MAIN PAGE » KTM » KTM 1290 » 1290 R/SE - 2014-16 » Fuel filler cap set KTM 1290, Ducati Multistrada 1200/1260, Hypermotard 950 by Evotech Italy
Fuel filler cap set KTM 1290, Ducati Multistrada 1200/1260, Hypermotard 950 by Evotech Italy
Fuel filler cap made of CNC machined aluminium by EVOTECH Italy . This product simply replaces the aesthetic part of the original fuel filler cap while maintaining its original functional components.
This Evotech product gives your tank a remarkable aesthetic appeal without sacrificing the safety and convenience of opening it with the original motorbike key.
In addition, this new system allows you to keep the original ventilation and vapour recovery system, providing additional security for your fuel cap.
The Evotech fuel cap has some raised parts on the side of the lock making it suitable for track use.
Fits:
KTM 1290 R year of construction 2014 - 2016
Ducati Multistrada 1200/1260
Hypermotard 950
The scope of delivery includes the outer ring and the inner cover with lock cover. The lock and the innards can be used from the original cover. Assembly time approx. 20 minutes. All you need is a Phillips screwdriver and a 4 mm Allen key for the replacement. The 6 black aluminium screws are also available from us via this LINK
This Evotech product gives your tank a remarkable aesthetic appeal without sacrificing the safety and convenience of opening it with the original motorbike key.
In addition, this new system allows you to keep the original ventilation and vapour recovery system, providing additional security for your fuel cap.
The Evotech fuel cap has some raised parts on the side of the lock making it suitable for track use.
Fits:
KTM 1290 R year of construction 2014 - 2016
Ducati Multistrada 1200/1260
Hypermotard 950
The scope of delivery includes the outer ring and the inner cover with lock cover. The lock and the innards can be used from the original cover. Assembly time approx. 20 minutes. All you need is a Phillips screwdriver and a 4 mm Allen key for the replacement. The 6 black aluminium screws are also available from us via this LINK
- Manufacturer:
SEVENTYONE S.R.L.
Zona Industriale Palù, 6G - 38055 Grigno (TN)
Phone: +39 0461 780184
info@evotech-rc.it
General safety instructions for the product:
We recommend that you always consult a specialist workshop when fitting our products or have this work carried out by a specialist. If you fit it yourself, please make sure that your motorbike is secure and that the product is only intended for your motorbike. The models for which the product is tested and intended can be found with each item.
To avoid damage to your motorbike during installation, we recommend covering all important/sensitive parts.
When fitting, use threadlocker if possible and observe the torque specifications. The fixing screws on the licence plate holder in particular should be secured with threadlocker. Loss of the licence plate holder due to lost screws can cause unpleasant damage.
General torque specifications can be found HERE
The legally required licence plate angle of 30 degrees can be set on the Italian licence plate holders
Information for our Austrian customers specifically for the type approval and registration of licence plate holders can be found HERE
Unfortunately there are no reviews yet. Be the first who rates this product.
You must be logged in to submit a review. Login
This product was added to our catalog on Tuesday, December 28, 2021.