MAIN PAGE » KTM » KTM 1290 » 1290 GT 2016 + » KTM 1290 GT up to 2016 License plate holder EVOTECH PERFOMANCE
KTM 1290 GT up to 2016 License plate holder EVOTECH PERFOMANCE
Machined from billet aluminium and matt black coated. The original license plate light (not included) is retained.
Plug & Play only, so no additional wiring is required.
Please note that this item cannot be used in the USA unless there are KTM LED displays.
Evotech Performance has designed and manufactured the license plate holder with CAD.W.T (Concealed Designed Wire Technology). The C.D.W.T is available only with the highest design and machining quality for which Evotech Performance is known.
INSTALLATION
Plug & Play only, so no additional wiring is required.
Please note that this item cannot be used in the USA unless there are KTM LED displays.
Evotech Performance has designed and manufactured the license plate holder with CAD.W.T (Concealed Designed Wire Technology). The C.D.W.T is available only with the highest design and machining quality for which Evotech Performance is known.
INSTALLATION
- Product safety/TÜV :
- Manufacturer:
Evotech Performance
8 Beechings Way, Alford, Lincolnshire, LN13 9JE
+44(0) 1507 466729
sales@evotech-performance.com
Importer / first distributor:
EVOTECH GERMANY
Lothar Westphal
Eichendorffstr. 9
78239 Rielasingen
Tel.07731 8229019
mail @ evotechparts.com
General safety instructions for the product:
We recommend that you always consult a specialist workshop when installing our products or have this work carried out by a specialist. If you fit it yourself, please make sure that your motorbike is secure and that the product is only intended for your motorbike. The models for which the product is tested and intended can be found with each item.
To avoid damage to your motorbike during installation, we recommend covering all important/sensitive parts.
When fitting, use threadlocker if possible and observe the torque specifications. The fixing screws on the licence plate holder in particular should be secured with threadlocker. Loss of the licence plate holder due to lost screws can cause unpleasant damage.
General torque specifications can be found HERE
Licence plate holders from Great Britain do not have an ABE. The licence plate lighting has an E approval mark. The indicator spacing is 180 mm. Suitable adapters are usually included to bring the indicator spacing to the legally required 180 mm.
The legally required licence plate angle of 30 degrees cannot be complied with on all British licence plate holders, as they are mounted much further in the direction of travel and may come into contact with the tyre at 30 degrees.
The angle of 30 degrees must be checked and adjusted on the vehicle. Take the suspension travel of the motorbike into account. If space is tight, we recommend fitting the narrower version of the rear reflector.
We have also provided further information on TÜV/ABE HERE.
Unfortunately there are no reviews yet. Be the first who rates this product.
You must be logged in to submit a review. Login
Customers who bought this product bought also the following products:
This product was added to our catalog on Sunday, May 5, 2019.