket
    1 x interface plate
    Plus all necessary fittings

This item is only compatible with Evotech Performance pivot style sat nav mounts.
Note: Quad Lock interface smartphone case, connection cable, and smartphone are not included.

38,72 Dollar

incl. 19% tax excl. Shipping costs

BMW / KTM / Yamaha - SP Connect Navigation Mount by Evotech Performance

SP Connect Navigation Mount BMW / KTM / Yamaha - by Evotech Performance - 88 mm

Features of the Evotech Performance SP Connect compatible sat nav mount for the BMW R NineT / KTM 1290 GT
Check if your bike is included at the following link: all MODELS
The distance between the M8 screws is 88 mm centre to centre
    Attaches directly to the centre handlebar clamp with no modifications required
    SP Connect mounting point fully integrated into the bracket
    Wing screws allow screen angle to be changed
    Bracket CNC machined from lightweight aluminium
    Black powder coated for durability
    You can find illustrated online installation instructions here under INSTALLATION

What do you need a motorbike phone mount for?

The Eotech Performance SP Connect-compatible sat nav mount for the BMW R NineT / KTM 1290 GT mounts over the centre handlebar clamp and is in the rider's field of vision for easy navigation while riding. The SP Connect interface allows quick and easy access to your smartphone, while the two-stage locking system secures your phone to the motorbike.   The easy-to-install smartphone GPS mount comes with all the necessary mounting hardware included in the kit.

Note: Our mount works in conjunction with the SP micro stem mount alu #53122 and the anti-vibration module #53135.
SP Connect interface plate #53122, smartphone case, connection cable and smartphone are not included.

66,55 Dollar

incl. 19% tax excl. Shipping costs

USB charger from Evotech Performance

The Evotech Performance Motorcycle USB Charger is a device that supplies power to electronic devices via a USB interface.
Extended range: The 2.2 metre long cable offers a long range so that you can conveniently install and mount the USB charger in different places on your motorbike. This flexibility ensures that the charger can be optimally positioned to be accessible while riding or parking.
Direct connection to the battery or ignition switch: Direct connection to the motorbike battery or ignition switch ensures a stable and reliable power source for the USB charger. However, we recommend connecting a fuse element in between. This direct wiring allows the charger to draw power directly from the motorbike's electrical system, ensuring a consistent and reliable power supply for chargers.
You can find an installation video HERE

35,09 Dollar

incl. 19% tax excl. Shipping costs

EVOTECHPARTS Alloy nut M10x1.25 for chainring carrier KTM 1290 SDR / GT

EP Alloy nut M10x1.25 for chainring carrier KTM 1290 SDR / GT

Aluminium nut set M10x1.25 (6026 T 6 - high strength)
in ORANGE anodised for original chainring carrier or the chainring carrier shown in the other photos.
The price is for 1 nut in orange
For the KTM 1290 SDR / GT
(6 pieces are required)
Tightening torque 45 Nm

6,05 Dollar

incl. 19% tax excl. Shipping costs

TomTom Navi mount on Evotech Performance bracket system

With this interface plate you can convert your Navi mount (from Evotech Performance) to the TomTom mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Note: The TomTom Motorcycle Navi is not included.

36,30 Dollar

incl. 19% tax excl. Shipping costs

Evotech nut set black (6 pcs.) M10x1,25 chainring carrier KTM 1290 SDR / GT

Aluminium nut set M10x1.25 ( Ergal 7075 T 6 - high strength)
in BLACK anodised for original chainring carrier or the chainring carrier shown on the other photos.
For the KTM 1290 SDR / GT
Tightening torque 45 Nm

36,30 Dollar

incl. 19% tax excl. Shipping costs

Evotech nut set RED (6 pcs.) M10x1,25 chainring carrier KTM 1290 SDR / GT

Aluminium nut set M10x1.25 ( Ergal 7075 T 6 - high strength)
in RED anodised for original chainring carrier or the chainring carrier shown on the other photos.
For the KTM 1290 SDR / GT
Tightening torque 45 Nm

36,30 Dollar

incl. 19% tax excl. Shipping costs

Evotech nut set ORANGE (6 pcs.) M10x1,25 chainring carrier KTM 1290 SDR / GT

Aluminium nut set M10x1.25 ( Ergal 7075 T 6 - high strength)
in ORANGE anodised for original chainring carrier or the chainring carrier shown on the other photos.
For the KTM 1290 SDR / GT
Tightening torque 45 Nm

36,30 Dollar

incl. 19% tax excl. Shipping costs

Evotech nut set ORANGE (6 pcs.) M8x1,25 chainring KTM 1290 SDR / GT

Aluminium nut set M8x1.25 ( Ergal 7075 T 6 - high strength)
in ORANGE anodised for the chainring.
For the KTM 1290 SDR / GT
Tightening torque 35 Nm with threadlocker

36,30 Dollar

incl. 19% tax excl. Shipping costs

Evotech nut set BLACK (6 pcs.) M8x1,25 chainring KTM 1290 SDR / GT

Aluminium nut set M8x1.25 ( Ergal 7075 T 6 - high strength)
in BLACK anodised for the chainring.
For the KTM 1290 SDR / GT
Tightening torque 35 Nm with threadlocker

36,30 Dollar

incl. 19% tax excl. Shipping costs

Rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - BLACK - Left

Very high quality duraluminium nut (7075T6) for the left side of the chain wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut left side with 41 mm wrench size.

59,29 Dollar

incl. 19% tax excl. Shipping costs

Rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - BLACK - Right

Rear axle nut in duralumin for KTM 1290/1390 - EVOTECH S.R.L - BLACK - Right

Very high quality duraluminium nut (7075T6) for the right side of the rear wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut right side with 60 mm wrench size.

68,97 Dollar

incl. 19% tax excl. Shipping costs

Rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - Orange - Right

Rear axle nut in duralumin for KTM 1290/1390 - EVOTECH S.R.L - Orange - Right

68,97 Dollar

incl. 19% tax excl. Shipping costs

Rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - Orange - left

Rear axle nut in duralumin for KTM 1290/1390 - EVOTECH S.R.L - Orange - Left

Very high quality duraluminium nut (7075T6) for the left side of the rear wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut left side with 41 mm wrench size.

59,29 Dollar

incl. 19% tax excl. Shipping costs

Oil lock screw - ORANGE - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke

Oil lock screw - ORANGE - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
including sheet metal for receiving the safety wire.
The colour of the anodisation may change slightly when exposed to heat. This is not a reason for complaint, as it is unavoidable.
The rubber seal from the old lock can be reused....... YOUTUBE Video

30,25 Dollar

incl. 19% tax excl. Shipping costs

Oil lock screw - BLACK - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke

Oil lock screw - BLACK - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
including sheet metal for receiving the safety wire. The rubber seal from the old lock can be reused....... YOUTUBE Video

30,25 Dollar

incl. 19% tax excl. Shipping costs

KTM Crash protector on the rear axle from Evotech Performance

Optimal protection for swingarm and fork with a slight fall or overturning of the motorcycle.
Good protection for expensive motorcycle parts. Mounting on the rear wheel axle.
Assembly time approx. 10min. each axis
Weight: 220 grams per axlespare parts.
INSTALLATION

75,02 Dollar

incl. 19% tax excl. Shipping costs

Brake lining Brembo Sinter 07BB2065 - rear wheel

original equipment flooring
Type 50, sintered metal
Design: Brake lining (disc brake)
Brake pad: Sintered metal OEM
width: 50,8 mm
height: 53,7 mm
thickness: 7,4 mm
With ABE
Suitable for the following motorcycles:
FAHRZEUGLISTE

48,40 Dollar

incl. 19% tax excl. Shipping costs

KTM Crash protector on the front axle from Evotech Performance

Optimal protection for swingarm and fork with a slight fall or overturning of the motorcycle.
Suitable for the following MODELS
Good protection for expensive motorcycle parts. Mounting on the front wheel axle.....
INSTALLATION

55,66 Dollar

incl. 19% tax excl. Shipping costs

License plate and reflector mounting kit

Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts

10,89 Dollar

incl. 19% tax excl. Shipping costs

Radiator guard KTM 1290 SuperDuke GT from 2016 - Evotech Performance

Radiator guard SuperDuke GT / Adventure from Evotech Performance

The radiator guard fits exactly on the existing attachment points of your

KTM 1290 SuperDuke GT 2016 +
KTM 1050 Adventure 2015 - 2016
KTM 1090 ADVENTURE Guard 2017 - 2018
KTM 1190 Adventure R 2013 - 2016
KTM 1190 Adventure 2013 - 2016
KTM 1290 Super Adventure 2015 – 16
INSTALLATION

106,48 Dollar

incl. 19% tax excl. Shipping costs

Rectifier protection for KTM 1290 GT from Evotech Performance

EVOTECH PERFORMANCE Rectifier protection for KTM 1290 GT

KTM 1290 GT Evotech Performance has developed a frame cover grid to protect the rectifier.
CNC-machined from aircraft aluminium.
Black powder-coated on the outside.
The protective grille can be installed in a few minutes.
No modification to the motorcycle required.
All fixings are included in the kit.
Suitable from 2016
INSTALLATION

43,56 Dollar

incl. 19% tax excl. Shipping costs

Spare spindle head for Evotech Performance axle protectors

Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.
Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm

12,10 Dollar

incl. 19% tax excl. Shipping costs

Crash protector replacement 60 x 70 mm- Evotech Performance

REPLACEMENT CRASH PROTECTOR EVOTECH PERFORMANCE - 1 Pieces
60 mm x 70 mm

26,62 Dollar

incl. 19% tax excl. Shipping costs

HANDLEBARS END WEIGHTS KTM 1290 - EVOTECH PERFORMANCE

HANDLEBARS END WEIGHTS for KTM 1290 / 790 / 890 / Ducati Monster 1200 from EVOTECH PERFORMANCE

Evotech Performance Handlebars Final weights to combat vibration
These handlebar end weights not only have a higher weight than the original parts (Evotech part 255g per part), but they also provide increased protection for the end of the handlebar in a fall.
Precision CNC machined from high quality stainless steel.
Powder coated in black for increased durability.
Connection diameter: 14 mm
Fitting on these MODELS
Note: This product does not work with KTM hand guards.
delivery : 1 pair
Weight: 510 gram

54,45 Dollar

incl. 19% tax excl. Shipping costs

1 to 54 (from a total of 54)