MAIN PAGE » DUCATI » Hypermotard 821, 939, 950

Hypermotard 950 SP

You find high-quality accessories here for your Ducati Hypermotard, Hyperstrada 821, 939, 950

Ducati Hypermotard 950 SP Radiator, Engine And Oil Cooler Guard Set 2019+

Ducati Hypermotard 950 Radiator, Engine And Oil Cooler Guard Set 2019+

Evotech Performance radiator, engine and oil cooler guards fit directly onto existing brackets.
No modifications to your motorcycle are necessary.
This guard is CNC machined from aircraft grade aluminum.
The unique design allows airflow through the guard while maintaining a high level of protection.
Black powder-coated for durability.
All necessary fixings are included in the kit.
Fits Ducati Hypermotard 950 / SP / RVE from 2019+
INSTALLATION 1
INSTALLATION 2
INSTALLATION 3

299,00 Dollar

incl. 19% tax excl. Shipping costs

Ducati Hypermotard 950 SP license plate holder from Evotech Performance from 2019

Ducati Hypermotard 950, 950 SP, 950 RVE license plate holder from Evotech Performance from 2019

Evotech Performance has designed and manufactured a short license plate holder that is fully integrated into the sporty line of the Hypermotard 950 SP.
Our engineers have milled the turn signal holders and the main body from billet aluminium, which allows the wires to be completely concealed.
This gives it an ultra-clean finish.
The Evotech Performance number plate holder fits directly onto the original Ducati mounting points...........
INSTALLATION

296,40 Dollar

incl. 19% tax excl. Shipping costs

Ducati Hypermotard, Supersport, Diavel, Monster Wasserkühlerschutz ab 2013

Ducati Hypermotard, Diavel, Supersport, Monster water cooler protection from 2013 onwards

Evotech Performance Radiator Fittings fit directly onto existing brackets.
No modifications to your motorbike are required.
This guard is CNC machined from aircraft grade aluminium.
The unique design allows airflow through the guard while maintaining a high level of protection.
Powder coated black for durability.
All necessary fixings are included in the kit.
Fits the following Ducati MODELS
INSTALLATION 1

132,60 Dollar

incl. 19% tax excl. Shipping costs

Ducati Hypermotard 950 Hand Guard Protectors 2019+

Evotech Performance has produced a set of handguards for the Hypermotard range of Ducati motorbikes.
These hand guards not only add increased protection to the OEM parts, but also offer increased weight right to the end of the handlebars (OEM part 400g per set, Evotech part 1104g per set). CNC machined from billet aluminium.
Finished with a durable black powder coating for a long life.
Mounted using existing attachment points.
No modifications to your motorbike are necessary.
All fixings are supplied with the kit.
INSTALLATION

219,70 Dollar

incl. 19% tax excl. Shipping costs

Ducati Hypermotard 821, 939, 950 Crash Protektor

Evotech Performance has designed and manufactured impact protectors for the Ducati Hypermotard 821, 939, 950, which are very easy to fit.
Simply attach them to the existing mounting points of your motorcycle.
No changes are necessary.
The mounts are CNC machined from aircraft grade aluminum and powder coated black on the outside for long life.
The axle is made of stainless steel.
INSTALLATION

135,20 Dollar

incl. 19% tax excl. Shipping costs

Ducati Monster Hypermotard Rear Wheel Axle Protector from 2021 by Evotech Performance

Ducati Monster Rear Wheel Axle Protector from 2021 by Evotech Performance

The most important features of the rear wheel axle protector for the Monster, Hypermotard 698, Panigale V2, Streetfighter V2
You can find an overview of which motorbike this protector fits here: MODEL
    Aluminium spacer with nylon crash cap
    Stainless steel spindle rod fits through the rear wheel axle
    Protects the swingarm and sprocket carrier.
    Manufactured to the highest standards by Evotech Performance
    Replacement heads can be purchased separately in case you have a crash.

62,40 Dollar

incl. 19% tax excl. Shipping costs

Front axle protection Ducati from Evotech Performance

Optimal protection for swingarm or fork with a slight fall or overturning of the motorcycle.
Good protection for expensive motorcycle parts. Mounting on the front wheel axle.
Assembly time approx. 10min. each axis
Weight: 220 grams per axlespare parts.
Suitable for the following models
INSTALLATION

62,40 Dollar

incl. 19% tax excl. Shipping costs

Rear axle protection Ducati from Evotech Performance

Optimal protection for swingarm or fork with a slight fall or overturning of the motorcycle.
Good protection for expensive motorcycle parts. Mounting on the rear wheel axle.
Assembly time approx. 10min. each axis
Weight: 220 grams per axlespare parts.
Suitable for the following models
INSTALLATION

76,70 Dollar

incl. 19% tax excl. Shipping costs

Ducati Hypermotard 950 chainring carrier - 5 hole - black

CNC machined sprocket carrier for Ducati Hypermotard 950, featuring an angular and attractive look.
It is made of Ergal 7075-T6 and manufactured on a 5-axis multitasking machining centre.
It allows for a lighter weight and increases mechanical strength compared to the original product.
Available with anodic surface treatment in different colours (red and black).

221,00 Dollar

incl. 19% tax excl. Shipping costs

Handlebar end weights aluminium universal in red by Evotech Italy

Handlebar end weights milled from special aluminium. They have an innovative design down to the last detail. The mounting point corresponds to that of the original. For this reason, fitting is very easy and quick. The screws are made of light but high-strength duraluminium and anodised in the same colour as the bar end weights.
Including several adapters and bushings to be able to use an inner diameter of 12.5 to 16.5 mm.

39,00 Dollar

incl. 19% tax excl. Shipping costs

Rear wheel axle guard Ducati replacement head

Rear wheel axle guard Ducati replacement head
Suitable for the following MODELS

23,40 Dollar

incl. 19% tax excl. Shipping costs

Oil filler plug Honda,Ducati,Kawasaki,Triumph,Yamaha M20 x 2.5 from Evotech Italy

Evotech oil filler plugs are milled from solid aluminium. The special aluminium alloy makes the screw stable and firm. The special hexagon reduces the risk of theft. Radial holes, with which the filler plug can be protected against opening with safety wire, as required in racing. Special O-ring that is more resistant to oil, vapour and temperature.

31,20 Dollar

incl. 19% tax excl. Shipping costs

Handlebar end mirrors from Evotech Performance

Main features of the Evotech handlebar end mirrors:
Suitable for the following MODELS
You can find an installation video here: INSTALLATION

    Modernised design of the classic ‘round’ handlebar end mirror
    The mirror can be swivelled backwards for optimum visibility
    Convex shape of the mirror glass for 2x magnification
    Aluminium mirror shaft is adjustable in position
    Internal collet mounting mechanism is model-specific, not universally applicable
    High-quality, injection-moulded nylon mirror housing with Evotech performance logos
Scope of delivery: 1 pair
    Glass diameter: 85 mm with an area of 56.72 cm² (not permitted in many countries)

RRP 370,50 Dollar
Only 258,70 Dollar

incl. 19% tax excl. Shipping costs

KTM, Ducati, Husqvarna Brake and Clutch Lever Protector Kit from Evotech Performance

Evotech Performance has produced a brake and clutch lever protection kit for KTM, Ducati, Husqvarna... Husqvarna. Please check here if your bike is included: All MODELS.
The protectors are held in place with our unique machined cartridge expansion system.
CNC machined from aircraft grade aluminium and stainless steel.
No modifications are required to your bike.
Finished with a durable black powder coat for durability.
All fixings are supplied with the kit.

253,50 Dollar

incl. 19% tax excl. Shipping costs

KTM, Ducati, Husqvarna handlebar end weights ROAD from Evotech Performance

Features of the Evotech Performance handlebar end weights (ROAD) for various Ducati , KTM, Husqvarna Models.
Suitable for the following MODELS

    Direct replacement for original left and right handlebar weights
    CNC-machined from stainless steel, including all necessary fastening elements
    Unique EP mounting design for a simple but very secure installation
    EP's Touring Option, the higher handlebar end weight offered by Evotech Performance
    Additional weight supports the reduction of high-frequency vibrations
    Discreet, elegant design with EP logos and aesthetics

113,10 Dollar

incl. 19% tax excl. Shipping costs

Evotech action/security camera front mudguard mount

Features of the EP action/safety camera mount - or: How to turn your bike into a director.
Check the following link from the manufacturer to see if your motorbike is included: MODELS

yes Flexible like a yoga master - thanks to the horizontal pivot point, you can adjust the camera perfectly in no time at all.
angel Mounting without drama - simply attaches to the front mudguard bracket.
enlightened Screws instead of bolts - no drilling, no fiddling, your motorbike remains undamaged.
mail Instructions for everyone - with pictures so that even those who don't like screwing can understand how it's done: INSTALLATION

87,10 Dollar

incl. 19% tax excl. Shipping costs

TomTom compatible handlebar clamp nav mount - Aprilia - Ducati - Honda 79 mm

Features of the EP TomTom compatible nav mount for the Aprilia, Honda, Ducati.
The distance between the M8 screws is 79 mm centre to centre.
Suitable on the following MODELS
    Designed to fit perfectly with the TomTom mounting system
    Places a TomTom sat nav centrally in front of the rider
    Bracket is mounted on the handlebar clamp
    Adjustable horizontal pivot point for good visibility
    Fully compatible with TomTom anti-theft lock. Part no. 9uge.001.06
    Online step-by-step installation instructions is available here: INSTALLATION

What is a motorcycle navigation device mount?
Made of lightweight aluminum and reinforced with a black powder coat finish, the nav mount simply attaches to your existing handlebar clamp.   EP's mounting plate is designed to fit snugly on the TomTom mounting system, and all other necessary parts are included in the kit. It mounts centrally near the screen for easy access to the nav and other TomTom features while riding.
Note: TomTom motorcycle navi not included

76,70 Dollar

incl. 19% tax excl. Shipping costs

Quad Lock Compatible Navi Holder from Evotech Performance 79 mm

The features of the Evotech Performance Quad Lock compatible nav mount
On which motorcycles this holder fits exactly, you can find here: MODELS
The distance between the M8 screws is 79 mm centre to centre.
    Places a smartphone centrally in front of the rider
    Is attached with the handlebar clamp
    Quad Lock mounting point already integrated in the Evotech Performance mount
    Compatible with all Quad Lock motorcycle mounts and Quad Lock motorcycle accessories
    All other mounting hardware is included in the kit
    Adjustable horizontal pivot point for easy viewing

91,00 Dollar

incl. 19% tax excl. Shipping costs

Reinforced number plate made of DIBOND® material 180 x 200 mm

Reinforced number plate (D) 180 x 200 mm made of DIBOND® material

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm

The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.

The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT

16,90 Dollar

incl. 19% tax excl. Shipping costs

Garmin compatible navigation holder Evotech Performance 79 mm

Features of the Evotech Performance Garmin compatible nav mount for the Ducati Hypermotard 950, Aprilia 660, Aprilia V4 1100
See MODELS to see if this nav mount fits your bike
The distance between the M8 screws is 79 mm centre to centre.
Here is a VIDEO about it

    Partially CNC-milled from lightweight aluminium
    Attaches directly to the centre handlebar clamp with no modifications required
    Powder coated black for durability
    Keeps your Garmin sat nav securely in view
    Adjustable horizontal pivot point for easy visibility

What is a motorbike sat nav mount?

The EP Garmin compatible sat nav mount is placed in the rider's peripheral field of vision to help you find your way while riding.   The mount is easy to fit with the help of our instructions and attaches to the handlebar centre clamp with all standard fasteners.   The Garmin motorbike sat nav can then be mounted in your field of vision and adjusted with the thumbscrew behind the screen.
INSTALLATION

Garmin motorbike navigator not included.   Compatible with all Zumo models.

76,70 Dollar

incl. 19% tax excl. Shipping costs

Front brake caliper bolt set (Race) from Evotech Performance

Front brake caliper bolt set (Race) from Evotech Performance
Shank length : 55 mm
Suitable for the following MODELS

- Manufactured in-house by Evotech Performance
- Stainless steel brake calliper bolts with hexagon head: direct replacement for the original bolts
- EP's model specific design replicates bolt length, thread and thread pitch for a secure fit
- 316 austenitic stainless steel (marine grade) for exceptional corrosion resistance
- Pre-drilled hex head for safety wire (lockwire)
- 12mm hex head
- Flanged bolt head provides secure bearing surface
- Evotech front brake caliper bolt kit includes all required bolts for direct replacement of OE parts
- Independently tested to ISO 3506 by a UKAS ISO 17025 accredited test centre

74,10 Dollar

incl. 19% tax excl. Shipping costs

Front brake caliper bolt set (Street) from Evotech Performance

Front brake caliper bolt set (Street) from Evotech Performance
Shank length : 55 mm
Suitable for the following MODELS

- Manufactured in-house by Evotech Performance
- Stainless steel caliper bolts with round head: direct replacement for original bolts
- EP's model specific design replicates bolt length, thread and pitch for a secure fit
- 316 austenitic stainless steel (marine grade) for exceptional corrosion resistance
- Rolled threads for increased durability
- 8mm Allen key head
- The Evotech front brake caliper bolt set provides a complete set of bolts for your motorbike
- Independently tested to ISO 3506 by a UKAS ISO 17025 accredited test centre

63,70 Dollar

incl. 19% tax excl. Shipping costs

6 Aluminium screws M5 x 30 for the tank cap KTM 1290 made of Ergal 7075 by Evotech Italy

Aluminium screws M5 x 30 for the tank cap KTM 1290 made of Ergal 7075 by Evotech Italy
Tightening torque: 5 NM
Also fits Ducati Multistrada 1200/1260 and Hypermotard 950

16,90 Dollar

incl. 19% tax excl. Shipping costs

KTM 1290 / Ducati Streetfighter / Panigale hook spanner galvanised steel chain tensioner

steel Hook spanner galvanised chain tensioner

Tired of getting out the tool kit and putting the tools together every time you want to tighten your chain?
Then this is the right tool for you. Made of 4 mm galvanised steel with a hole for hanging on the tool wall.
Total length 40 cm
With EVOTECHPARTS engraving - Made in Germany

RRP 28,60 Dollar
Only 22,75 Dollar

incl. 19% tax excl. Shipping costs

Hook spanner Chain tensioner Single-arm swingarm made of STAINLESS STEEL

STAINLESS STEEL Hook spanner Chain tensioner Single-arm swingarm

Tired of getting out the tool kit and putting the tools together every time you want to tighten your chain?
Then this is the right tool for you. Made of 4 mm STAINLESS STEEL with a hole for hanging on the tool wall.
Total length 40 cm
With EVOTECHPARTS engraving - Made in Germany

32,50 Dollar

incl. 19% tax excl. Shipping costs

Beeline Moto2 compatible sat nav holder from Evotech Performance - 79 mm

Beeline Moto2 compatible sat nav mount from Evotech Performance - with 79 mm centre-to-centre bolt spacing
Fits the following MODELS
Places a Beeline Moto 2 centrally in front of the rider
Attaches with the handlebar clamp
Beeline Moto 2 mounting point already integrated in the EP mount
Compatible with all Beeline Moto 2 motorbike mounts and Beeline Moto 2 motorbike accessories
All other mounting parts included in the kit
Adjustable horizontal pivot point for easy viewing

76,70 Dollar

incl. 19% tax excl. Shipping costs

Fuel filler cap set KTM 1290, Ducati Multistrada 1200/1260, Hypermotard 950 by Evotech Italy

Fuel filler cap made of CNC machined aluminium by EVOTECH Italy . This product simply replaces the aesthetic part of the original fuel filler cap while maintaining its original functional components.
Fits:
KTM 1290 R year of construction 2014 - 2016
Ducati Multistrada 1200/1260
Hypermotard 950

227,50 Dollar

incl. 19% tax excl. Shipping costs

SP Connect Navigation Mount by Evotech Performance

Features of the Evotech Performance SP Connect compatible sat nav mount
Suitable for the following MODELS
    Attaches directly to the centre handlebar clamp with no modifications required
    SP Connect mounting point fully integrated into the bracket
    Wing screws allow screen angle to be changed
    Bracket CNC machined from lightweight aluminium
    Black powder coated for durability
    You can find illustrated online installation instructions here under INSTALLATION

What do you need a motorbike phone mount for?

The Eotech Performance SP Connect-compatible sat nav mount mounts over the centre handlebar clamp and is in the rider's field of vision for easy navigation while riding. The SP Connect interface allows quick and easy access to your smartphone, while the two-stage locking system secures your phone to the motorbike.   The easy-to-install smartphone GPS mount comes with all the necessary mounting hardware included in the kit.

Note: Our mount works in conjunction with the SP micro stem mount alu #53122 and the anti-vibration module #53135.
SP Connect interface plate #53122, smartphone case, connection cable and smartphone are not included.

76,70 Dollar

incl. 19% tax excl. Shipping costs

USB A charger from Evotech Performance

The Evotech Performance Motorcycle USB Charger is a device that supplies power to electronic devices via a USB interface.
This article is equipped with USB A connection. With USB C connection you can find HERE
Extended range: The 2.2 metre long cable offers a long range so that you can conveniently install and mount the USB charger in different places on your motorbike. This flexibility ensures that the charger can be optimally positioned to be accessible while riding or parking.
Direct connection to the battery or ignition switch: Direct connection to the motorbike battery or ignition switch ensures a stable and reliable power source for the USB charger. However, we recommend connecting a fuse element in between. This direct wiring allows the charger to draw power directly from the motorbike's electrical system, ensuring a consistent and reliable power supply for chargers.
You can find an installation video HERE

41,60 Dollar

incl. 19% tax excl. Shipping costs

Rear axle nut in duralumin for Hypermotard 950 - EVOTECH S.R.L - BLACK - Left

Hypermotard 950 Rear axle nut in duralumin - EVOTECH S.R.L - BLACK - Left

Very high quality duraluminium nut (7075T6) for the left side of the chain wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut left side with 41 mm wrench size.

63,70 Dollar

incl. 19% tax excl. Shipping costs

Brake caliper protection for Brembo brake calipers from Evotech Performance

Brake caliper protection for Brembo brake calipers black/red from Evotech Performance - Front

Evotech Performance has designed and manufactured a protection to protect your Brembo brake calipers.
These brake caliper protectors can be fitted to your motorcycle without any modifications.
CNC machined from aircraft grade aluminium.
Finished with a durable black powder coating.
All necessary fixings are supplied with the kit.
Delivered are 1 pair for 2 brake calipers
INSTALLATION
Suitable for the following motorcycles: HERE

57,20 Dollar

incl. 19% tax excl. Shipping costs

Brake lining Brembo Sinter 07BB2065 - rear wheel

original equipment flooring
Type 50, sintered metal
Design: Brake lining (disc brake)
Brake pad: Sintered metal OEM
width: 50,8 mm
height: 53,7 mm
thickness: 7,4 mm
With ABE
Suitable for the following motorcycles:
FAHRZEUGLISTE

52,00 Dollar

incl. 19% tax excl. Shipping costs

License plate and reflector mounting kit

Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts

15,60 Dollar

incl. 19% tax excl. Shipping costs

Spare spindle head for Evotech Performance axle protectors

Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.
Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm

13,00 Dollar

incl. 19% tax excl. Shipping costs

Crash protector replacement 60 x 70 mm- Evotech Performance

REPLACEMENT CRASH PROTECTOR EVOTECH PERFORMANCE - 1 Pieces
60 mm x 70 mm
If you would like the same product with an additional camera mount, please see HERE

29,90 Dollar

incl. 19% tax excl. Shipping costs

1 to 35 (from a total of 35)

You find high-quality accessories here for your Ducati Hypermotard, Hyperstrada 821, 939, 950