MAIN PAGE » KAWASAKI » Z 900 » Kawasaki Z 900 radiator protection from 2017 by Evotech Performance

Kawasaki Z 900 radiator protection from 2017 by Evotech Performance

This radiator guard fits exactly to the existing mounting points on your Kawasaki Z 900 / ZR900F
Suitable for following MODELS
No changes to your motorcycle are necessary.
Hexagonal hole pattern to optimize airflow while providing maximum protection from road debris.
CNC machined from aircraft aluminum.
Black powder coated for durability.
All necessary screws & mounting parts are included.
Assembly time approx. 20 min.
INSTALLATION

Products Safety/TÜV

Product safety :: Manufacturer:
Evotech Performance
8 Beechings Way, Alford, Lincolnshire, LN13 9JE
+44(0) 1507 466729
sales@evotech-performance.com

Importer / first distributor:
EVOTECH GERMANY
Lothar Westphal
Eichendorffstr. 9
78239 Rielasingen
Tel.07731 8229019
mail @ evotechparts.com

General safety instructions for the product:
We recommend that you always consult a specialist workshop when installing our products or have this work carried out by a specialist. If you fit it yourself, please make sure that your motorbike is secure and that the product is only intended for your motorbike. The models for which the product is tested and intended can be found with each item.
To avoid damage to your motorbike during installation, we recommend covering all important/sensitive parts.
When fitting, use threadlocker if possible and observe the torque specifications.
There is no ABE/parts certificate for Evotech Performance accessories. If you have any concerns, you should refrain from buying them. In some cases, bolts for fastening must be replaced with the original bolts. Legally, this could be a problem. We would like to point this out.
General torque specifications can be found HERE

Customer reviews

Unfortunately there are no reviews yet. Be the first who rates this product.

Customers who bought this product bought also the following products:

Reinforced number plate made of DIBOND® material 180 x 200 mm

Reinforced number plate (D) 180 x 200 mm...

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm

The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.

The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT

15,73 Dollar

This product was added to our catalog on Monday, June 8, 2020.