MAIN PAGE » YAMAHA

YAMAHA

Yamaha MT 10 / FZ-10 licence plate holder from 2016 / 2017 Evotech Performance

Evotech Performance has designed and manufactured a short number plate holder for the Yamaha FZ-10 (from 2017) and MT 10 (from2016).
CNC machined from lightweight aircraft grade aluminium.
Finish with hard matte black powder coating.
The scope of delivery includes a new LED number plate light.
The standard turn signals can be used.
No wiring changes are required, just plug in and go.
All necessary fixings are supplied in the kit.
INSTALLATION

155,25 Dollar

incl. 19% tax excl. Shipping costs

Yamaha FZ-10 / MT-10/ MT-10 SP - Water / oil cooler protection from 2016 Evotech Performance

Evotech Performance Water Cooler Oil Cooler Kits for the Yamaha FZ-10 / MT-10/ MT-10 SP - Water / oil cooler guards attach to the motorbike at the existing mounting points without modification.
No cable ties are used to mount this product.
CNC machined from aircraft grade aluminium.
Finished with a durable black powder coat.
The Yamaha FZ-10 / MT-10/ MT-10 SP radiator guard kit includes all necessary mounting hardware.

168,75 Dollar

incl. 19% tax excl. Shipping costs

YAMAHA YZF-R1, FZ-10, MT-10 Carbon fibre toe guards Evotech Performance

Evotech Performance has produced a carbon fibre toe guard for various Yamahas.
The Yamaha Carbon Fibre Footpeak Protector is machined from carbon fibre.
All fixings required are included in the kit.
Supplied is 1 toe guard as shown above left.

RRP 74,25 Dollar
Only 60,75 Dollar

incl. 19% tax excl. Shipping costs

Yamaha FZ, YZF, MT Rear Axle Protection from Evotech Performance

Main features of the EP rear wheel spindles for the Yamaha FZ, YZF R1, MT
Suitable for the following Models
    Plugs through the rear wheel spindle
    Easy to fit
    Stainless steel spindle rod
    Injection moulded nylon spool heads with aluminium internals
    Nylon spool heads are sold separately
INSTALLATION

56,70 Dollar

incl. 19% tax excl. Shipping costs

Yamaha FZ, YZF, MT front Axle Protection from Evotech Performance

Main features of the EP front wheel spindles for the Yamaha FZ, YZF R1, MT
Fits the following Models
    Plugs through the front wheel spindle
    Easy to fit
    Stainless steel spindle rod
    Injection moulded nylon spool heads with aluminium internals
    Nylon spool heads are sold separately
INSTALLATION

56,70 Dollar

incl. 19% tax excl. Shipping costs

Reinforced number plate made of ALUCOBOND® material 180 x 200 mm

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light ALUCOBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.
The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
We stuck the number plate with mirror tape with 3 strips. Optically perfect and holds.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.

16,20 Dollar

incl. 19% tax excl. Shipping costs

Show 1 to 6 (from a total of 6 products)

YAMAHA