MAIN PAGE » DUCATI » Multistrada V4 2021+ » Ducati Multistrada Navigationshalter SP Connect von Evotech Performance

Ducati Multistrada Navigationshalter SP Connect von Evotech Performance

Features of the SP Connect compatible nav mount for the Ducati Multistrada V4. All MODELS

    Places a smartphone centrally in front of the rider
    Attaches via the screen mount frame
    SP Connect mounting point already integrated into the EP mount
    All other mounting parts are included in the kit
    Wing screws can be used to adjust the angle of the screen
INSTALLATIONS Guide

What is a motorcycle phone mount?
To access your smartphone while riding for applications such as audio and GPS, EP has developed the SP Connect compatible nav mount.   Made of lightweight aluminum and finished with EP's signature black powder coat, the mount can be attached to the screen mount using the online step-by-step instructions.   With the SP Connect mount already in place, riders can secure their smartphone in their choice of SP Connect smartphone case. The angle of the screen can be fine-tuned with the thumbscrews behind the mount.

Note: Our mount works in conjunction with the SP micro stem mount alu #53122 and anti-vibration module #53135. SP Connect interface plate #53122.
Smartphone case, connection cable and smartphone are not included.

Customer reviews

Unfortunately there are no reviews yet. Be the first who rates this product.

Your opinion

Customers who bought this product bought also the following products:

Ducati Multistrada V4 - Water and oil cooler...

The water and oil cooler protection set from Evotech Performance is attached to the existing mounting points of your motorcycle.
As with all protection sets from Evotech Performance is no modification to the motorcycle required.
The benefit of this water and oil cooler guard set for your Ducati Multistrada V4 with its hexagonal hole pattern, is maximum protection from road debris.
The hexagonal hole pattern optimizes the airflow in the best possible way.
CNC machined from aircraft grade aluminum.
Powder coated black for durability.
All necessary fasteners are supplied with the kit.
Suitable for the following MODELS
INSTALLATION guide shows you how to mount it and what is included.

162,84 Dollar

Reinforced number plate made of DIBOND® material 180 x 200 mm

Reinforced number plate (D) 180 x 200 mm...

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm

The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.

The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT

15,34 Dollar

Ducati Multistrada V4 number plate holder...

Evotech Performance has designed and manufactured a number plate holder for the Ducati Multistrada V4 range.
Fits the following MODELS
Does not fit on the "RALLY"
CNC machined aluminium replacement tail light bracket, indicator brackets and number plate bracket.
The design includes a vacuum formed plastic underbody protector for a clean finish.
This number plate holder from Evotech Performance attaches to the existing mounting points on your Ducati Multistrada V4 and definitely requires no modifications to your bike.
The jewel is powder-coated black for durability.
The rear radar system is still fully functional.
You can still use your existing number plate lighting and original turn signals. Just plug it in and go.
All necessary fastening elements are included in the kit.
A REFLECTORKIT is not included.
If you still need a suitable number plate, we can recommend this one: ALUCOBOND® Plate
This licence plate holder is fully compatible with the OEM cases and the top box.
An easy to understand, illustrated manual is available for download if you want to know how to mount the part: INSTALLATION

364,62 Dollar

Ducati Streetfighter V4 / V4 S from 2020...

This license plate holder from EVOTECH PERFORMANCE for your Ducati Streetfighter V4 from 2020 onwards and is CNC milled from light aircraft aluminium.
With a robust, satin black powder coating.
Fitting: Ducati Streetfighter V4 / V4 S ab 2020
The original turn signals can still be used.
The LED number plate lighting is included in the scope of delivery.
This license plate holder was developed especially for the existing holders on your DUCATI Streefighter and does not require any changes on your bike.
No changes to the wiring are necessary, just plug and play.
All necessary mountings are included in the delivery.
Included Reflectorkit
If you need a reinforced noble number plate, look HERE
An easy to understand pictorial manual is available here:INSTALLATION

312,70 Dollar

This product was added to our catalog on Monday, January 24, 2022.