Radiator guard KTM 1290 SuperDuke GT from 2016 - Evotech Performance
Radiator guard SuperDuke GT / Adventure from Evotech Performance

Radiator guard SuperDuke GT / Adventure from Evotech Performance

Product No.:
PRN011841
1 item in stock 1 item in stock  (abroad may vary)
Weight:
0.3 kg per piece
110,70 Dollar

incl. 19% tax excl. Shipping costs

PayPal ECS

Customers who bought this product bought also the following products:

Oil lock screw - ORANGE - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
Oil lock screw - ORANGE - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
including sheet metal for receiving the safety wire.
The colour of the anodisation may change slightly when exposed to heat. This is not a reason for complaint, as it is unavoidable.
The rubber seal from the old lock can be reused....... YOUTUBE Video
33,75 Dollar
Reinforced number plate made of ALUCOBOND® material 180 x 200 mm
Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light ALUCOBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.
The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
We stuck the number plate with mirror tape with 3 strips. Optically perfect and holds.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
16,20 Dollar