GSX R1000R

SUZUKI GSX R1000R water / oil cooler protection set 2017+
-8%
SUZUKI GSX R1000R water / oil cooler protection set 2017+
This radiator guard from EVOTECH Performance fits exactly on the standard mounting points on your
Suzuki GSX R1000 and Suzuki GSX R 1000R from model 2017
Installation guide
RRP 168,75 Dollar
Only 155,25 Dollar
incl. 19% tax excl. Shipping costs
License plate holder Suzuki GSX-R 1000 / R ab 2017 from Evotech
License plate holder Suzuki GSX-R 1000 / R ab 2017 from Evotech
EVOTECH license plate holder suitable for the following models:
Suzuki GSX-R 1000 / R from 2017
This short license plate holder has been developed by Evotech especially for your Suzuki GSX-R 1000 / R from 2017 to make it look even better.
INSTALLATION
171,45 Dollar
incl. 19% tax excl. Shipping costs
Garmin Navi mount on Evotech Performance bracket system
NEW
Garmin Navi mount on Evotech Performance bracket system
With this interface plate you can convert your Navi mount (from Evotech Performance) to the Garmin mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate  
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Compatible with all Zumo models.
Note: The Garmin Motorcycle Navi is not included.
40,50 Dollar
incl. 19% tax excl. Shipping costs
TomTom Navi mount on Evotech Performance bracket system
NEW
TomTom Navi mount on Evotech Performance bracket system
With this interface plate you can convert your Navi mount (from Evotech Performance) to the TomTom mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate  
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Note: The TomTom Motorcycle Navi is not included.
40,50 Dollar
incl. 19% tax excl. Shipping costs
Bremsbelag Brembo SA Sinter 07BB37SA - Front Site
TOP
-8%
Bremsbelag Brembo SA Sinter 07BB37SA - Front Site
Design: Brake lining (disc brake)
Brake lining: Sintered metal road
width: 102,2 mm
height: 42 mm
thickness: 7,7 mm
Suitable for the following motorcycles:
VEHICLE LIST
RRP 66,15 Dollar
Only 60,75 Dollar
incl. 19% tax excl. Shipping costs
License plate and reflector mounting kit
License plate and reflector mounting kit
Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts
10,80 Dollar
incl. 19% tax excl. Shipping costs
Reinforced number plate made of ALUCOBOND® material 180 x 200 mm
Reinforced number plate made of ALUCOBOND® material 180 x 200 mm
Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light ALUCOBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.
The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
We stuck the number plate with mirror tape with 3 strips. Optically perfect and holds.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
16,20 Dollar
incl. 19% tax excl. Shipping costs
Spare spindle head for Evotech Performance axle protectors
Spare spindle head for Evotech Performance axle protectors
Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.
Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm
10,80 Dollar
incl. 19% tax excl. Shipping costs
1 to 8 (from a total of 8)