MAIN PAGE » TRIUMPH » Scrambler 1200 » Paddock / mounting stand mount from Evotech Performance

Paddock / mounting stand mount from Evotech Performance

Features of Evotech Performance paddock / kickstand mount
Suitable for the following MODELS

    Rear wheel stand spools suitable for C- or V-Cup kickstands
    Injection moulded black nylon spools with a stainless steel inner bushing
    The race-proven hourglass shape offers a secure hold
    Aluminium spacers for a precise fit on your bike
    Mounts to the existing mounting points on the swingarm
    All required fixings, including the mounting bolts, are included in the kit
    You can find an installation guide here: INSTALLATION

With the paddock / assembly stand mount you can maintain your bike at home and store it upright. These injection-moulded nylon spools, which carry a stainless steel inner bushing, are quickly attached to the mounting points added during the manufacture of the swingarm. The durable materials are moulded in an hourglass shape to securely receive and hold a set of C or V type paddock stands for short term maintenance or long term storage.

Note: EP Paddock Stand Bobbins are only designed to support the weight of the motorbike. They are not designed to support the additional weight of a person sitting on the motorbike.
All intellectual property rights belong to Drury Precision Engineering Limited. Any infringement will be vigorously pursued. The brand name Evotech Performance® and the EP® logo

Products Safety/TÜV

Product safety :: Manufacturer:
Evotech Performance
8 Beechings Way, Alford, Lincolnshire, LN13 9JE
+44(0) 1507 466729
sales@evotech-performance.com

Importer / first distributor:
EVOTECH GERMANY
Lothar Westphal
Eichendorffstr. 9
78239 Rielasingen
Tel.07731 8229019
mail @ evotechparts.com

General safety instructions for the product:
We recommend that you always consult a specialist workshop when installing our products or have this work carried out by a specialist. If you fit it yourself, please make sure that your motorbike is secure and that the product is only intended for your motorbike. The models for which the product is tested and intended can be found with each item.
To avoid damage to your motorbike during installation, we recommend covering all important/sensitive parts.
Please understand that we cannot accept any liability for consequential damage caused by improper installation.
When fitting, use threadlocker if possible and observe the torque specifications.
There is no ABE/parts certificate for Evotech Performance accessories. If you have any concerns, you should refrain from buying them. In some cases, bolts for fastening must be replaced with the original bolts. Legally, this could be a problem. We would like to point this out.
General torque specifications can be found HERE

Note: When fitting Evotech handlebar end weights and Evotech brake lever protector kits, the rider is responsible for ensuring that the throttle response of the motorbike (correct play, smooth opening and closing of the throttle valve, etc.) is not affected in any way. Evotech handlebar end weights and Evotech Brake Lever Protector Kits are intended for use with the OE throttle tube and handlebar grip only.

Customer reviews

Unfortunately there are no reviews yet. Be the first who rates this product.

Customers who bought this product bought also the following products:

License plate holder Honda CBR 1000 RR-R...

EVOTECH licence plate holder suitable for the following models:
Honda CBR 1000 RR-R from 2020
This short licence plate holder was specially developed by Evotech for your Honda CBR 1000 RR-R to make it look even better.
You can still use the standard turn signals.
The Honda does not need to be modified in any way. All fixings and are included.
Good value for money and a real eye-catcher - this is how your Honda CBR 1000 RR-R should look from 2020.
Info: If the number plate illumination does not work, please swap the red/black cables. The manufacturer must have made a mistake with the first series.
INSTALLATION

293,80 Dollar

Reinforced number plate made of DIBOND® material 180 x 200 mm

Reinforced number plate (D) 180 x 200 mm...

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm

The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.

The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT

16,90 Dollar

This product was added to our catalog on Monday, March 18, 2024.