MAIN PAGE » KAWASAKI » Z 900 RS » Kawasaki Z 900 RS licence plate holder EVOTECH PERFORMANCE from 2018






Kawasaki Z 900 RS licence plate holder EVOTECH PERFORMANCE from 2018
- Product No.:
- PRN013913-H5
- Shipping time:
-
soon available again (abroad may vary)
- Stock:
- pieces
- Weight:
- 0.85 kg per piece
This item is not in stock at the moment. You can still order it, but you will have to wait. INFO on the arrears can be found on the start page.
Suitable for the following MODELS
This short license plate holder was developed by Evotech especially for your Kawasaki Z 900 RS to make it look even better.
The license plate holder from Evotech Performance fully integrates into the sporty lines of your Kawasaki Z 900 RS and is easy to mount with the original holders.
You can still use the standard turn signals and license plate light.
The Kawasaki Z 900 RS does not need to be modified in any way. All mountings and are included.
INSTALLATION
This short license plate holder was developed by Evotech especially for your Kawasaki Z 900 RS to make it look even better.
The license plate holder from Evotech Performance fully integrates into the sporty lines of your Kawasaki Z 900 RS and is easy to mount with the original holders.
You can still use the standard turn signals and license plate light.
The Kawasaki Z 900 RS does not need to be modified in any way. All mountings and are included.
INSTALLATION
- Product safety/TÜV :
- Manufacturer:
Evotech Performance
8 Beechings Way, Alford, Lincolnshire, LN13 9JE
+44(0) 1507 466729
sales@evotech-performance.com
Importer / first distributor:
EVOTECH GERMANY
Lothar Westphal
Eichendorffstr. 9
78239 Rielasingen
Tel.07731 8229019
mail @ evotechparts.com
General safety instructions for the product:
We recommend that you always consult a specialist workshop when installing our products or have this work carried out by a specialist. If you fit it yourself, please make sure that your motorbike is secure and that the product is only intended for your motorbike. The models for which the product is tested and intended can be found with each item.
To avoid damage to your motorbike during installation, we recommend covering all important / sensitive parts.
The licence plate holders are designed for a size of 180 x 200 mm.
If you mount a plate under the licence plate, make sure that it does not weigh more than 150 grams. We know of cases where 3 mm solid aluminium plates weighing 300 grams have been fitted. This is too much for the bracket. OUR plate weighs 150 grams
Please understand that we cannot accept any liability for consequential damage caused by incorrect installation.
When fitting, use threadlocker if possible and observe the torque specifications. The fixing screws on the licence plate holder in particular should be secured with threadlocker. Loss of the licence plate holder due to lost screws can cause unpleasant damage.
General torque specifications can be found HERE
Licence plate holders from Great Britain do not have an ABE. The licence plate light (if one is included in the scope of delivery) has an E approval mark. The indicator spacing is 180 mm. Suitable adapters are usually included to bring the indicator spacing to the legally required 180 mm. The legally required licence plate angle of 30 degrees cannot be complied with on all British licence plate holders, as they are mounted much further in the direction of travel and may come into contact with the tyre at 30 degrees. The angle of 30 degrees must be checked and adjusted on the vehicle. Take the suspension travel of the motorbike into account. If space is tight, we recommend fitting the narrower version of the rear reflector. We have also provided further information on TÜV/ABE HERE.
Information for our Austrian customers specifically for the type approval or registration of licence plate holders can be found HERE
INSTALLATION INSTRUCTIONS:
For ecological reasons, we do not print out installation instructions or include them with the delivery.
Because of 1 x installation! We recommend (as we do the first time) to take the tablet or laptop with you to the workshop.
Unfortunately there are no reviews yet. Be the first who rates this product.
You must be logged in to submit a review. Login
Customers who bought this product bought also the following products:

This radiator guard fits exactly to the existing mounting points on your Kawasaki.
Fits Kawasaki Z 900 RS from 2021 onwards.
No modifications to your bike are required.
Hexagonal hole pattern to optimise airflow with maximum protection from road debris.
CNC machined from aircraft grade aluminium.
Powder coated black for durability.
All necessary screws & mounting hardware included.
Installation time approx. 20 min.
INSTALLATION
Fits Kawasaki Z 900 RS from 2021 onwards.
No modifications to your bike are required.
Hexagonal hole pattern to optimise airflow with maximum protection from road debris.
CNC machined from aircraft grade aluminium.
Powder coated black for durability.
All necessary screws & mounting hardware included.
Installation time approx. 20 min.
INSTALLATION
115,62 Dollar
.jpg)
Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm
The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT
15,99 Dollar
This product was added to our catalog on Thursday, March 26, 2020.