MAIN PAGE » KTM » KTM 1290 » 1290 R/SE - 2014-16 » Clutch cover Protection for KTM 1290 - ORANGE - EVOTECH S.R.L








Clutch cover Protection for KTM 1290 - ORANGE - EVOTECH S.R.L
Clutch cover Protection for KTM 1290 - ORANGE - EVOTECH S.R.L
- Product No.:
- PRO-09-01/OR-A6
- Shipping time:
-
immediately ready for dispatch (abroad may vary)
- Stock:
- pieces
- Weight:
- 0.21 kg per piece
Protection for clutch cover - ORANGE anodized incl. 2 longer screws.
Fits the original clutch cover and the transparent clutch cover from EVOTECH S.R.L.
CNC milled from aluminium.
The colour of the anodisation may change slightly when exposed to heat. This is not a reason for complaint, as it is unavoidable.
HERE there is a matching YOUTUBE video.
Fits the original clutch cover and the transparent clutch cover from EVOTECH S.R.L.
CNC milled from aluminium.
The colour of the anodisation may change slightly when exposed to heat. This is not a reason for complaint, as it is unavoidable.
HERE there is a matching YOUTUBE video.
- Manufacturer:
SEVENTYONE S.R.L.
Zona Industriale Palù, 6G - 38055 Grigno (TN)
Phone: +39 0461 780184
info@evotech-rc.it
General safety instructions for the product:
We recommend that you always consult a specialist workshop when fitting our products or have this work carried out by a specialist. If you fit it yourself, please make sure that your motorbike is secure and that the product is only intended for your motorbike. The models for which the product is tested and intended can be found with each item.
To avoid damage to your motorbike during installation, we recommend covering all important/sensitive parts. Please understand that we cannot accept any liability for consequential damage caused by improper installation.
When fitting, use threadlocker if possible and observe the torque specifications. The fixing screws on the licence plate holder in particular should be secured with threadlocker. Loss of the licence plate holder due to lost screws can cause unpleasant damage.
General torque specifications can be found HERE
The legally required licence plate angle of 30 degrees can be set on the Italian licence plate holders
Information for our Austrian customers specifically for the type approval and registration of licence plate holders can be found HERE
Unfortunately there are no reviews yet. Be the first who rates this product.
You must be logged in to submit a review. Login
Customers who bought this product bought also the following products:

1290
Aluminium screws M6 for clutch cover KTM 1290 made of Ergal 7075 from Evotech Italy
You will need the following range of screws:
For the standard clutch cover you need: 1 x 90 mm, 2 x 85 mm, 1 x 30 mm, 1 x 25 mm
For additional assembly of PRO-09-01 you need: 2 x 90 mm, 1 x 85 mm, 2 x 30 mm
For the EVOTECH clutch cover you need: 3 x 85 mm, 2 x 25 mm
For additional assembly of PRO-09-01 you need: 1 x 25 mm, 1 x 30 mm, 2 x 85 mm, 1 x 90 mm
1390
Aluminium screws M6 for clutch cover KTM 1390 made of Ergal 7075 from Evotech Italy
You will need the following range of screws:
For the EVOTECH clutch cover you need: 3 x 80 mm, 2 x 25 mm
For additional installation of PRO-09-01 you need: 1 x 25 mm, 1 x 30 mm, 2 x 80 mm, 1 x 85 mm
Tightening torques: 8 NM
Aluminium screws M6 for clutch cover KTM 1290 made of Ergal 7075 from Evotech Italy
You will need the following range of screws:
For the standard clutch cover you need: 1 x 90 mm, 2 x 85 mm, 1 x 30 mm, 1 x 25 mm
For additional assembly of PRO-09-01 you need: 2 x 90 mm, 1 x 85 mm, 2 x 30 mm
For the EVOTECH clutch cover you need: 3 x 85 mm, 2 x 25 mm
For additional assembly of PRO-09-01 you need: 1 x 25 mm, 1 x 30 mm, 2 x 85 mm, 1 x 90 mm
1390
Aluminium screws M6 for clutch cover KTM 1390 made of Ergal 7075 from Evotech Italy
You will need the following range of screws:
For the EVOTECH clutch cover you need: 3 x 80 mm, 2 x 25 mm
For additional installation of PRO-09-01 you need: 1 x 25 mm, 1 x 30 mm, 2 x 80 mm, 1 x 85 mm
Tightening torques: 8 NM
from 2,83 Dollar

The licence plate holder for the KTM 1390 / 990 Duke from Evotech is a high-quality and precisely manufactured solution for motorcyclists who value quality and design. This licence plate holder has been specially developed for the KTM 1390 / 990 Duke and offers a perfect fit that is both functional and aesthetically pleasing.
Made from robust, lightweight aluminium, the holder is highly resistant to the elements, guaranteeing a long service life. The modern, sleek design of the holder blends seamlessly into the appearance of the KTM 1390 / 990 Duke and gives the motorbike a sporty, elegant look.
The Evotech licence plate holder offers simple mounting without drilling holes, making installation quick and uncomplicated. In addition, it is equipped with integrated LED licence plate lighting, which ensures optimum illumination of the licence plate and also complies with legal regulations.
The Evotech licence plate holder sets a new standard for functional motorbike accessories thanks to the use of high-quality materials and sophisticated design. It is not only a practical solution, but also an eye-catcher that enhances the overall appearance of the KTM 1390 / 990 Duke.
The licence plate holder is designed so that the rear light/indicator is retained and no additional wiring is required - a plug-and-play solution.
In addition, a system for extending the indicators has been introduced to accommodate licence plates of different sizes.
If you need a reinforced noble number plate, look HERE
An E-approved licence plate light and a reflector kit are included in the scope of delivery.
You can find the installation instructions for the product HERE
Made from robust, lightweight aluminium, the holder is highly resistant to the elements, guaranteeing a long service life. The modern, sleek design of the holder blends seamlessly into the appearance of the KTM 1390 / 990 Duke and gives the motorbike a sporty, elegant look.
The Evotech licence plate holder offers simple mounting without drilling holes, making installation quick and uncomplicated. In addition, it is equipped with integrated LED licence plate lighting, which ensures optimum illumination of the licence plate and also complies with legal regulations.
The Evotech licence plate holder sets a new standard for functional motorbike accessories thanks to the use of high-quality materials and sophisticated design. It is not only a practical solution, but also an eye-catcher that enhances the overall appearance of the KTM 1390 / 990 Duke.
The licence plate holder is designed so that the rear light/indicator is retained and no additional wiring is required - a plug-and-play solution.
In addition, a system for extending the indicators has been introduced to accommodate licence plates of different sizes.
If you need a reinforced noble number plate, look HERE
An E-approved licence plate light and a reflector kit are included in the scope of delivery.
You can find the installation instructions for the product HERE
330,87 Dollar

Features of the EP radiator guard for KTM 1390 Super Duke R
Lightweight all-aluminium construction
Designed to ensure uninterrupted airflow to the radiator
Hexagonal EP matrix hole pattern provides sturdy protection from rocks and other debris
Durable black powder coating
Can be mounted to the chassis without additional modifications
You can watch the installation instructions as VIDEO here: INSTALLATION
Lightweight all-aluminium construction
Designed to ensure uninterrupted airflow to the radiator
Hexagonal EP matrix hole pattern provides sturdy protection from rocks and other debris
Durable black powder coating
Can be mounted to the chassis without additional modifications
You can watch the installation instructions as VIDEO here: INSTALLATION
107,01 Dollar
This product was added to our catalog on Sunday, February 18, 2018.