MAIN PAGE » DUCATI » Multistrada 950, V2, 1200, 1260 » Ducati Multistrada 950, V2, 1200, 1260 licence plate holder from Evotech Performance

Ducati Multistrada 950, V2, 1200, 1260 licence plate holder from Evotech Performance

Description

Evotech Performance has designed and manufactured a perfectly fitting rear end for your Ducati Multistrada.
CNC machined and moulded aluminium tail light bracket, indicator bracket and licence plate holder in aluminium (black powder coated for long life).
Our design includes a vacuum moulded plastic replacement base for a clean OEM finish.
The mounting is done using existing mounting points and definitely without any modifications to the motorbike
We have reused the original number plate light and turn signals, just plug it in and get started.
All necessary fastening elements are included in the kit.
The reflector kit is included in the scope of delivery.
The original serial indicators and license plate light can be used.
Our rear body is fully compatible with the OEM bags and the top box.

Ducati Multistrada 1260 S Grand Tour 2020+
Ducati Multistrada 950 2017 - 2018
Ducati Multistrada 1200 2015 - 2017
Ducati Multistrada 1200 Enduro 2016 - 2018
Ducati Multistrada 1200 Enduro Pro 2017 - 2018
Ducati Multistrada 1200 Pikes Peak 2016 - 2017
Ducati Multistrada 1200 S 2015 - 2017
Ducati Multistrada 1200 S D air 2015 - 2017
Ducati Multistrada 1260 D/Air 2018+
Ducati Multistrada 1260 Enduro 2019+
Ducati Multistrada 1260 Enduro Pro (2019+)
Ducati Multistrada 1260 Pikes Peak 2018+
Ducati Multistrada 1260 S 2018+
Ducati Multistrada 950 2019+
Ducati Multistrada 950 S 2019+
Ducati Multistrada 1260 2018+
Ducati Multistrada V2 / V2S 2022 +

Here is a complete overview of the MODELS on which this licence plate holder fits.
INSTALLATION

Products Safety/TÜV

Product safety/TÜV :: Manufacturer:
Evotech Performance
8 Beechings Way, Alford, Lincolnshire, LN13 9JE
+44(0) 1507 466729
sales@evotech-performance.com

Importer / first distributor:
EVOTECH GERMANY
Lothar Westphal
Eichendorffstr. 9
78239 Rielasingen
Tel.07731 8229019
mail @ evotechparts.com

General safety instructions for the product:
We recommend that you always consult a specialist workshop when installing our products or have this work carried out by a specialist. If you fit it yourself, please make sure that your motorbike is secure and that the product is only intended for your motorbike. The models for which the product is tested and intended can be found with each item.
To avoid damage to your motorbike during installation, we recommend covering all important / sensitive parts.
The licence plate holders are designed for a size of 180 x 200 mm.
If you mount a plate under the licence plate, make sure that it does not weigh more than 150 grams. We know of cases where 3 mm solid aluminium plates weighing 300 grams have been fitted. This is too much for the bracket. OUR plate weighs 150 grams
Please understand that we cannot accept any liability for consequential damage caused by incorrect installation.
When fitting, use threadlocker if possible and observe the torque specifications. The fixing screws on the licence plate holder in particular should be secured with threadlocker. Loss of the licence plate holder due to lost screws can cause unpleasant damage.
General torque specifications can be found HERE

Licence plate holders from Great Britain do not have an ABE. The licence plate light (if one is included in the scope of delivery) has an E approval mark. The indicator spacing is 180 mm. Suitable adapters are usually included to bring the indicator spacing to the legally required 180 mm. The legally required licence plate angle of 30 degrees cannot be complied with on all British licence plate holders, as they are mounted much further in the direction of travel and may come into contact with the tyre at 30 degrees. The angle of 30 degrees must be checked and adjusted on the vehicle. Take the suspension travel of the motorbike into account. If space is tight, we recommend fitting the narrower version of the rear reflector. We have also provided further information on TÜV/ABE HERE.
Information for our Austrian customers specifically for the type approval or registration of licence plate holders can be found HERE
INSTALLATION INSTRUCTIONS:
For ecological reasons, we do not print out installation instructions or include them with the delivery.
Because of 1 x installation! We recommend (as we do the first time) to take the tablet or laptop with you to the workshop.

Customer reviews (2)

Unfortunately there are no reviews yet. Be the first who rates this product.

Customers who bought this product bought also the following products:

Reinforced number plate made of DIBOND® material 180 x 200 mm

Reinforced number plate (D) 180 x 200 mm...

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm

The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.

The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT

16,25 Dollar

This product was added to our catalog on Wednesday, September 2, 2020.