evotech-led-plate illumination
evotech-led-plate illumination
Preview: evotech-led-plate illumination
Preview: evotech-led-plate illumination
Taillight / License plate illumination Evotech Performance - clear glass
evotech-led-plate illumination
evotech-led-plate illumination
Mobile Preview: evotech-led-plate illumination
Mobile Preview: evotech-led-plate illumination

Taillight / License plate illumination Evotech Performance - clear glass

Product No.:
PRN003011-C4
immediately ready for dispatch immediately ready for dispatch (abroad may vary)
Weight:
0.1 kg per piece
46,02 Dollar

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description
Evotech Performance combination taillight / license plate light.
This LED light is a brake and license plate light in one.
The light is marked with E number plate and fully homologated.
This lamp may only be connected to the corresponding power lines of the motorcycle.
Dimension: 108 x 50 mm. Screw spacing from centre to centre: 81mm.
A direct connection to 12 Volt on-board voltage will damage the LEDs.
For testing on 5 volts:
Yellow on plus and black on minus = BRAKE
Red on plus and black on minus = Rear light with license plate illumination.
Customer reviews

Unfortunately there are no review yet. Be the first who rate this product.

Your opinion

Customers who bought this product bought also the following products:

KTM 790 / 1050 / 1090 / 1290 Adventure axle guard front axle
KTM 790 / 1050 / 1090 / 1290 Adventure axle...
Features of the Evotech Performance front axle impact protector for the KTM Adventure models 790, 1050, 1090, 1290.
This front wheel axle protector fits the following Models
        Robust nylon coil heads with aluminium core
        Mounted through the axle of the front fork
        Includes spindle rod and all necessary nuts
        Evotech Performance manufacturing using the highest quality materials
        Individual replacement spools can be purchased separately
INSTALLATION
54,28 Dollar
Reinforced number plate made of DIBOND® material 180 x 200 mm
Reinforced number plate (D) 180 x 200 mm...

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm

The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.

The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
15,34 Dollar
Rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - Orange - left
Rear axle nut in duralumin for KTM 1290...
Very high quality duraluminium nut (7075T6) for the left side of the rear wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut left side with 41 mm wrench size.
57,82 Dollar
Number plate holder for KTM 1290 Super Duke R - from 2020 by EVOTECH PERFORMANCE
KTM 1290 Super Duke R - License plate holder...
Suitable for the 1290 KTM Super Duke R 2020 +  (does not fit on the RR)
Evotech Performance has designed and manufactured a KTM Superduke license plate holder with CAD.W.T (Concealed Designed Wire Technology).  The C.D.W.T is only achievable with the highest design and quality machining for which Evotech Performance is known.
Machined from billet aluminium and matt black coated. The original license plate light and turn signals (not included) are retained.
A new license plate light with matching adapter is included.
Plug & Play only, so no additional wiring is required. Incl. Reflektorkit.
If you need a reinforced noble number plate, look HERE
Info: If the license plate light does not work, please exchange the cables. With the first series the manufacturer probably made a mistake.
INSTALLATION
312,70 Dollar
This product was added to our catalog on Saturday, July 13, 2019.