MAIN PAGE » DUCATI » Streetfighter V2

Streetfighter V2

Noble accessories for your Streetfighter V2 from 2022 you will find here

Ducati Panigale V4 , R, S, S Corse from 2018, Streetfighter V2 from 2022 license plate holder from Evotech Performance

This license plate holder from EVOTECH PERFORMANCE for your DUCATI PANIGALE from 2018 and Streetfighter V2 from 2022 is CNC machined from lightweight aircraft aluminum.
Finished with a tough satin black powder coat.
Fits on:
Panigale V4 2018+, V4 S 2018+, V4 Speciale 2018+, V4 R 2019+, V4 S Corse 2019 +, V2 2020+.
Streetfighter V2 from 2022
The original turn signals and license plate lighting can still be used.
This license plate holder was developed especially for the existing holders on your DUCATI Panigale / Streefighter and does not require any changes on your motorcycle.
No changes to the wiring are necessary, just plug and play.
All necessary mountings are included in the delivery.
The licence plate angle is approx. 40 degrees. The reflector kit is included
An easy to understand illustrated manual is available here: INSTALLATION

322,50 Dollar

incl. 19% tax excl. Shipping costs

Replacement plate for license plate holder KTM - DUCATI

Replacement plate (made of 4 mm material) for license plate holder KTM 1290 Super Duke R from 2020 and Streetfighter/Pannigale V4 / V2 from 2020.
The angle should be adjusted according to the legal conditions.

25,00 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V2 Radiator Protection Set 2022+ Evotech Performance

Thanks to Evotech's ingenious design, the upper radiator guard can be mounted without removing the fairings.
The elegantly designed matrix features hexagonal holes to optimize airflow while providing maximum protection from road debris.
The radiator protection kit for the Ducati Streetfighter V2 from 2022 features a remarkable strength-to-weight ratio, weighing in at under 350 grams complete.
CNC machined from aircraft grade aluminum and stainless steel.
No modifications are required to your Ducati V2 Streetfigher.
The black powder coat finish ensures durability.
All mounting hardware is included with the kit.
You can view easy to follow, illustrated instructions here: INSTALLATION

173,75 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V2 passenger rest cover plate 2022+ from Evotech Performance

The Evotech Performance pillion footrest removal plate attaches to your motorcycle at the existing mounting points.
Simply remove the pillion footpegs and install this pillion plate as a cover for a clean racing look.
No modifications to your motorcycle are required.
CNC machined from aircraft grade aluminum.
Powder coated black for durability.
All necessary fasteners are included with the kit.
Easy to follow, illustrated instructions are available for download: INSTALLATION

83,75 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter V2 / V4 SP Connect kompatible Navi Halterung Evotech Performance

Features of the Evotech Performance SP Connect compatible sat nav mount for the Ducati Streetfighter V4 and V2 from 2020 onwards.

    Places a smartphone centrally in front of the rider
    Attaches via the handlebar clamp
    SP Connect mounting point already integrated in the EP mount
    All other mounting parts are included in the kit
    Adjustable horizontal pivot point for good visibility

What is a motorbike phone mount?

To access your smartphone while riding for applications such as audio and GPS, Evotech Performance has developed the SP Connect compatible navi mount. Made from lightweight aluminium and reinforced with EP's signature black powder coating, the mount can be attached to the handlebar clamp using the online step-by-step instructions.   With the SP Connect mounting point already attached, the rider can secure their smartphone in their chosen SP Connect smartphone case.
INSTALLATION

67,50 Dollar

incl. 19% tax excl. Shipping costs

Ducati Streetfighter, Hypermotard, Diavel brake and clutch lever protector kit 2020+

Evotech Performance has produced a brake and clutch lever protection kit for the Streetfighter, Hypermotard, Diavel. Fits the following MODELS.
Protectors are held in place with our unique machined cartridge expansion system.
CNC machined from aircraft grade aluminum and stainless steel.
No modifications are required to your bike.
Finished with a durable black powder coat for durability.
All fasteners are included with the kit.
INSTALLATION

222,50 Dollar

incl. 19% tax excl. Shipping costs

Ducati rear wheel axle protection protector EVOTECH PERFORMANCE

The characteristics of the rear wheel axle protection for the Ducati
Fits the following Ducatis: All models

    Protects the swing arm and the sprocket
    Injection molded nylon coil with an aluminum carrier
    Stainless steel spindle rod with roller thread
    Red anodized hub stop for the outlet side
    Easy installation due to the rear wheel axle
    Spare coil heads can be purchased separately
INSTALLATION

73,75 Dollar

incl. 19% tax excl. Shipping costs

Ducati front wheel axle protection protector from Evotech Performance

Optimal protection for the fork in case of a slight fall or tipping over of the bike.
Good protection for expensive motorcycle parts. Mounting on the front wheel axle. 8mm rod with M8 thread.
Assembly time approx. 10min. per axle
Weight: 220 grams per axle
Fitting.....
INSTALLATION

57,50 Dollar

incl. 19% tax excl. Shipping costs

Garmin Navi mount on Evotech Performance bracket system

With this interface plate you can convert your Navi mount (from Evotech Performance) to the Garmin mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Compatible with all Zumo models.
Note: The Garmin Motorcycle Navi is not included.

37,50 Dollar

incl. 19% tax excl. Shipping costs

SP Connect Navigation Interface Plate from Evotech Performance

This interface plate allows you to convert your Evotech Performance nav mount to the SP Connect mount system.
The mounts are machined from lightweight aluminium and feature EP's signature black powder coating.
The kit consists of:

    1 x interface plate
    1 x pivot plate
    Plus all necessary fixings

This item is only compatible with Evotech Performance pivot style sat nav mounts.
Note: Our mount works in conjunction with SP micro stem mount alu #53122 and anti-vibration module #53135.
SP Connect interface plate #53122, smartphone case, connection cable and smartphone are not included.

37,50 Dollar

incl. 19% tax excl. Shipping costs

TomTom Navi mount on Evotech Performance bracket system

With this interface plate you can convert your Navi mount (from Evotech Performance) to the TomTom mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Note: The TomTom Motorcycle Navi is not included.

37,50 Dollar

incl. 19% tax excl. Shipping costs

Ultimate Addons Navigation Interface Plate from Evotech Performance

With our interface plate you can convert your Evotech Performance nav mount to the Ultimate Addons mount system.
The kit consists of:
    1 x interface plate
    1 x pivot plate
    Plus all necessary connections
This item is only compatible with Evotech Performance pivot style navi mounts.
Note: Smartphone, connection cable, Ultimateaddons 3-pin adapter plate and smartphone case are not included.

40,00 Dollar

incl. 19% tax excl. Shipping costs

Plate Illumination EVOTECH with LED

EVOTECH LED license plate light with 4 mm thread
Cable length 30 cm

22,50 Dollar

incl. 19% tax excl. Shipping costs

Reinforced number plate made of ALUCOBOND® material 180 x 200 mm

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light ALUCOBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.
The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
We stuck the number plate with mirror tape with 3 strips. Optically perfect and holds.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.

16,25 Dollar

incl. 19% tax excl. Shipping costs

Spare spindle head for Evotech Performance axle protectors

Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.
Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm

10,00 Dollar

incl. 19% tax excl. Shipping costs

1 to 15 (from a total of 15)